Joined: 15/12/2003(UTC)
Posts: 655
Location: Buenos Aires,
|
Hi all,
Does anybody know any way for connecting a SUSI device (a sound module in this case) to a Lokpilot V4.0 M4 with 21MTC interface?
The Lokprogrammer shows an option to enable SUSI, but I couldn't find any information about how to connect the module to the decoder.
Any help will be welcome.
Thanks in advance.
Jorge Vilarrubi, Buenos Aires, Argentina |
Jorge Vilarrubí
Buenos Aires
ARGENTINA |
|
|
|
|
|
Joined: 16/02/2004(UTC)
Posts: 15,446
Location: DE-NW
|
Hi!
Some locos have a SUSI socket on the loco board.
Otherwise you can always cut off the plug and solder the connections. |
Regards Tom --- "In all of the gauges, we particularly emphasize a high level of quality, the best possible fidelity to the prototype, and absolute precision. You will see that in all of our products." (from Märklin New Items Brochure 2015, page 1) ROFLBTCUTS  |
|
|
|
|
|
Joined: 15/12/2003(UTC)
Posts: 655
Location: Buenos Aires,
|
Hi Tom, thanks for your reply.
My question is related to a Decoder-to-SUSI connection.
SUSI standards establish both a protocol and a wiring scheme.
Pin1 - black - Ground
Pin2 - gray - Data
Pin3 - blue - Clock
Pin4 - red - Power (Unregulated + track voltage)
Whay I need to know is to what pins of the 21MTC I have to connect the four SUSI wires.
Soldering the wires to the decoder is not a problem.
Regards,
Jorge. |
Jorge Vilarrubí
Buenos Aires
ARGENTINA |
|
|
|
|
|
 Joined: 09/04/2012(UTC) Posts: 1,343 Location: Southwest Ohio
|
|
Matt
Era 3
DB lokos, coaches and freight cars from across Europe
But I do have the obligatory (six) SBB Krocs
ECoS 50200, all FX and MFX decoders replaced with ESU V4s, operated in DCC-RailCom+ with ABC brake control.
With the exception of the passenger wagens with Marklin current conducting couplers, all close couplers have been replaced with Roco 40397. |
|
|
|
|
|
Joined: 15/12/2003(UTC)
Posts: 655
Location: Buenos Aires,
|
Hi Matt,
I belive I've found the solution.
21MTC has four pins that should provide both voltage and info to the SUSI sound module.
16 - V+
20 - GND
5 - clock
6 - data
Will try that and see what happens.
Regards,
Jorge. |
Jorge Vilarrubí
Buenos Aires
ARGENTINA |
 1 user liked this useful post by jorge_vilarrubi
|
|
|
|
Joined: 15/12/2003(UTC)
Posts: 655
Location: Buenos Aires,
|
Hi Matt et al, my solution has worked.
CV124 must be set accordingly.
Best regards,
Jorge
|
Jorge Vilarrubí
Buenos Aires
ARGENTINA |
1 user liked this useful post by jorge_vilarrubi
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
