Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.



2 Pages<12
Go to last post in this topic Go to first unread post in this topic
Offline hennebror  
#51 Posted : 28 February 2021 16:02:25(UTC)

United States   
Joined: 27/01/2021(UTC)
Posts: 17
Location: Wilmington, DE
Per, thanks for the info and doing the test. Mine has nowhere near that power. I’ve been using an mrc large scale power pack to test. That shouldn’t be the issue. The magnets are all oriented correctly as well. I also tried to use one of the esu conversions but it’s the same result. At least we’re narrowing it down!

I reassembled it this morning for another test with the same result. It requires almost no force to stop. And often needs a little twist to get going again.

IMG_0994.MOV (5,016kb) downloaded 7 time(s).
thanks 1 user liked this useful post by hennebror
Offline Purellum  
#52 Posted : 28 February 2021 16:43:31(UTC)

Joined: 08/11/2005(UTC)
Posts: 3,303
Location: Mullerup, 4200 Slagelse

Originally Posted by: hennebror Go to Quoted Post
It requires almost no force to stop.

If I tried stopping mine the way you do at 6,9V; I would end up with at big hole in my finger, and the motor would still be running BigGrin



If you can dream it, you can do it!

I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

Users browsing this topic
OceanSpiders 2.0
2 Pages<12
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2021, Yet Another Forum.NET
This page was generated in 0.296 seconds.