 Joined: 06/01/2025(UTC) Posts: 44 Location: Ilfov, Voluntari
|
    i just bought this recently, the middle part îs damaged , îs this expensive to fix ? I'm pretty new to this and have no idea . Thanks, Adrian
|
 1 user liked this useful post by Adrian666
|
|
|
|
 Joined: 11/06/2007(UTC) Posts: 209 Location: Eslöv, Sweden
|
This pickup shoe is suppost to be snapped in. Check carefully and you should be able to put it back in place.
Peder
|
1 user liked this useful post by pederbc
|
|
|
|
 Joined: 28/01/2024(UTC) Posts: 60 Location: Nordrhein-Westfalen, Aachen
|
If it doesn't snap in, try a droplet of (super-) glue. The pictures are not too sharp, but the slider / pickup shoe looks pretty unworn if not new, so it would be worthwhile to try to reuse. Make sure there is continuity for the current contact! Edited by user 14 January 2025 21:50:45(UTC)
| Reason: Not specified |
Regards,
Rüdiger (Rudi)
|
1 user liked this useful post by RudiC
|
|
|
|
Joined: 06/01/2025(UTC) Posts: 44 Location: Ilfov, Voluntari
|
|
|
|
|
|
|
 Joined: 28/11/2007(UTC) Posts: 8,233 Location: Montreal, QC
|
The slider is part E103264. It comes in a bag of 4 for EUR 25. There is one on eBay (2 sliders): https://www.ebay.com/itm/292721417128?You may be able to repair your's by removing the base plate (see the eBay listing for a photo) and clipping the metal clips back around it Regards Mike C
|
2 users liked this useful post by mike c
|
|
|
|
 Joined: 27/02/2008(UTC) Posts: 297 Location: Santiago
|
Hello Adrian, Please refer to the page 29 of the instruction manual. There you can see how the slider is extracted and how it should go. No need to buy expensive part. By the photos it is just bent and you can fix the problem with a clamp or even with your fingers. If you are missing the instruction manual you can find it here. https://www.maerklin.de/en/products/details/article/39978#Hope this fix the problem. Kr, Eduardo
|
|
|
|
|
|
Joined: 06/01/2025(UTC) Posts: 44 Location: Ilfov, Voluntari
|
Originally Posted by: eduard71  Hello Adrian, Please refer to the page 29 of the instruction manual. There you can see how the slider is extracted and how it should go. No need to buy expensive part. By the photos it is just bent and you can fix the problem with a clamp or even with your fingers. If you are missing the instruction manual you can find it here. https://www.maerklin.de/en/products/details/article/39978#Hope this fix the problem. Kr, Eduardo Thank You Eduardo , its v helpful. The loco even runs broken like IT îs right now. I will attempt to fix IT anyway
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
