Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline henna  
#1 Posted : 10 September 2023 20:38:35(UTC)
henna


Joined: 19/03/2014(UTC)
Posts: 6
Hi, can somebody tell me how to change adress on the decoder on the locomotive with the CS3. I have adding a lot of locomotives to the CS3 and found that the 36080 and the 28590 have the same adress (24). I now want to change one of these adresses, prefably on the 36080. I have conected a piece of track to the "programming track"-connection on the CS3 but it doesn´t seem to change anything and I can´t find any answers in the large manual. Gratefull for any answers. Best regards Henrik
Offline JohnjeanB  
#2 Posted : 10 September 2023 21:59:51(UTC)
JohnjeanB

France   
Joined: 04/02/2011(UTC)
Posts: 3,209
Location: Paris, France
Hi Henna
Originally Posted by: henna Go to Quoted Post
Hi, can somebody tell me how to change adress on the decoder on the locomotive with the CS3. I have adding a lot of locomotives to the CS3 and found that the 36080 and the 28590 have the same adress (24). I now want to change one of these adresses, prefably on the 36080. I have conected a piece of track to the "programming track"-connection on the CS3 but it doesn´t seem to change anything and I can´t find any answers in the large manual. Gratefull for any answers. Best regards Henrik

The 36080 is a programmable FX decoder.
With a CS3, you must install your loco ALONE on the programming track (no Fx decoder programming on the main track.
1 & 2- Select Edit locos by pulling UP the red tab
3- Select the loco you wish (here an Fx loco)
cs3_Edit Locos.png

4- In the fierld Address, click on it and then enter the new address WHILE POWER IS ON (Stop bar is NOT lit)
cs3_Enter Loco Address.png
Validate
The locos headlight will blink on both sides
When finished BOTH the loco and the CS3 have a new address

Cheers
Jean

thanks 1 user liked this useful post by JohnjeanB
Offline henna  
#3 Posted : 11 September 2023 16:49:19(UTC)
henna


Joined: 19/03/2014(UTC)
Posts: 6
Hi and thank You very much Jean. Very helpfull information. Best regards
Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.443 seconds.