CS3 for other guages Share  Email this topic  LinkBack Topic URL  Retweet this Topic  Share Topic on Google+  Like this Topic  Share on Facebook  Digg this Topic  Reddit this Topic  Share on Tumblr Options  Watch this topic  Print this topic View » Normal Threaded

Previous Topic Next Topic

Tuby		#1 Posted : 01 February 2023 00:34:21(UTC) Retweet
Joined: 24/04/2021(UTC) Posts: 5 Location: Kildare, Monasterevan		I will have to downsize my layout as a result of a house move. Given that the space available to me in the new house is only about two thirds what I currently enjoy I have decided to switch to TT guage. Can I use my CS3 with DCC models in this guage?
User Profile View All Posts by User View Thanks

	Wish to join the discussion?! Login to your marklin-users.net community | Forum accountor Register a new forum account. Or Connect via Facebook

KNed_		#2 Posted : 01 February 2023 10:58:16(UTC) Retweet
Joined: 12/01/2022(UTC) Posts: 5 Location: Netherlands		Yes, no problem. I've no experience with it but the CS3 is independent of the scale. The only thing to take into account is the output voltage. Sometimes smaller scales like N uses a little bit lower output voltage. Don't know if you can set that somewhere in the CS3
		Dutch railway models database: www.nlinmodel.nl
		WWW
1 user liked this useful post by KNed_		H0
User Profile View All Posts by User View Thanks

H0		#3 Posted : 01 February 2023 11:21:24(UTC) Retweet
Joined: 16/02/2004(UTC) Posts: 15,104 Location: DE-NW		Consider getting the 60041 power supply that can be switched between 19 V and 15 V. While the decoders should be able to handle 19 V, the 15 V setting will reduce the wear on the motors. https://www.trix.de/de/p..._torrpdb_pi1%5Blang%5D=2
		Regards Tom --- "In all of the gauges, we particularly emphasize a high level of quality, the best possible fidelity to the prototype, and absolute precision. You will see that in all of our products." (from Märklin New Items Brochure 2015, page 1) ROFLBTCUTS
2 users liked this useful post by H0		Bigdaddynz, marklinist5999
User Profile View All Posts by User View Thanks

Tuby		#4 Posted : 01 February 2023 22:17:23(UTC) Retweet
Joined: 24/04/2021(UTC) Posts: 5 Location: Kildare, Monasterevan		Thank you folks that has been very helpfull
User Profile View All Posts by User View Thanks

rhfil		#5 Posted : 02 February 2023 14:59:31(UTC) Retweet
Joined: 05/09/2014(UTC) Posts: 371 Location: NEW HAMPSHIRE, Somersworth		It is independent of the scale but not of the decoder program in the loco.
User Profile View All Posts by User View Thanks

H0		#6 Posted : 03 February 2023 16:31:00(UTC) Retweet
Joined: 16/02/2004(UTC) Posts: 15,104 Location: DE-NW		Originally Posted by: rhfil It is independent of the scale but not of the decoder program in the loco. Some say so, some say so. The are different power supplies for LGB, I, H0, and N with different voltages. High voltages are bad for small motors. Larger scales work better with higher voltages. But the CS3 is the same.
		Regards Tom --- "In all of the gauges, we particularly emphasize a high level of quality, the best possible fidelity to the prototype, and absolute precision. You will see that in all of our products." (from Märklin New Items Brochure 2015, page 1) ROFLBTCUTS
1 user liked this useful post by H0		marklinist5999
User Profile View All Posts by User View Thanks

Users browsing this topic

OceanSpiders 2.0