My project was, to convert the analog marklin 3123 - "micheline" bus to digital controlled with mLd.
Also I decide to add interior light in the driver cab, and to change the interior lights of bulbs with 3mm yellow LED.
My first thought was to use the 60962 mLD for the conversion, but I found better idea to use the 60942 mLD, without the board of 21pin, because it is smaller from 60962.
For the driver cab, I choose to use a 2 x 1,3 mm SMD yellow LED.
All the cables that I use are 0,04 mm.
The Micheline
Marklin 3123-01 by
dgriman, on Flickr
The SMD LED, 2 x 1,3 mm, the Green box is 1cm x 1 cm
Marklin 3123-02 by
dgriman, on Flickr
The SMD LED soldered with the cables of 0,04mm
Marklin 3123-03 by
dgriman, on Flickr
Driver's cab
Marklin 3123-04 by
dgriman, on Flickr
The interior of the driver's cab
Marklin 3123-06 by
dgriman, on Flickr
The SMD LED in position, inside the Driver's cab
Marklin 3123-07 by
dgriman, on Flickr
The bus without the driver's cab
Marklin 3123-08 by
dgriman, on Flickr
The cable harness coming out of the driver's cab
Marklin 3123-09 by
dgriman, on Flickr
The light is switched on in the driver's cab
Marklin 3123-10 by
dgriman, on Flickr
Marklin 3123-10b by
dgriman, on Flickr
The light is switched off In the driver's cab.
Marklin 3123-10a by
dgriman, on Flickr
Interior look from top view
Marklin 3123-11 by
dgriman, on Flickr
The Micheline bus without the top
Marklin 3123-12 by
dgriman, on Flickr
The interior floor without the interior lights
Marklin 3123-13 by
dgriman, on Flickr
How the cables come from the driver's cab and they pass inside the floor plastic
Marklin 3123-14 by
dgriman, on Flickr
The analog situation inside of the car before the conversion
Marklin 3123-15 by
dgriman, on Flickr
Removing parts - the reverser
Marklin 3123-16 by
dgriman, on Flickr
Removing parts - the motor
Marklin 3123-17 by
dgriman, on Flickr
How well the new decoder fit inside the car
Marklin 3123-19 by
dgriman, on Flickr
The new mLD 60942 decoder on the 21 pin board
Marklin 3123-18 by
dgriman, on Flickr
Cabling of the new decoder
Marklin 3123-20 by
dgriman, on Flickr
Everything connected with the decoder
Marklin 3123-21 by
dgriman, on Flickr
3mm LED in position instead of plain bulb
Marklin 3123-22 by
dgriman, on Flickr
The new LEDs soldered
Marklin 3123-23 by
dgriman, on Flickr
Interior lights switched off
Marklin 3123-24 by
dgriman, on Flickr
Interior lights switched on
Marklin 3123-25 by
dgriman, on Flickr
The decoder ready inside the car
Marklin 3123-26 by
dgriman, on Flickr
The bus floor again in possition
Marklin 3123-27 by
dgriman, on Flickr
Interior lights in place - Finish
Marklin 3123-28 by
dgriman, on Flickr
The conversion of the 60942 to use it as 60962, I'll post it in a new topic.