7190 ENDGLEIS

Welcome Guest! To enable all features please Login or Register.

Notification

Error

7190 ENDGLEIS - 7190 ENDGLEIS

Options

View

Previous Topic Next Topic

Kristaki		#1 Posted : 27 October 2025 10:44:12(UTC) Retweet
Joined: 01/10/2025(UTC) Posts: 51 Location: Valais, Sierre		i have also another issue... the 7190 with a light on the M track i have it connected to the c and m convert gleis to be on the layout connected.. I did this connection i connect the 7190 yellow cable on the 6611 transfo and the 6611 transfo is connected to the layout but the bulb dont light up... i wonder what i did wrong here has B and O is connected also to the 6611 transfo has a test even on a text m with B and 0 and hte 7190 dont light up i tried with few ones.. no result i doubt they all dead the bulbs or on the C and M track to actual digital layout and with the 7190 connected also dont work is the 7190 not enable to work on a Digital? i wonder has even has told babove with a M 4 rails and the 7190 and all this connected to thge 6611 not owrking anyone has a clue here for me maybe ty

2 users liked this useful post by Kristaki		Jimmy Thompson, marklinist5999
User Profile View All Posts by User View Thanks


	Wish to join the discussion?! Login to your marklin-users.net community \| Forum account or Register a new forum account. Or Connect via Facebook

marklinist5999		#2 Posted : 27 October 2025 11:31:44(UTC) Retweet
Joined: 10/02/2021(UTC) Posts: 4,053 Location: Michigan, Troy		Try only connecting it to M tracks and not the C to M transition track because the terminals are different and confusing. Does it light up with the wires connected to only your 6611 trafo and no track? My old analog signal works on my digital layout. It's just a light bulb and a solenoid. The store should be able to help you with this and more because you are a beginner. My first dealer did. He was from Germany. Later on, if you have any old analog M track turnouts, you can get M 83 decoder which is mfx and connect to the track for power and digital from the MS 2. You could then program the M 83 decoder in MS 2 to operate turnouts and signal 🚦


User Profile View All Posts by User View Thanks

Kristaki		#3 Posted : 27 October 2025 12:50:35(UTC) Retweet
Joined: 01/10/2025(UTC) Posts: 51 Location: Valais, Sierre		Works with power locgoes only with m track but this bulb dont light up

1 user liked this useful post by Kristaki		marklinist5999
User Profile View All Posts by User View Thanks

marklinist5999		#4 Posted : 27 October 2025 14:50:34(UTC) Retweet
Joined: 10/02/2021(UTC) Posts: 4,053 Location: Michigan, Troy		Bad bulb perhaps then? That's why I asked you if you tried just the yellow bulb wire and brown ground wire to the transformer.


User Profile View All Posts by User View Thanks

Kristaki		#5 Posted : 27 October 2025 14:56:00(UTC) Retweet
Joined: 01/10/2025(UTC) Posts: 51 Location: Valais, Sierre		OH YEAH IS FIXED WAS THE I HTINK TO SCRATCH A BIT THE COPPER NOW WORKS THE CONECTIONS WERE FINE I WILL USE THESE 8 ON THE TRASNBORDER 7294 I HAVE TO VERIFY THIS ONE ALSO THEN BE FINE:)

1 user liked this useful post by Kristaki		marklinist5999
User Profile View All Posts by User View Thanks

Kristaki		#6 Posted : 27 October 2025 15:33:37(UTC) Retweet
Joined: 01/10/2025(UTC) Posts: 51 Location: Valais, Sierre		ALL WAS IN BOXES SINCE 45 YEARS SO IMAGINE.. BUT WAS GOOD TAKEN CARE

1 user liked this useful post by Kristaki		marklinist5999
User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.