 Joined: 06/01/2025(UTC) Posts: 18 Location: Delhi
|
Hi everyone. Im Sanjiv from India and have the following problem configuring S88. I have already a Link 88 connected to the CS3 Plus and all contacts working fine. I recently connected a S88 directly to the RJ45 port at the bottom of the CS3Plus and added 4 contacts under GFP3-1. Unfortunately none are working in fact not responding at all. How can we configure this. Can some one please help ion this issue. Am attaching some photos     thanks Sanjiv
|
|
|
|
|
|
 Joined: 04/02/2021(UTC) Posts: 480 Location: USA
|
Try connecting s88 to l88 with supplied cable. (L88 needs power supply to work.)
Ben |
|
 1 user liked this useful post by BenP
|
|
|
|
 Joined: 19/05/2014(UTC) Posts: 64 Location: Sjælland, Kirke-Hyllinge
|
Hi,
you will need to connect the ground pin on the S88 AC (invertet T) to the brown wire to the tracks for the first S88 AC connected to the Rj45 connector at the bottom of the CS3+.
Your configuration looks good.
Best regards
Per
|
1 user liked this useful post by PerR
|
|
|
|
 Joined: 04/02/2011(UTC) Posts: 3,555 Location: Paris, France
|
Hi Sanjiv I think the issue is related with updating bus lengths on LinkS88 You have one external 60883 that you seem to have programmed correctly What about the INTERNAL LinkS88 included in the CS3Plus 60216? Have you updated the number of S88 modules connected DIRECTLY to the CS3 Plus? Check in the LinkS88 tab Sorry, I cannot be more precise as I have a CS3 60226 with an external LinkS88 It seems to show on one of your screen the number of S88 modules connected directly to the CS3Plus See the red-circled zone  You MUST also connect the upsidedown "T" of the directly connected S88 to the "O" of the digital power output Cheers Jean |
|
1 user liked this useful post by JohnjeanB
|
|
|
|
Joined: 06/01/2025(UTC) Posts: 18 Location: Delhi
|
Originally Posted by: BenP  Try connecting s88 to l88 with supplied cable. (L88 needs power supply to work.)
Ben Hi I tried that but still no response. Perhaps I cannot figure out what should the settings be. Any advise on settings Sanjiv
|
|
|
|
|
|
Joined: 06/01/2025(UTC) Posts: 18 Location: Delhi
|
Originally Posted by: JohnjeanB Hi Sanjiv I think the issue is related with updating bus lengths on LinkS88 You have one external 60883 that you seem to have programmed correctly What about the INTERNAL LinkS88 included in the CS3Plus 60216? Have you updated the number of S88 modules connected DIRECTLY to the CS3 Plus? Check in the LinkS88 tab Sorry, I cannot be more precise as I have a CS3 60226 with an external LinkS88 It seems to show on one of your screen the number of S88 modules connected directly to the CS3Plus See the red-circled zone You MUST also connect the upsidedown "T" of the directly connected S88 to the "O" of the digital power output Cheers Jean Hi Jean, yes I have one S88 AC connected to the internal Link included in the CS3plus 60216. The no of modules connected to the CS3 Plus is at 1. What should the configuration be, I cannot figure out. Sanjiv Keshava
|
|
|
|
|
|
Joined: 06/01/2025(UTC) Posts: 18 Location: Delhi
|
Originally Posted by: PerR Hi,
you will need to connect the ground pin on the S88 AC (invertet T) to the brown wire to the tracks for the first S88 AC connected to the Rj45 connector at the bottom of the CS3+.
Your configuration looks good.
Best regards
Per I have done just that. Connected the inverted T on the s88 to the track 'O' But still I get no response. I can't seem to get the right configuration Sanjiv
|
|
|
|
|
|
Joined: 06/01/2025(UTC) Posts: 18 Location: Delhi
|
Hi all, Thanks for your responses. I finally figured I had a defective S88. Got a new one and all working perfectly well
Sanjiv
|
|
|
|
|
|
Joined: 12/08/2006(UTC)
Posts: 9,273
|
Originally Posted by: sanjiv Hi all, Thanks for your responses. I finally figured I had a defective S88. Got a new one and all working perfectly well
Sanjiv Did you find out what the defective S88 was the problem? You can open the box and tried to figure out if there was bad contacts for example. |
H0
DCC = Digital Command Control
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
