 Joined: 20/10/2014(UTC) Posts: 30 Location: TEL AVIV, YAFO
|
Hi guys
try to find in this forum and JMRI forum with nothing to "fish"
I try to connect the JMRI control software to the CS3 but it does not work . Did someone use the CS3 with JMRI ?? try to use the TrainController in demo model and it work with out no problem
Regards Doron
|
Regards
Doron |
|
|
|
|
|
 Joined: 11/06/2007(UTC) Posts: 208 Location: Eslöv, Sweden
|
|
|
|
|
|
|
Joined: 20/10/2014(UTC) Posts: 30 Location: TEL AVIV, YAFO
|
hi
Thanks for try to help but the facts are that it does not work with software A and works with software B so I suppose there is some problem and I try to use a network analyzer and saw that packets from software B ( (TrainControler) are transmitted in TCP protocol and from software A ( JMRI ) in UDP protocol so there is may be something that I have config in the JMRI so it will work
Doron |
Regards
Doron |
|
|
|
|
|
 Joined: 12/12/2005(UTC) Posts: 2,448 Location: Wellington, New_Zealand
|
Originally Posted by: sonra  ... but it does not work ... Not exactly the most descriptive.... The CS3 (and CS2) primarily use UDP TCP may be seen in the context of a CS1 and/or a CS1 connecting to a CS2/3 as a slave. With the preferences set correctly with Marklin, CS2 and the ip address you will see the state reflected under Active Profile when opening PanelPro If you are already using a layout control software then JMRI is probably not much use. JMRI has (had) a focus on the DecoderPro programming of decoders. This function (including SoundPro) is not available for use with the CS2/3 |
Peter
|
 1 user liked this useful post by clapcott
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
