Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline Marklin in Oz  
#1 Posted : 30 September 2014 09:37:28(UTC)
Marklin in Oz

United States   
Joined: 24/11/2011(UTC)
Posts: 228
Location: Lawrence Kansas
Good day all. I've currently got a bit of a quandary. I'm looking to install a railroad crossing across a span of double track pictured below.

UserPostedImage

Originally, I was going to do so by setting railroad ties cross ways (Parallel with the rails) across the tracks and center ballast.

UserPostedImage

The problem however is that they're too thick. They would stand above the third rail and pickup shoes would lose contact. I've thought about sanding some down, but I'm not sure how I would do so and keep them all uniform in their thickness. I've also considered a paper option, but really don't know how well that would work as far as looks.

I'm open to suggestions.
Confused
-Fred
Offline RayF  
#2 Posted : 30 September 2014 10:54:28(UTC)
RayF

Gibraltar   
Joined: 14/03/2005(UTC)
Posts: 15,838
Location: Gibraltar, Europe
Hi Fred,

It's not an easy thing to do. I used a Faller level crossing on my layout, and they bring some planked sections of plastic for laying in the track, but they also stick up above the level of the pukos. I also experimented with bits of card, but they tend to curl up and catch the pickup shoe.

In the end I decided to ignore the part of roadway inside the tracks, and just laid card and plastic strips up to the outsides of the rails. I then painted the middle of the tracks the same colour as the roadway and at first glance it looks OK.
Ray
Mostly Marklin.Selection of different eras and European railways
Small C track layout, control by MS2, 100+ trains but run 4-5 at a time.
thanks 2 users liked this useful post by RayF
Offline Alsterstreek  
#3 Posted : 30 September 2014 11:01:52(UTC)
Alsterstreek

Germany   
Joined: 16/11/2011(UTC)
Posts: 5,666
Location: Hybrid Home
I always use "Viessmann 5102 Gleisfüllstück H0". It is quite cheap and works on curved track, too.
Alsterstreek attached the following image(s):
gleissfst.png
thanks 7 users liked this useful post by Alsterstreek
Offline Alsterstreek  
#4 Posted : 30 September 2014 11:17:05(UTC)
Alsterstreek

Germany   
Joined: 16/11/2011(UTC)
Posts: 5,666
Location: Hybrid Home
Here a German (albeit illustrated) description of how to use a salvaged M track center piece for creating a realistic grade level crossing - click on link:

http://stummiforum.de/vi...pic.php?p=592180#p592180

And some homemade alternatives - see pic.
Alsterstreek attached the following image(s):
wired.png
thanks 4 users liked this useful post by Alsterstreek
Offline mike c  
#5 Posted : 30 September 2014 21:42:05(UTC)
mike c

Canada   
Joined: 28/11/2007(UTC)
Posts: 7,880
Location: Montreal, QC
What about simply painting the appropriate section the colour of the street or crossing. This way, it would appear to be paved, but would not outright interfere with the operation of the trains?
The other option would be installing the Maerklin Crossing with add on for multiple tracks which has all the necessary parts.

Regards

Mike C
thanks 2 users liked this useful post by mike c
Offline MS 800  
#6 Posted : 30 September 2014 23:14:53(UTC)
MS 800

Germany   
Joined: 31/03/2014(UTC)
Posts: 36
Location: Ostalb, Württemberg
... or use strips of brass sheet instead of wooden sleepers - at least for the two middle ones. The brass can be connected to the centre stud contacts either by directly soldering them together or by wiring it accordingly. It even can be given a dark surface finish by an appropriate stain (no paint).

In Germany, in newer level crossings the gap between the rails is filled by a rubber mat like that one:
UserPostedImage

This can also be imitated by a piece of brass sheet with a structured surface
UserPostedImage

stained dark (deepnes of blackening can be adjusted by time of treastment)
UserPostedImage

and connected to the centre studs.

Best regards

MS 800
When we were kids we enjoyed our tinplate trains rattling over tinplate tracks - nowadays they're in need of sound decoders.
thanks 6 users liked this useful post by MS 800
Offline Marklin in Oz  
#7 Posted : 01 October 2014 04:42:57(UTC)
Marklin in Oz

United States   
Joined: 24/11/2011(UTC)
Posts: 228
Location: Lawrence Kansas
Thanks for the responses everyone. I like Ray's idea with the card stock, but to prevent curling, I'm thinking I could use sheet plastic.
-Fred
thanks 1 user liked this useful post by Marklin in Oz
Offline RayF  
#8 Posted : 01 October 2014 08:42:25(UTC)
RayF

Gibraltar   
Joined: 14/03/2005(UTC)
Posts: 15,838
Location: Gibraltar, Europe
Originally Posted by: Marklin in Oz Go to Quoted Post
Thanks for the responses everyone. I like Ray's idea with the card stock, but to prevent curling, I'm thinking I could use sheet plastic.
-Fred


Fred, here's a tip you might not have thought of. Old credit and debit cards are a great source of thin plastic for projects like this. It's tough and doesn't curl up easily. I keep a stock of old cards for this purpose.
Ray
Mostly Marklin.Selection of different eras and European railways
Small C track layout, control by MS2, 100+ trains but run 4-5 at a time.
thanks 5 users liked this useful post by RayF
Offline jvuye  
#9 Posted : 01 October 2014 12:10:39(UTC)
jvuye

Belgium   
Joined: 01/03/2008(UTC)
Posts: 2,881
Location: South Western France
Originally Posted by: RayF Go to Quoted Post
Originally Posted by: Marklin in Oz Go to Quoted Post
Thanks for the responses everyone. I like Ray's idea with the card stock, but to prevent curling, I'm thinking I could use sheet plastic.
-Fred


Fred, here's a tip you might not have thought of. Old credit and debit cards are a great source of thin plastic for projects like this. It's tough and doesn't curl up easily. I keep a stock of old cards for this purpose.


Smart! Very smart!ThumpUp
One for the "things to remember" file!
Cheers
Jacques Vuye aka Dr.Eisenbahn
Once a vandal, learned to be better and had great success!
thanks 3 users liked this useful post by jvuye
Offline Marklin in Oz  
#10 Posted : 01 October 2014 12:16:57(UTC)
Marklin in Oz

United States   
Joined: 24/11/2011(UTC)
Posts: 228
Location: Lawrence Kansas
Originally Posted by: RayF Go to Quoted Post
Originally Posted by: Marklin in Oz Go to Quoted Post
Thanks for the responses everyone. I like Ray's idea with the card stock, but to prevent curling, I'm thinking I could use sheet plastic.
-Fred


Fred, here's a tip you might not have thought of. Old credit and debit cards are a great source of thin plastic for projects like this. It's tough and doesn't curl up easily. I keep a stock of old cards for this purpose.


I've already got some some pieces of sheet plastic floating around, but as jvuye noted that's a damn fine idea.
Smile
-Fred
thanks 1 user liked this useful post by Marklin in Oz
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.543 seconds.