marklin 37255 issue not wokirng

Welcome Guest! To enable all features please Login or Register.

Notification

Error

marklin 37255 issue not wokirng - marklin 37255 issue not wokirng

Options

View

Previous Topic Next Topic

Adrian666		#1 Posted : 12 October 2025 17:02:08(UTC) Retweet
Joined: 06/01/2025(UTC) Posts: 58 Location: Ilfov, Voluntari		Hi guys, Please assist with this problem: I cannot start this locomotive, was able to read it with CSS3 but the loco doesn't run, no lights, but the wheels are moving. I attached a video! I also tested another loco and it works, wanna rule out any issues with the track. This was an online order,I don't want to open the loco as I will return it if it doesn't move. Let me know if I'm doing anything wrong


User Profile View All Posts by User View Thanks


	Wish to join the discussion?! Login to your marklin-users.net community \| Forum account or Register a new forum account. Or Connect via Facebook

rhfil		#2 Posted : 12 October 2025 22:40:06(UTC) Retweet
Joined: 05/09/2014(UTC) Posts: 753 Location: NEW HAMPSHIRE, Somersworth		Apparently it is a fx decoder so should have a MM address. Edited by moderator 16 October 2025 00:49:59(UTC) \| Reason: Deleted unnecessary comment

1 user liked this useful post by rhfil		David Dewar
User Profile View All Posts by User View Thanks

Chris6382chris		#3 Posted : 12 October 2025 23:12:19(UTC) Retweet
Joined: 27/11/2009(UTC) Posts: 1,225 Location: Middle of the US		Originally Posted by: rhfil Apparently it is a fx decoder so should have a MM address. That is what this is forum is for. People ask questions and people offer suggestions and solutions. As a result, people "learn how to use the equipment". Edited by moderator 16 October 2025 00:50:49(UTC) \| Reason: Removed unneccary comment from within the quote.

3 users liked this useful post by Chris6382chris		dickinsonj, DB Fan, marklinist5999
User Profile View All Posts by User View Thanks

Adrian666		#4 Posted : 12 October 2025 23:25:01(UTC) Retweet
Joined: 06/01/2025(UTC) Posts: 58 Location: Ilfov, Voluntari		Hi, Thanks for replay. I also tested on MM.... That wasnt the issue Long story short , the loco has a lever to change how it gets electricity I managed to make it work. But wasnt due to lack of equipment knowledge. Thanks

2 users liked this useful post by Adrian666		seatrains, marklinist5999
User Profile View All Posts by User View Thanks

Chris6382chris		#5 Posted : 13 October 2025 03:20:03(UTC) Retweet
Joined: 27/11/2009(UTC) Posts: 1,225 Location: Middle of the US		Congratulations on getting the engine running. I did see the level under the locomotive, assuming that was to switch it from getting track power to overhead catenary power? Again, congratulations.

2 users liked this useful post by Chris6382chris		seatrains, marklinist5999
User Profile View All Posts by User View Thanks

rhfil		#6 Posted : 13 October 2025 03:59:53(UTC) Retweet
Joined: 05/09/2014(UTC) Posts: 753 Location: NEW HAMPSHIRE, Somersworth		The lever is part of the loco and the loco is an equipment. Did the loco come with a manual? Your video shows you registering a loco and reading the address of a dcc decoder. Analog is much simpler.


User Profile View All Posts by User View Thanks

Adrian666		#7 Posted : 15 October 2025 07:17:32(UTC) Retweet
Joined: 06/01/2025(UTC) Posts: 58 Location: Ilfov, Voluntari		Originally Posted by: Chris6382chris Congratulations on getting the engine running. I did see the level under the locomotive, assuming that was to switch it from getting track power to overhead catenary power? Again, congratulations. thank you! the lever was a switch between track power and catenary. This was absolutely new to me!

1 user liked this useful post by Adrian666		marklinist5999
User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.