Joined: 25/04/2022(UTC) Posts: 19 Location: WA, Perth
|
Hello I have a gauge 1 T18 model 5524. It has a decoder with f0 for light and f1 to activate the smoke. There are another 5 wires not connected in the flat ribbon cable. I cannot find an instruction or anything about that decoder. The one in other model look quite different. There is no number on it and I was wondering if somebody would know about it. Basically I would like to know if there are more functions available which would use the extra wires. here are some pictures:    Thanks to anybody with some info or link where to find that decoder specs Cheers Zurky Hello again, after more research, it looks like that decoder is a 6095 model (https://www.worthpoint.com/worthopedia/marklin-maerklin-marklin-6095-digital-504192453). Trying to find more... Right, I still have not found the spec for that decoder, but for what I saw, this decoder has functions F0 to F4, so I measure them: F0: lights (front light uses orange and the brown as common, but the rear light uses the black and the blue) F1: smoke generator red wire F2: aux slate wire F3: aux purple wire F4: aux green wire With F1 to F4 using the brown flat ribbon cable as a common. Note that this brown give me the positive 15V DC as common! It seems also that the white and yellow wires are always ON , -15V DC (brown as common) Edited by user 17 June 2022 12:21:33(UTC)
| Reason: tested each decoder flat ribbon wires
|
|
|
|
Joined: 17/09/2006(UTC) Posts: 18,771 Location: New Zealand
|
|
 1 user liked this useful post by Bigdaddynz
|
|
|
Joined: 25/04/2022(UTC) Posts: 19 Location: WA, Perth
|
Thanks, there is certainly lots of good info on that site. I am sure I will get closer to my search there. Cheers Zurky
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.