Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline ocram63_uk  
#1 Posted : 25 May 2020 12:21:11(UTC)
ocram63_uk

United Kingdom   
Joined: 07/01/2015(UTC)
Posts: 342
Location: England, Suffolk
Just a thought, I have a 7186 and a spare m83 decoder.
My EcOS has the possibility to control a turntable which I have
enabled in one of the layout diagrams.
Will the m83 pilot the 7186 roundtable via the EcOS?
After all it has to give the initial impulse to the motor as the turntable is powered by a white transformer.
Just a thought
Marco
Offline JohnjeanB  
#2 Posted : 25 May 2020 14:27:18(UTC)
JohnjeanB

France   
Joined: 04/02/2011(UTC)
Posts: 935
Location: Paris, France
Hi Marco
The 7186 needs:
- a switch (like 84) to set the direction by sending a +16VAC (L) to one of the extremity plugs
- an impulse to set the TT in motion by connecting the center plug to +16VAC (L)
Note: the other ends of the Solenoid and the motor are connected to the ground (0) This is the separate plug on the TT
So in short, the best is to use an M84 (2 outputs)
Cheers
Jean

Edited by user 26 May 2020 11:38:15(UTC)  | Reason: Not specified

My lay-out videos
latest vid
humping yard
Offline DaleSchultz  
#3 Posted : 25 May 2020 15:27:52(UTC)
DaleSchultz

United States   
Joined: 10/02/2006(UTC)
Posts: 3,397
this may help:

https://cabin-layout.mixmox.com/2004/12/Digitizing-turntable-7286.html

The switching module I used is similar to the '84 items from Märklin
Dale
Intellibox + own software, K-Track
My current layout: https://cabin-layout.mixmox.com
Arrival and Departure signs: https://remotesign.mixmox.com
Offline ocram63_uk  
#4 Posted : 26 May 2020 10:20:55(UTC)
ocram63_uk

United Kingdom   
Joined: 07/01/2015(UTC)
Posts: 342
Location: England, Suffolk
so, the m83 decoder is no good at all to do what I have in mind :-(
This is bad.
Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2020, Yet Another Forum.NET
This page was generated in 0.202 seconds.