You have to program the decoders to different addresses. At the moment I don't yet know how to do that. I got my MS2 last week, and I have no accessory decoders on my layout yet.

Is the information not contained in the leaflet that comes with the 74460 decoders?

Edit: -

You need to set the address with the coding switches on the decoder. See the manual here:

http://medienpdb.maerkli.../1/pdf/74460_betrieb.pdf

Copy the URL into the search field on your browser. It won't work if you just click on the link.

Download with yours pdf doesn´t work.

Goofy,

If you have the new 74445 decoders attached there are no dip switches to change, as far as I remember you need to add the turnouts one at a time, each time assigning the preferred address on the MS2 by switching between red and green once or twice until the turnout accepts the address assigned to it by the MS2.

I am not sure however how to reset them once they have an address assigned like in your case.

Regards

Leon

So I recently added some C track to run independently with my established M track. I wanted to add two pairs of turnouts so I could switch between the two C track. I had to add decoders to one pair. Information here and ajckids utube videos most helpful. However when it got to pairing with my mobile station, absolutely nothing in the manuals or hereon how to get it to work. I thought it was like a locomotive and you had to pair it up. After hours scratching my head, I am indebted to Nicolas Boutinon who reminded me to check that the MS auxiliary was set to MM!it wasn’t by default and changing it worked! I know many familiar with digital would know this, but starting out it isn’t that simple!
I agree that there is no way you could easily control multiple auxiliaries with a MS and the old switch boxes that I use with my M track is the way to go.
Hope this helps a newbie like myself to digital?