marklin-users.net community | Forum
»
General topics
»
H0-scale
»
Can't find decoder info to set up run on analog n layout.
Joined: 15/04/2024(UTC) Posts: 3 Location: California, Garden Grove
|
Hello Everyone, I am new to Marklin world. I have an AC M track layout. Last week I bought a Marklin train from Ebay as-is. When I opened the top and found out there is a decoder inside. I can't find any instruction/info to reset the decoder so I can run on my M layout. Enclosed are the photos of the train and decoder. Would you please help. Appreciated   
|
|
|
|
Joined: 16/02/2004(UTC) Posts: 15,442 Location: DE-NW
|
Hi! Welcome to the forum!
Set all DIP switches to the OFF position for analogue operation. Switches 1 and 2 are now in the ON position. |
Regards Tom --- "In all of the gauges, we particularly emphasize a high level of quality, the best possible fidelity to the prototype, and absolute precision. You will see that in all of our products." (from Märklin New Items Brochure 2015, page 1) ROFLBTCUTS  |
|
|
|
Joined: 04/02/2011(UTC) Posts: 3,555 Location: Paris, France
|
Hi (a first name would be better) It looks like a Delta decoder and the 4 switches must be OFF to run in analogue mode. To know more I suggest you to read this https://www.marklin-users.net/ht...digital/DIdeltaaddr.htmlSince it is a forum (a group of friends) an introduction is welcome: - where you are - what scale you like - what are your projects - etc Far from being a police interrogation, it is rather a good way to start a conversation. Here a Märklin fan in digital HO, computer control from Paris area and former Engineer in electronics and systems having worked in France, USA, Canada, China, Taiwan, Germany. Cheers Jean |
|
|
|
|
Joined: 15/04/2024(UTC) Posts: 3 Location: California, Garden Grove
|
Switched 1 and 2 OFF, put on the track and see the light is ON but the train is idle. I guess the train may need some works on the motor since the seller told me that the train was in storage for years. Thanks soooooo much and appreciated.
Btw, I am from USA, retiree, just enter Marklin world, so far just start with Marklin MAC M track starter kit. Hope to learn more from everyone.
|
|
|
|
Joined: 16/02/2004(UTC) Posts: 15,442 Location: DE-NW
|
The hardened oil syndrome (HOS) can really lock up the motor and/or gears. A complete degreasing is the best treatment then. SR24 works better for me than iso-propyl alcohol. But there are other liquids you can try. Grease sparingly afterwards. |
Regards Tom --- "In all of the gauges, we particularly emphasize a high level of quality, the best possible fidelity to the prototype, and absolute precision. You will see that in all of our products." (from Märklin New Items Brochure 2015, page 1) ROFLBTCUTS  |
 1 user liked this useful post by H0
|
|
|
Joined: 15/04/2024(UTC) Posts: 3 Location: California, Garden Grove
|
Yup, I cleaned up the motor but all wheels & gears are lock up. Will search youtube video to learn how to disassemble completely and put it back together. Thank you for your advice and have a nice day.
|
 1 user liked this useful post by icf1vvn
|
|
|
Joined: 21/12/2012(UTC) Posts: 1,482 Location: Hrvatska
|
For burnt locomotives, I use a contact spray that quickly dissolves oil residues, sometimes the axles, gears and lubrication points need to be sprayed several times. Sometimes I have to open the engine and use pliers to pull out the rotor, which is baked on the shaft bearing. After everything becomes mobile, I drive the model for a while and then lubricate everything. Then it is good to drive it back and forth for half an hour so that it warms up and the oil reaches all the moving parts. Check out my workshop and those of others.
|
 2 users liked this useful post by 1borna
|
|
|
Joined: 10/02/2021(UTC) Posts: 3,882 Location: Michigan, Troy
|
Deoxit spray contact cleaner.
|
|
|
|
marklin-users.net community | Forum
»
General topics
»
H0-scale
»
Can't find decoder info to set up run on analog n layout.
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.