My three-axle (C and Co) Märklin diesel locomotives:
Updated 08.03.2014
Märklin 2846, CFL 455:
L = 10,6 cm.
This is a variant of Märklin 3136
Märklin 2847, SBB Em 3/3 OC3:
L = 11,2 cm.
This is a variant of Märklin 3088
Märklin 2848, CCB 215:
L = 10,6 cm.
This is version 8 of Märklin 3146
Märklin 28452, NS DH 360:
This is a variant of Märklin 3078
Märklin 28502, RCT 36 274:
This is a variant of Märklin 3146
Märklin 3065, DB 260 417-1:
Märklin 3136, CFL 453:
Märklin 3148 A, NSB Di 5.865, with dark roof and a home made brake car:
Märklin 3148 B+C, NSB Di 5.865, connected as double traction:
Märklin 3346, DB 236 405-7 and 406-5:
Märklin 34641, DB 365 709-5:
Swapped it's chassis and other parts with 3148 B
Märklin 37649, DB 360 159-8:
Swapped it's chassis and other parts with 3148 C
The conversions made to these models:
Märklin locomotive number |
Motor | Decoder | Functions | Additional parts/ remarks |
|||
---|---|---|---|---|---|---|---|
Originally fitted |
Converted to |
Originally fitted |
Converted to/with |
||||
2846 | dcm 3* | dcm 5* 60901 |
Analogue | 60901 60960 |
f0 = front light f1 = light driver f2 = rear light, cleaning car f3 = interior light, cleaning car f4 = acc/brake delay cancel |
258820 holder for decoder | |
2847 | lfcm 3* | dcm 5* 60923 |
Analogue | 60760 | f0 = front light change with direction f3 = interior light f4 = acc/brake delay cancel |
||
2848 | dcm 3* | dcm 5* 60901 |
Analogue | mini 60902 |
f0 = front light change with direction f4 = acc/brake delay cancel |
456200 holder for decoder | |
28452 | dcm 3* | dcm 5* 60760 |
Delta | 60760 | f0 = front light change with direction f3 = light driver (unofficial output) f4 = acc/brake delay cancel |
456200 holder for decoder LED interior light | |
28502 | dcm 3* | dcm 5* 60921 |
Analogue | 60921 mfx |
f0 = front light change with direction f1 = light connected car via relay f2 = light driver f3 = shunting speed f4 = acc/brake delay cancel |
456200 holder for decoder 28 Volt T1 bulbs with 330 ohm serial resistors for cabin light | |
3065 | sfcm 3* | no change | Analogue | 66031 Delta |
front light constantly on both ends function = Telex |
||
3136 | dcm 3* | not yet | Analogue | not yet | |||
3145 | dcm 3* | dcm 5* 60760 |
Analogue | 60760 | f0 = front light change with direction f3 = light driver (unofficial output) f4 = acc/brake delay cancel |
456200 holder for decoder Modified bulb holders for LEDs LED interior light | |
3148 | A | sfcm 3* | dcm 5* 60903 |
Analogue | ESU 61601 mfx |
f0 = front light change with direction f1 = telex end 1 f2 = telex end 2 f3 = telex brake car f4 = interior light f5 = shunting speed f6 = acc/brake delay cancel f7 = all exterior light f8 = f5 + f6 + f7 |
ESU 51968 amplifier board for decoder 2x 28 volt T1 bulbs 2x smd LED for interior light Runs normally with brake car 4665 |
B | sfcm 3* | dcm 5* 60901 |
Analogue | 60901 | f0 = front light change with direction f1 = Telex end 1 f2 = front light end1 f4 = acc/brake delay cancel |
2x 258820 holders for decoders 3148 B and C are permanently connected via a current conducting coupler. Only one pick-up shoe. 34641 and 37649 loco chassis are used to achieve close coupler between the locos. | |
C | sfcm 3* | dcm 5* 60901 |
Analogue | 60901 | f0 = front light change with direction f1 = Telex end 1 f2 = front light end1 f4 = acc/brake delay cancel | ||
3346 | 2x dcm 3* |
dcm 5* 60921 60760 |
Analogue | 60921 mfx1 |
f0 = front light change with direction f1 = interior light end 1 f2 = interior light end 2 f3 = shunting speed f4 = acc/brake delay cancel |
456200 decoder holder One decoder for both locomotives 28 Volt T1 bulbs with 330 ohm serial resistors for cabin light | |
34641 | dcm 3* | sfcm 3* | Delta | no change | front light constantly on both ends function = Telex |
Swapped chassis with 3148 B | |
37649 | dcm 5* | no motor | 60901 | no decoder | no functions | Swapped chassis with 3148 C Not operative |