marklin-users.net community
| Forum
Welcome to the forum
Home
Community Forum
Welcome Guest! To enable all features please
Login
or
Register
.
Forum
Active Topics
Login
Register
Notification
Error
OK
marklin-users.net community | Forum
»
General topics
»
General MRR
»
Marklin's new Turntable 74861
3 Pages
<
1
2
3
Go to Page...
Marklin's new Turntable 74861
Share
Email this topic
LinkBack Topic URL
Retweet this Topic
Share Topic on Google+
Like this Topic
Share on Facebook
Digg this Topic
Reddit this Topic
Share on Tumblr
Options
Watch this topic
Print this topic
View
» Normal
Threaded
Previous Topic
Next Topic
Don Morris
#101
Posted :
12 October 2021 01:04:18(UTC)
Retweet
Joined: 14/01/2016(UTC)
Posts: 37
Location: New Zealand
Have recently received my 74861, other than some damage that occurred in shipping, pleased with item. As to installation I had virtually no problems, device runs well , perhaps I was lucky. The only issue that I have is the apparent inability to place an turntable icon on the track plan, maybe it is me?
1 user liked this useful post by Don Morris
grnwtrs
User Profile
View All Posts by User
View Thanks
Duchêne
#102
Posted :
20 February 2022 14:14:21(UTC)
Retweet
Joined: 30/10/2021(UTC)
Posts: 3
Location: Pays-de-la-Loire, Saint-Jean
Originally Posted by: JohnjeanB
Hi
there is a new video on how to drive a 74861 turntable with an MS2
I know it is in German but with a little patience you may learn German
Initialisation is by:
* turning the power OFF and ON the tracks
* within 5 seconds, send the order 225 red, 225 green 225 red again
Then it is driven like a switch following this table
Cheers
Jean
Hello,
I tried but the turntable did not react with its commands. Whereas on address N°1 the red and green keys cause the machine to beep. Note: the first time I turned it on it was spinning a bit. Should it be reset? And how ?
Sincerely,
a new AC Marklinist
Duchêne from France
User Profile
View All Posts by User
View Thanks
JohnjeanB
#103
Posted :
20 February 2022 16:00:08(UTC)
Retweet
Joined: 04/02/2011(UTC)
Posts: 3,343
Location: Paris, France
Originally Posted by: Duchêne
Hello,
I tried but the turntable did not react with its commands. Whereas on address N°1 the red and green keys cause the machine to beep. Note: the first time I turned it on it was spinning a bit. Should it be reset? And how ?
Sincerely,
a new AC Marklinist
Duchêne from France
Hi Duchêne (can't be your first name can it?)
I don't know where is your problem but I suggest you to:
- verify the connection between the programming track of your CS3 and the 2 screw terminal under the TT and then apply power.
- check that your TT is not already registered in your CS3
Like here
If it is there, push the key (circled in blue at bottom right of the spcreen.
Then you get this screen
If it is not there, select "Modifier" (Edit) and then "Chercher Article MFX" (Look for MFX device) like here
Then you should be in business
Cheers
Jean
My layout videos
latest vid
marshalling yard
My Layout
User Profile
View All Posts by User
View Thanks
Duchêne
#104
Posted :
20 February 2022 17:05:27(UTC)
Retweet
Joined: 30/10/2021(UTC)
Posts: 3
Location: Pays-de-la-Loire, Saint-Jean
Hi jean,
I am on MS2 as it was indicated on your initial post!!! (and so I don't have CS2 or CS 3; nobody is perfect!)
Merci pour votre réactivité !
Cheers
Yves
User Profile
View All Posts by User
View Thanks
JohnjeanB
#105
Posted :
20 February 2022 18:31:19(UTC)
Retweet
Joined: 04/02/2011(UTC)
Posts: 3,343
Location: Paris, France
Sorry Yves , I am not familiar with the MS2 with regards to searching for lost MFX devices.
Here is a video on the subject alas in German. I will watch it to so if I can help.
Turntable init from 1:42 into, the video. Set the MS2 to factory address 225, then press STOP, then STOP again (power on, must be with 5 seconds), then on address push RED, GREEN, RED and then the TT starts looking for its configuration (where the access tracks are located) A 360° rotation is started before the init is complete.
The beeps are transmitted for each segment; High pitch when there is a trach, low-pitched when there is no track
At 2:58 init is finished. Next the table I sent previously can be use for driving the TT
Cheers
Jean
My layout videos
latest vid
marshalling yard
My Layout
User Profile
View All Posts by User
View Thanks
Duchêne
#106
Posted :
20 February 2022 18:39:01(UTC)
Retweet
Joined: 30/10/2021(UTC)
Posts: 3
Location: Pays-de-la-Loire, Saint-Jean
I know this video, of course, that I've seen several times but apparently, the 74861_TT is no longer recognized in 225 by the MS2...
