Joined: 19/03/2014(UTC)
Posts: 6
|
Hi, can somebody tell me how to change adress on the decoder on the locomotive with the CS3. I have adding a lot of locomotives to the CS3 and found that the 36080 and the 28590 have the same adress (24). I now want to change one of these adresses, prefably on the 36080. I have conected a piece of track to the "programming track"-connection on the CS3 but it doesn´t seem to change anything and I can´t find any answers in the large manual. Gratefull for any answers. Best regards Henrik
|
|
|
|
|
|
 Joined: 04/02/2011(UTC) Posts: 3,559 Location: Paris, France
|
Hi Henna Originally Posted by: henna  Hi, can somebody tell me how to change adress on the decoder on the locomotive with the CS3. I have adding a lot of locomotives to the CS3 and found that the 36080 and the 28590 have the same adress (24). I now want to change one of these adresses, prefably on the 36080. I have conected a piece of track to the "programming track"-connection on the CS3 but it doesn´t seem to change anything and I can´t find any answers in the large manual. Gratefull for any answers. Best regards Henrik The 36080 is a programmable FX decoder. With a CS3, you must install your loco ALONE on the programming track (no Fx decoder programming on the main track. 1 & 2- Select Edit locos by pulling UP the red tab 3- Select the loco you wish (here an Fx loco)  4- In the fierld Address, click on it and then enter the new address WHILE POWER IS ON (Stop bar is NOT lit)  Validate The locos headlight will blink on both sides When finished BOTH the loco and the CS3 have a new address Cheers Jean |
|
 1 user liked this useful post by JohnjeanB
|
|
|
|
Joined: 19/03/2014(UTC)
Posts: 6
|
Hi and thank You very much Jean. Very helpfull information. Best regards
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
