Troubles connecting a CS1 (60212) with a PC

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Troubles connecting a CS1 (60212) with a PC

Options

View

Previous Topic Next Topic

Rocca		#1 Posted : 15 October 2016 17:37:21(UTC) Retweet
Joined: 28/01/2004(UTC) Posts: 617		Dear Märklin Friends, I need your help. I tried today to connect my CS1 with my PC. I'm having now Windows 10 and so I suppose the troubles depending on that. I have too a router now (KRAUN Adsl). Anyway, when I check my settings for the IP address in the Tools I find the IPv4 address and then set it on the CS1 with the Gateway IPv4 address too. But when I restart my CS1, I can't see the Setup Page on my browser, The red light on the CS1 is red, as in the Instructions. Has had anyone the same trouble? Any suggestions, pelase? Best regards


User Profile View All Posts by User View Thanks


	Wish to join the discussion?! Login to your marklin-users.net community \| Forum account or Register a new forum account. Or Connect via Facebook

French_Fabrice		#2 Posted : 15 October 2016 19:00:20(UTC) Retweet
Joined: 16/05/2011(UTC) Posts: 1,476 Location: Lyon, France		Hi Stefano, You may have not compatible IP addresses between the PC /router and CS. Try to see here https://www.marklin-user...ps-and-tricks#post456312 and next post (#6) to see if the IPs are in the same subnet. An other tip: From your PC, open a dos/shell console and enter "ping <IP_address_of_the_cs>". If you get reply then it's ok. Cheers Fabrice

2 users liked this useful post by French_Fabrice		clapcott, Rocca
User Profile View All Posts by User View Thanks

Goofy		#3 Posted : 15 October 2016 19:00:51(UTC) Retweet
Joined: 12/08/2006(UTC) Posts: 9,019		Have you tried to connect network automatic with the router and the CS1? Maybe you did checked wrong by write numbers wrong?
		H0 DCC = Digital Command Control


User Profile View All Posts by User View Thanks

Rocca		#4 Posted : 16 October 2016 11:49:58(UTC) Retweet
Joined: 28/01/2004(UTC) Posts: 617		Hi Fabrice, Thank you so much for the help. I checked it again and now it works. I suppose I've been misunderstanding about the IP address to put on my CS1, but anyway the Instructions by Märklin are quite clear... I needed that for saving a backup of the system. It is like mcs_backup.mcs ? Am I right? Best regards and thank you again Stefano Originally Posted by: French_Fabrice Hi Stefano, You may have not compatible IP addresses between the PC /router and CS. Try to see here https://www.marklin-user...ps-and-tricks#post456312 and next post (#6) to see if the IPs are in the same subnet. An other tip: From your PC, open a dos/shell console and enter "ping <IP_address_of_the_cs>". If you get reply then it's ok. Cheers Fabrice


User Profile View All Posts by User View Thanks

Rocca		#5 Posted : 16 October 2016 11:51:53(UTC) Retweet
Joined: 28/01/2004(UTC) Posts: 617		Hi Goofy, I tried that too, yess, but I haven't a DHCP Server in my pc...!! Good Sunday to you Stefano Originally Posted by: Goofy Have you tried to connect network automatic with the router and the CS1? Maybe you did checked wrong by write numbers wrong?


User Profile View All Posts by User View Thanks

Minok		#6 Posted : 17 October 2016 21:32:40(UTC) Retweet
Joined: 15/10/2006(UTC) Posts: 2,311 Location: Washington, Pacific Northwest		Originally Posted by: Rocca Hi Goofy, I tried that too, yess, but I haven't a DHCP Server in my pc...!! Good Sunday to you Stefano Originally Posted by: Goofy Have you tried to connect network automatic with the router and the CS1? Maybe you did checked wrong by write numbers wrong? Routers typically have DHCP servers built in, to facilitate the NAT system one typically uses in a home network. Quote: "router now (KRAUN Adsl)"
		Toys of tin and wood rule! --- My Layout Thread on marklin-users.net: InterCity 1-3-4 My YouTube Channel: https://youtube.com/@intercity134


User Profile View All Posts by User View Thanks

Rocca		#7 Posted : 19 October 2016 23:01:00(UTC) Retweet
Joined: 28/01/2004(UTC) Posts: 617		Hi, Minok, If I look at the properties of my Internet connection it tells that the DHCP is not available. Best regards Stefano Originally Posted by: Minok Originally Posted by: Rocca Hi Goofy, I tried that too, yess, but I haven't a DHCP Server in my pc...!! Good Sunday to you Stefano Routers typically have DHCP servers built in, to facilitate the NAT system one typically uses in a home network. Quote: "router now (KRAUN Adsl)"


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.