Hi all,

I wonder whether someone has the solution to my question :

I have recently installed 60945 mSD decoders (Marklin Sound Decoder for Steam Locos) into some of my steam locomotives. The mSD decoder has 15 functions.

I have a Marklin 6021 controller. The 6021 has 4 function buttons plus the Lights function.

I have read that you can set the CV Addresses for CV 50 and 49 to turn off the mfx and DCC protocols, and then you can have 4 consecutive addresses on the loco, so that the 6021 can access all 15 of the available functions, providing you with the full range of sound and other functions.

However, the 6021 seems to ignore the CV settings, and reverts back to what it thinks is best, actually with one main address and one consecutive address, providing me with 8 functions only.

Has anybody managed to set the CV addresses in order to use all available functions from a 6021 controller using 4 consecutive addresses ?
I would be grateful if you could tell me what you have programmed for CV Addresses 50 and 49 ?

For info, I am using a CS1 with programming track to program the CV Addresses, then put the loco back on the layout which uses the 6021 controller.

Regards,
John

Tom,

Thanks for a swift reply to my question !
I am sure that is the correct answer.
I shall let you know when I have had a chance to try it out

Regards,
John