Hi Steve,

What do you need a pdf for? The set will work nicely with your starter set, and they are easy to set up.

Cheers….

Mike

Hi,

my two cents :





Best Regards
Joël

Edited by user 20 February 2025 12:11:48(UTC)  | Reason: Not specified

Joël et al,

My 5191E arrived this afternoon. It didn't have instructions so I printed your images and went to see what I could do. I plugged things in the best I could. The locomotive runs. A little light on the turnout lights up. Pushing the buttons on the 7072 does nothing. But I'm missing a connection somehow. My transformer only has three terminals, brown, red and yellow labeled O, B and L, respectively (hard to read). I'm running wires from the brown and red to the feeder track and the yellow to the 7072, as in your picture. It looks like I also need to run a brown wire to the end of the 7072. Do I need another 7209 and some more wire to conned the transformer's brown terminal to both the track and the blue box? (I see them for under USD 10.00 on eBay.)

Thanks to all for your advice! In the meantime

Steve

PS Here's a link to the other instructions I found--

Thanks, Robert! I'm heading to eBay now.