Digital 3674 talking to 67025 controller

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Digital 3674 talking to 67025 controller - Problem with loco 3674 working with 67025 controller

Options

View

Previous Topic Next Topic

bob1265		#1 Posted : 18 February 2013 15:08:18(UTC) Retweet
Joined: 14/02/2013(UTC) Posts: 4 Location: melbourne		Hi Team I'm very new to this - my father-in-law gave my 7yr old son a Marklin starter set for christmas 2010 and up until now it's been plain sailing! We recently acquired a Digital loco 3674 (his order was it had to look the same at each end!!) but cannot get it to work with the current set up. The lights come on, but no movement. Can this loco work with this controller? I've found out about the coding switches that are inside but don't know if they are set incorrectly for this setup and what they should be set to. He has 3 locos that work on setting 1,2 & 4. Any help would be hugely appreciated. Cheers Bob


User Profile View All Posts by User View Thanks


	Wish to join the discussion?! Login to your marklin-users.net community \| Forum account or Register a new forum account. Or Connect via Facebook

GSRR		#2 Posted : 18 February 2013 16:16:30(UTC) Retweet
Joined: 01/03/2009(UTC) Posts: 1,339 Location: USA		Hello Bob. Welcome to the forum. Do you have the manual booklet that came with both this new lok and the controller? The controller has 4 presets available. As # 3 is the only one not taken you need to change the address on the lok. There is a screw at the top of the body or shell, remove that, then remove the body. Find the dip switches, some describe as a piano keyboard. You need to set the address to 60. That would be. 1 n n n 5 n n n r/Thomas
		ETE ECoS iTrain TouchCab C-Gleis German Era Id & IIIb USA Era IIIb SBB Era III SJ Era IV GC Era V

1 user liked this useful post by GSRR		H0
User Profile View All Posts by User View Thanks

GSRR		#3 Posted : 19 February 2013 05:19:50(UTC) Retweet
Joined: 01/03/2009(UTC) Posts: 1,339 Location: USA		Bob, Another consideration to think of. The model you mention was last produced 20 years ago. http://www.bahn.hfkern.d...erklin/Dt_Loks_V216.html If it has been a few years since this lok ran, it maybe in need of service. After you change the dip switches, leave the body off, and place the chassis on the track. Look to see if the motor or gears are binding when you add throttle. The lok should also be clean of dust balls and lint. If it needs a clean and service use the search function on this site, lot's of good info here. r/Thomas
		ETE ECoS iTrain TouchCab C-Gleis German Era Id & IIIb USA Era IIIb SBB Era III SJ Era IV GC Era V


User Profile View All Posts by User View Thanks

bob1265		#4 Posted : 19 February 2013 14:22:06(UTC) Retweet
Joined: 14/02/2013(UTC) Posts: 4 Location: melbourne		Originally Posted by: GSRR Hello Bob. Welcome to the forum. Do you have the manual booklet that came with both this new lok and the controller? The controller has 4 presets available. As # 3 is the only one not taken you need to change the address on the lok. There is a screw at the top of the body or shell, remove that, then remove the body. Find the dip switches, some describe as a piano keyboard. You need to set the address to 60. That would be. 1 n n n 5 n n n r/Thomas Hi Thomas Thanks for this. Initially I thought my chances of finding the manual would be poor at best, but I had success. A bigger success was a manual that is actually useful once you've set it up (thumbs up to Marklin!) The presets are 78,72,60,24 When my son isn't around I'll give it a test run, and also looking at the servicing point you raised - thanks for that as well. I'll let you know how I go in the next day or two. Really appreciate your very speedy assistance Cheers Bob


User Profile View All Posts by User View Thanks

bob1265		#5 Posted : 21 February 2013 14:03:39(UTC) Retweet
Joined: 14/02/2013(UTC) Posts: 4 Location: melbourne		Originally Posted by: GSRR Hello Bob. Welcome to the forum. Do you have the manual booklet that came with both this new lok and the controller? The controller has 4 presets available. As # 3 is the only one not taken you need to change the address on the lok. There is a screw at the top of the body or shell, remove that, then remove the body. Find the dip switches, some describe as a piano keyboard. You need to set the address to 60. That would be. 1 n n n 5 n n n r/Thomas Hi Thomas I made the changes and gave it a secret test run last night. All good - we have movement !! Many thanks for your help. Cheers Bob.. a very happy new forum member!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.