 Joined: 05/07/2020(UTC) Posts: 326 Location: Mississippi, Vancleave
|
I am in the process of designing my layout using M track. Due to the angles involved with the different turnout configurations available, I layout using Autocad software set to 3 decimal places. At his setting, I find that there are gaps between tracks varying from less than 1/32" to well over 1/8". How much of a gap is permissible between track sections? How about angular alignment? Will M track accept a 1 or 2 degree misalignment?
|
|
|
|
|
|
 Joined: 04/02/2011(UTC) Posts: 3,562 Location: Paris, France
|
Hi Ron The M track is very tolerant toward angles (1° angle per track junction is recommended but you could go up to 2° or 3°). The distance between 2 junctions is to be kept to 1 or 2 mm per junction. The bigger the angle or the gap the less smooth will be the ride. In some case, using a piece or rail and a long rail joiner allows to fix a longer gap. Working with C track I started cutting some tracks when needed and it is very easy with a Dremel drill and a cutting disk) I am pretty sure the same is true with M track Below is an example with a 3 way switch (I don't recommend this on a M switch though)   Cheers Jean |
|
|
|
|
|
|
Joined: 05/07/2020(UTC) Posts: 326 Location: Mississippi, Vancleave
|
Originally Posted by: JohnjeanB  Hi Ron The M track is very tolerant toward angles (1° angle per track junction is recommended but you could go up to 2° or 3°). The distance between 2 junctions is to be kept to 1 or 2 mm per junction. The bigger the angle or the gap the less smooth will be the ride. In some case, using a piece or rail and a long rail joiner allows to fix a longer gap. Working with C track I started cutting some tracks when needed and it is very easy with a Dremel drill and a cutting disk) I am pretty sure the same is true with M track Below is an example with a 3 way switch (I don't recommend this on a M switch though) Cheers Jean Thank you Jean. I have modified some track sections to fit my home built transfer table and bridges. Being a former 2 rail modeler, I am aware of such mods. I didn't know Marklin intended for their track sections to be modified as they were originally intended for children.
|
|
|
|
|
|
Joined: 04/02/2011(UTC) Posts: 3,562 Location: Paris, France
|
Originally Posted by: Mr. Ron I didn't know Marklin intended for their track sections to be modified as they were originally intended for children. They did not but I found how easy it is to cut and assemble track pieces while still keeping the nice "clic" interface Cheers Jean |
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
