Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline tinroofrusted  
#1 Posted : 27 July 2022 05:40:57(UTC)
tinroofrusted

Korea, Republic Of   
Joined: 16/08/2021(UTC)
Posts: 18
Location: Seoul-teukbyeolsi, Seoul
Hey, all,

This is Thomas. I recently purchased a 3046 French heavy locomotive. It needs help, so I made it digital. The smoke unit works but is very old (1965??) and I am interested in getting a backup just in case the capillary gives up the ghost. I am not huge on the smoking unit, but I want it there just in case the kids come over. My problem is that this is the first "smoker" I have ever tried to "smoke" and I can not figure out which replacement would fit. Has anyone ever bought a smoke unit for a 3046 and if so, which one did you purchase? What should I look for in measurements? The pipe looks fine. The Capillary wire works, but could be pulled and use a good cleaning.... but it is old and I would like to have a backup just in case it breaks. Any help is fantastic. Take care, T
Offline torhb  
#2 Posted : 27 July 2022 14:03:16(UTC)
torhb


Joined: 08/11/2001(UTC)
Posts: 38
Location: Oppegård,
Originally Posted by: tinroofrusted Go to Quoted Post
Hey, all,

This is Thomas. I recently purchased a 3046 French heavy locomotive. It needs help, so I made it digital. The smoke unit works but is very old (1965??) and I am interested in getting a backup just in case the capillary gives up the ghost. I am not huge on the smoking unit, but I want it there just in case the kids come over. My problem is that this is the first "smoker" I have ever tried to "smoke" and I can not figure out which replacement would fit. Has anyone ever bought a smoke unit for a 3046 and if so, which one did you purchase? What should I look for in measurements? The pipe looks fine. The Capillary wire works, but could be pulled and use a good cleaning.... but it is old and I would like to have a backup just in case it breaks. Any help is fantastic. Take care, T


I believe the Märklin 7226 is the correct smoker.

Regards
Tor
Tor Harald Bøhler
Oppegård, Norway
Offline Unholz  
#3 Posted : 27 July 2022 15:54:15(UTC)
Unholz

Switzerland   
Joined: 29/07/2007(UTC)
Posts: 1,332
Location: Switzerland
I believe the same as Tor, see here: https://www.maerklin.de/...4cdd56f0b997b52ebfd9ce5d

This steam generator from Seuthe also seems to fit: https://modellbaustudio-...H0-10-16V-Fabrikneu.html
Offline tinroofrusted  
#4 Posted : 27 July 2022 23:10:19(UTC)
tinroofrusted

Korea, Republic Of   
Joined: 16/08/2021(UTC)
Posts: 18
Location: Seoul-teukbyeolsi, Seoul
Originally Posted by: torhb Go to Quoted Post
Originally Posted by: tinroofrusted Go to Quoted Post
Hey, all,

This is Thomas. I recently purchased a 3046 French heavy locomotive. It needs help, so I made it digital. The smoke unit works but is very old (1965??) and I am interested in getting a backup just in case the capillary gives up the ghost. I am not huge on the smoking unit, but I want it there just in case the kids come over. My problem is that this is the first "smoker" I have ever tried to "smoke" and I can not figure out which replacement would fit. Has anyone ever bought a smoke unit for a 3046 and if so, which one did you purchase? What should I look for in measurements? The pipe looks fine. The Capillary wire works, but could be pulled and use a good cleaning.... but it is old and I would like to have a backup just in case it breaks. Any help is fantastic. Take care, T


I believe the Märklin 7226 is the correct smoker.

Regards
Tor



Thanks, Tor. I looked everywhere and could not find this information. I was probably looking in the wrong direction. I just bought one. Thanks again, Thomas
Offline tinroofrusted  
#5 Posted : 27 July 2022 23:11:53(UTC)
tinroofrusted

Korea, Republic Of   
Joined: 16/08/2021(UTC)
Posts: 18
Location: Seoul-teukbyeolsi, Seoul
Originally Posted by: Unholz Go to Quoted Post
I believe the same as Tor, see here: https://www.maerklin.de/...4cdd56f0b997b52ebfd9ce5d

This steam generator from Seuthe also seems to fit: https://modellbaustudio-...H0-10-16V-Fabrikneu.html


Thanks, Unholz, You and Tor have me straightened out. I just did not know where to look. I appreciate it, T
Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2022, Yet Another Forum.NET
This page was generated in 0.432 seconds.