 Joined: 02/02/2023(UTC) Posts: 68 Location: Stockholm
|
Can i have Märklin digital signals on
Märklin bridges for C track?
|
 1 user liked this useful post by Mille
|
|
|
|
 Joined: 10/02/2021(UTC) Posts: 3,887 Location: Michigan, Troy
|
I havn't done it, but if the decoder fits under the track, or you can hide the wires then I don't see why not. Maybe route the wires from under the bridge by drilling a hole, then fit the deoder on the bottom of the ramp, then connect the signal and secure it.
|
|
|
|
|
|
 You have been a member since:: 04/02/2011(UTC) Posts: 3,559 Location: Paris, France
|
Hi Mille
Here are my thoughts on the subject. I do have both C Track bridges and digital signals but I never implemented a signal on a bridge.
I believe semaphores (like 70392) could be implemented (normally on the right side, in Germany) but this requires a large surgery of a straight bridge with a significant "overgrow" of the mechanism outside of the bridge which distances with a prototypical aspect.
Regarding light signals, it looks better and seems to me:
- there is no implantation on C-Track bridges without doing a minimal surgery of the bridge and of the signal connector support to keep only the connector and the mechanical locking of the signal.
- this is only possible on straight bridges as with curved bridges, even in absence of signals some Märklin units bump on railings
- of course, the digital relay must be located under the table.
- Viessman Light signals have a "Steckfuss" which requires drilling a 5.5 mm diam. hole which also will be difficult to hide unless using the signal base 4733 and doind some surgery.
Cheers
Jean |
|
1 user liked this useful post by JohnjeanB
|
|
|
|
Joined: 02/02/2023(UTC) Posts: 68 Location: Stockholm
|
Thanks for information
Any good Idea for wiring between my
two levels of tracks?
|
|
|
|
|
|
You have been a member since:: 04/02/2011(UTC) Posts: 3,559 Location: Paris, France
|
Hi
I think you have these solutions:
- drill a hole into all pillar segments and near the bridge separation
- have the cables hidden between the rails and the bridge
- a combination of these solutions
Cheers
Jean |
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
