 Joined: 16/10/2017(UTC) Posts: 5 Location: Lazio, Rome
|
Good evening everyone, a courtesy.
I bought an old Marklin 1 scale start set (code 5531) containing the BR 80 031 locomotive.
However, the package does not include the instruction manual of the locomotic (code 5710).
Do any of you have this manual?
Greetings
Luca
|
|
|
|
|
|
Joined: 28/01/2004(UTC) Posts: 632
|
Dear Luca, I'm italian too and I'm glad to see you here, Unfortuantely I'ven't this set and so I'ven't any Manual for you. Anyway I can tell it is a very good set and you've just to connect the red and brown cables to your Trafo and everything will be working fine. For changing direction you've just to pull down the red kooble of your Trafo. I'm sure you'll be able to enjoy a lot your train. Don''t fprget you can mske your loko smoking too. You only need to put some drops of Märklin smoke fluid on the chimenery. Let me knoe if it is useful. Best regards Stefano Rocca Originally Posted by: LDonati  Good evening everyone, a courtesy.
I bought an old Marklin 1 scale start set (code 5531) containing the BR 80 031 locomotive.
However, the package does not include the instruction manual of the locomotic (code 5710).
Do any of you have this manual?
Greetings
Luca
|
|
|
|
|
|
 Joined: 17/09/2006(UTC) Posts: 18,771 Location: New Zealand
|
There's a copy of the 5710 exploded diagram manual posted in the following thread, but no actual operation manual. I've been helping to pack up some 1 Gauge items recently which include several of these locos, so I will see if there are any manuals which I could take a quick scan of. https://www.marklin-user...p-for-digital-conversion (post #13) Perhaps the original poster of the above thread can offer you some assistance with conversion of your BR80 loco.
|
|
|
|
|
|
Joined: 16/10/2017(UTC) Posts: 5 Location: Lazio, Rome
|
Originally Posted by: Rocca Dear Luca, I'm italian too and I'm glad to see you here, Unfortuantely I'ven't this set and so I'ven't any Manual for you. Anyway I can tell it is a very good set and you've just to connect the red and brown cables to your Trafo and everything will be working fine. For changing direction you've just to pull down the red kooble of your Trafo. I'm sure you'll be able to enjoy a lot your train. Don''t fprget you can mske your loko smoking too. You only need to put some drops of Märklin smoke fluid on the chimenery. Let me knoe if it is useful. Best regards Stefano Rocca Originally Posted by: LDonati Good evening everyone, a courtesy.
I bought an old Marklin 1 scale start set (code 5531) containing the BR 80 031 locomotive.
However, the package does not include the instruction manual of the locomotic (code 5710).
Do any of you have this manual?
Greetings
Luca Stefano good morning, in fact the locomotive is not complicated (I have recently replaced the bulbs because they are missing) but I was pleased to have the instruction manual for maintenance (for example the brushes). However, I would like to point out that this locomotive is NOT equipped with a smoke device. Greetings Luca
|
|
|
|
|
|
 Joined: 12/04/2021(UTC) Posts: 5 Location: Trinity Beach, Queensland
|
Hi Luca,
I have the manual that came with my BR80 and I am happy to make copies/photos of this manual and email them to you.
Regards,
Doc
|
|
|
|
|
|
Joined: 16/10/2017(UTC) Posts: 5 Location: Lazio, Rome
|
Originally Posted by: Doc.Calladine Hi Luca,
I have the manual that came with my BR80 and I am happy to make copies/photos of this manual and email them to you.
Regards,
Doc Thanks so much! You have a private message. Hello Luca
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
