marklin-users.net community | Forum

 
Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Mobile Station 60657 stuck in STOP mode
Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Previous Topic Next Topic
Offline dhyan  
#1 Posted : 25 November 2018 07:19:38(UTC)
Retweet
dhyan

Netherlands   
Joined: 19/05/2012(UTC)
Posts: 15
Location: The Hague
I purchased a new mobile station 60657 and used it for five or six times without any problems. Today I wanted to use it again but it is stuck in STOP mode and I am unable to get it out of this stop mode.

Any ideas?

Warm regards

Dhyan
Back to top

Wish to join the discussion?! Login to your marklin-users.net community | Forum accountor Register a new forum account. Or Connect via Facebook  
Back to top  
Offline MaerklinLife  
#2 Posted : 25 November 2018 09:01:21(UTC)
Retweet
MaerklinLife


Joined: 03/02/2016(UTC)
Posts: 490
If it is not in stop mode because of a short on your layout, and if it is brand new: Back to the dealer.
Back to top
Offline RayF  
#3 Posted : 25 November 2018 10:32:37(UTC)
Retweet
RayF

Gibraltar   
Joined: 14/03/2005(UTC)
Posts: 15,874
Location: Gibraltar, Europe
Disconnect the box from the layout and see if it's still stuck in Stop mode. If it's OK then you have a short circuit on your layout.
Ray
Mostly Marklin.Selection of different eras and European railways
Small C track layout, control by MS2, 100+ trains but run 4-5 at a time.
Back to top
Offline LAMBERT Philippe  
#4 Posted : 03 October 2025 14:14:48(UTC)
Retweet
LAMBERT Philippe

France   
Joined: 03/10/2025(UTC)
Posts: 6
Location: provence cote d'azur
Bonjour,
Malheureusement je n'ai pas la réponse, mais par contre j'ai le même problème avec ma station le bouton stop reste bloqué au rouge.
J'ai lu les conseils précédent et j'ai déconnecter du réseau et le voyant stop reste toujours allumé.
Pouvez-vous m'aider svp.
Merci d'avance
Philippe
Back to top
Offline LAMBERT Philippe  
#5 Posted : 03 October 2025 14:49:44(UTC)
Retweet
LAMBERT Philippe

France   
Joined: 03/10/2025(UTC)
Posts: 6
Location: provence cote d'azur
Hello,
Unfortunately, I don't have the answer, but I'm having the same problem with my station: the stop button remains stuck in red.
I read the previous advice and disconnected from the network, and the stop light still remains on.
It would be helpful if you could help me, please.
Thanks in advance.
Philippe
Back to top
Offline LAMBERT Philippe  
#6 Posted : 03 October 2025 14:50:45(UTC)
Retweet
LAMBERT Philippe

France   
Joined: 03/10/2025(UTC)
Posts: 6
Location: provence cote d'azur
Désolé j'ai fait une erreur,

Hello,
Unfortunately, I don't have the answer, but I'm having the same problem with my station: the stop button remains stuck in red.
I read the previous advice and disconnected from the network, and the stop light still remains on.
It would be helpful if you could help me, please.
Thanks in advance.
Philippe
Back to top
thanks 1 user liked this useful post by LAMBERT Philippe
Offline LAMBERT Philippe  
#7 Posted : 03 October 2025 14:51:51(UTC)
Retweet
LAMBERT Philippe

France   
Joined: 03/10/2025(UTC)
Posts: 6
Location: provence cote d'azur
Bon il ne veux pas le mettre en anglais
Désolé
Philippe
Back to top
Offline mike c  
#8 Posted : 03 October 2025 19:01:37(UTC)
Retweet
mike c

Canada   
Joined: 28/11/2007(UTC)
Posts: 8,287
Location: Montreal, QC
Originally Posted by: LAMBERT Philippe Go to Quoted Post
Bon il ne veux pas le mettre en anglais
Désolé
Philippe


Si l'appareil est bloquée en "Stop" meme quand l'appareil n'est pas branché au rails, il est possible que l'appareil est cuit.
Essayez de faire un "reset" (voir p. 68)

Reset 68.pdf (38kb) downloaded 2 time(s).

Debrancher la MS. Laissez sans alimentation (15-20 sec). Connectez la MS a une section de rail droit de 360mm (séparé du réseau).
Branchez la MS. Voir si elle demeure en mode "Stop"

Si vous avez toujours des problèmes, rentrez en contact avec Maerklin a service(at)maerklin.de ou a digital(at)marklin.com (USA - Anglais)

Salutations

Mike C
Back to top
Offline mike c  
#9 Posted : 03 October 2025 19:09:28(UTC)
Retweet
mike c

Canada   
Joined: 28/11/2007(UTC)
Posts: 8,287
Location: Montreal, QC
Originally Posted by: dhyan Go to Quoted Post
I purchased a new mobile station 60657 and used it for five or six times without any problems. Today I wanted to use it again but it is stuck in STOP mode and I am unable to get it out of this stop mode.

Any ideas?

Warm regards

Dhyan


Disconnect the MS from the power supply for a minute or two. Connect the MS to a short track section (one or two segments) not part of the layout
Plug MS back in and see whether the "stop" remains active.
Hopefully it will resume working

If not, try a reset (Page 43-44 of the manual)
Reset 43.pdf (62kb) downloaded 4 time(s).

If it still does not work, send an email to digital(at)marklin.com and see if Rick and team can assist.

Regards

Mike C
Back to top
thanks 1 user liked this useful post by mike c
Offline LAMBERT Philippe  
#10 Posted : 03 October 2025 20:13:20(UTC)
Retweet
LAMBERT Philippe

France   
Joined: 03/10/2025(UTC)
Posts: 6
Location: provence cote d'azur
Bonsoir et merci pour vos réponses/
Problèmes résolu J'avais une broche du câble de la station qui était tordu,
je l'ai redresser et tout fonctionne à nouveau.
Merci
Philippe
Back to top
thanks 2 users liked this useful post by LAMBERT Philippe
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET
This page was generated in 0.350 seconds.