Updated 21.02.2014

Märklin 2870-1, SJ D 101

This is a variant of Märklin 3170

Märklin 3100-1, DRG E04 17, from the "750 Jahre Berlin" locomotive set

This is a variant of Märklin 3049

Märklin 3171, SJ D 109 with snow

Märklin 3366, DB 152 034-5

Märklin 34831, LAG 895

Märklin 37060, K.Bay.Sts.B. Ep 3/6 20102

Märklin 37320-1, SBB Re 6/6 11.687

Märklin 37510, SBB Ae 3/6^II 10426

Märklin 37512, SBB Ae 3/6^II 10421 and 10456

Märklin 37591, SBB Ae 8/14 11.801, double locomotive

Märklin 37754. NSB El 12 2113+2114

Märklin locomotive number	Motor		Decoder		Functions	Additional parts
	Originally fitted	Converted to	Originally fitted	Converted to/with
2870-1	sfcm 3*	dcm 5* 60923	Analogue	ESU mfx sound decoder	f0 = front light, change with direction f5 = internal light end 1 f6 = internal light end 2 f7 = flute, short f8 = flute, long f9 = driving sounds f10 = acc/brake delay cancel,         shunt speed on, brake sound off f11-f15= other sounds	ESU 62400 V3 M4 sound decoder,        with project file 63459 20mm square speaker from a 60933 set 2- 624510 bulb holder 5- 28Volt T1 light bulbs 3- bulb holders cut from a SIL connector some other small parts, see conversion report
3100-1	dcm 3*	dcm 5* 60901	Analogue	60901	f0 = front light, change with direction f1 = light driver end I f2 = light driver end II f4 = acc/brake delay cancel	258820 decoder holder bulb holder x2
3171	dcm 3*	dcm 5* 60903	Analogue	60903	f0 = front light, change with direction f1 = internal light f2 = light driver end 2 f4 = acc/brake delay cancel	258820 holder for decoder Modified bulb holders
3366	dcm 3*	60921	Analogue	60921 mfx	f0 = front light, change with direction f1 = light driver end 1 f2 = light driver end 2 f3 = shunt speed f4 = acc/brake delay cancel	2- 259 920 bulb holders 2- 610 080 bulbs 2- 2-pole SIL sockets as bulb extenders Home made LED interior light in both ends Home made distribution circuit board Home made spring seat for motor
34831	bell	no change	Delta	60902	f0 = front light, change with direction f1 = light driver end 1 f2 = light driver end 2 f4 = acc/brake delay cancel	258820 holder for decoder
37060	bell	no change	c91	no change	f0 = front light, change with direction f1 = smoke unit f4 = acc/brake delay cancel	Smoke unit
37320-1	dcm 5*	no change	mfx sound	no change	f0 = front light, change with direction 3+1 f1 = light off end I f2 = light off end II f3 = air compressor sound f4 = flute f5 = shunt speed f6 = acc/brake delay cancel
37510	dcm 5*	no change	simple c91	60922 mfx	f0 = front light, change with direction 3+1 f1 = interior light end I f2 = interior light end II f3 = shunt speed f4 = acc/brake delay cancel	456200 holder for decoder 28 Volt T1 bulbs for interior light, with 330 Ohm resistor
37512-1	dcm 5*	no change	simple c91	60922 mfx	f0 = front light, change with direction 3+1 f1 = interior light end I f2 = interior light end II f3 = shunt speed f4 = acc/brake delay cancel	456200 holder for decoder 28 Volt T1 bulbs for interior light, with 330 Ohm resistor
37512-2	dcm 5*	no change	simple c91	60922 mfx	f0 = front light, change with direction 3+1 f1 = interior light end I f2 = interior light end II f3 = shunt speed f4 = acc/brake delay cancel	456200 holder for decoder 28 Volt T1 bulbs for interior light, with 330 Ohm resistor
37591	dcm 5* x2	no change	c90	60960 added	f0 = front light, change with direction 3+1 f1 = light driver end I f2 = light driver end II f3 = light interior end I f4 = light interior end II	60960 function decoder added, for functions f1 - f4
37754	2x bell	no change	mfx sound	no change	f0 = front light, change with direction f2 = drive sounds f3 = flute long f4 = acc/brake delay cancel f5 = brake sound off f6 = release air pressure f7 = flute short f8 = shunt dpeed f9  = conductor's whistle	Original function setup may be changed later

Home   Page top