marklin-users.net community | Forum
»
General topics
»
General MRR
»
Problems with installing the main signal(76493) into Mobile station
 Joined: 30/09/2024(UTC) Posts: 4 Location: Helsinki
|
Could somebody advice how to install the main signal(76493) into the Mobile station correctly by using the signal decoder of the signal. I have tried that but the signal just shows all of its tree aspects(hp0, hp1 and hp2) at the same time even though the relay of the signal decoder ”clicks” when I press the red/green buttons of the Mobile station. I have used DIP switches to program the signal and set the address to 27 according to the Märklin manual. I switched DIP switches 1, 2, 4, and 5 to the 'on' position. What could be the reason for this kind of problem?
|
 1 user liked this useful post by Valentin
|
|
|
|
 Joined: 10/02/2021(UTC) Posts: 3,887 Location: Michigan, Troy
|
The dip switches override mfx I think. Watch the Model train fun guy program it on YouTube. I have a CS 3, so it's a little different from the MS 2. I think after he set the switches in dcc he changed the protocol back to mfx, but it's been too long to recall.
|
2 users liked this useful post by marklinist5999
|
|
|
|
Joined: 12/08/2006(UTC)
Posts: 9,273
|
Originally Posted by: Valentin  Could somebody advice how to install the main signal(76493) into the Mobile station correctly by using the signal decoder of the signal. I have tried that but the signal just shows all of its tree aspects(hp0, hp1 and hp2) at the same time even though the relay of the signal decoder ”clicks” when I press the red/green buttons of the Mobile station. I have used DIP switches to program the signal and set the address to 27 according to the Märklin manual. I switched DIP switches 1, 2, 4, and 5 to the 'on' position. What could be the reason for this kind of problem? Your signal have two adresses. The first are main while the second are underlaying adress which cannot be change. When you set your signal at adress 27, the underlaying adress are 28. You can see it at the keyboard character window when there are standing 27 on the left and 28 in the right. |
H0
DCC = Digital Command Control
|
|
|
|
|
|
Joined: 12/08/2006(UTC)
Posts: 9,273
|
Originally Posted by: marklinist5999 The dip switches override mfx I think. Watch the Model train fun guy program it on YouTube. I have a CS 3, so it's a little different from the MS 2. I think after he set the switches in dcc he changed the protocol back to mfx, but it's been too long to recall. The mfx protocol in the digital signal cannot been register with the MS2. Also same with the m83/m84. Just only MM or DCC protocol can be use by add manually. |
H0
DCC = Digital Command Control
|
|
|
|
|
|
marklin-users.net community | Forum
»
General topics
»
General MRR
»
Problems with installing the main signal(76493) into Mobile station
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
