I have several old semaphores that I acquired in a “mystery” box purchase about 10 years ago that I’ve never incorporated into my layout. I’d like to try to re-use those in my current layout but am at a total loss for wiring them. I currently have a couple of Marklin 74391 Color Light Block Signals in my layout working as expected connected to a M84. I use a CS3+ with the layout controlled via Rocrail. Thus, I am not using braking modules/sections nor will I use the M84 for track control but instead just for signal control. Below are some pics of one of the signals in question. I have no idea of brand or model number for the semaphores. There are 6 wires on the signal with 2 of them seemingly paired in a red sleeve and another 2 seemingly paired without a sleeve. The other 2 wires are separate one from the other with each having a black sleeve. Any thoughts or suggestions on how I might wire them to a M84 port would be much appreciated!