User Profile
View All Posts by User
View Thanks
JohnjeanB
#107
Posted :
20 February 2022 18:53:00(UTC)
Retweet
Joined: 04/02/2011(UTC)
Posts: 3,343
Location: Paris, France
Then it may mean:
- the address was changed for another one
- the MS2 is not connected to the TT
- the TT decoder is not OK
Sorry
Jean
My layout videos
latest vid
marshalling yard
My Layout
1 user liked this useful post by JohnjeanB
grnwtrs
User Profile
View All Posts by User
View Thanks
Drongo
#108
Posted :
18 March 2022 03:04:28(UTC)
Retweet
Joined: 03/06/2008(UTC)
Posts: 1,232
Location: Sydney, NSW
My TT was posted to Marklin for repairs on 3rd February 2022 from Sydney, Australia and arrived in Germany on 13th February 2022. It was delivered to Marklin on 16th March 2022. So much for German efficiency.
. Now I have to wait for Marklin to lodge it into their system and then for it to be repaired and them posted back to me.
Take it easy . . . . or any other way you can get it !!!!
User Profile
View All Posts by User
View Thanks
marklinist5999
#109
Posted :
18 March 2022 12:29:28(UTC)
Retweet
Joined: 10/02/2021(UTC)
Posts: 3,401
Location: Michigan, Troy
It been taking since last May for a local family to get a black granite headstone for their parents grave from India. Once it arrives here, it will still need engraving done, and the cutting tools are also in short supply. The stone was quarried in January.
It's taking longer for everything, but more workers are returning, however, a new covid surge has hit China, and the UK.
User Profile
View All Posts by User
View Thanks
Drongo
#110
Posted :
03 April 2022 03:03:52(UTC)
Retweet
Joined: 03/06/2008(UTC)
Posts: 1,232
Location: Sydney, NSW
Originally Posted by: Drongo
My TT was posted to Marklin for repairs on 3rd February 2022 from Sydney, Australia and arrived in Germany on 13th February 2022. It was delivered to Marklin on 16th March 2022. So much for German efficiency.
. Now I have to wait for Marklin to lodge it into their system and then for it to be repaired and them posted back to me.
And Marklin sent me an email on 25th March 2022 to say that they have recorded in their books and will be repaired - at some time.
Everyone blames Covid when something goes wrong - BS - it's just people have become lazy and work is optional.
Take it easy . . . . or any other way you can get it !!!!
User Profile
View All Posts by User
View Thanks
Puttputtmaru
#111
Posted :
11 May 2022 19:49:33(UTC)
Retweet
Joined: 15/02/2021(UTC)
Posts: 207
Location: Quebec, Montreal
I have found this video (chat) tutorial on the Marklin Turntable 74861 (now 74782) it is very in depth on everything I think you need to know:
(Not sure if it was mentioned before)
1 user liked this useful post by Puttputtmaru
Bosse
User Profile
View All Posts by User
View Thanks
Goofy
#112
Posted :
12 May 2022 06:22:32(UTC)
Retweet
Joined: 12/08/2006(UTC)
Posts: 9,143
Märklin did present a new turntable with new design.
H0
DCC = Digital Command Control
User Profile
View All Posts by User
View Thanks
Drongo
#113
Posted :
12 May 2022 12:54:18(UTC)
Retweet
Joined: 03/06/2008(UTC)
Posts: 1,232
Location: Sydney, NSW
Marklin returned my TT today repaired (I hope).
I have noticed that Marklin has introduced a new version of the TT. Does anyone know why ? Is it a different model or is it an improved version ?
Greg
Take it easy . . . . or any other way you can get it !!!!
User Profile
View All Posts by User
View Thanks
Puttputtmaru
#114
Posted :
12 May 2022 13:50:51(UTC)
Retweet
Joined: 15/02/2021(UTC)
Posts: 207
Location: Quebec, Montreal
Originally Posted by: Drongo
Marklin returned my TT today repaired (I hope).
I have noticed that Marklin has introduced a new version of the TT. Does anyone know why ? Is it a different model or is it an improved version ?
Greg
Beside the fact that it looks weathered compared to the previous version not much can be found yet on it.
The change in # from 74781 to 74782 could mean that it has not changed much. But only speculation for now.
Below is a side by side of the « old » and new description from the catalogue.
The only difference I see
is that the track have to be powered individually on the new one « . Locomotive operating current must be supplied separately to the track spoke connections » whereas it was supplied to the track spoke connections by means of the turntable deck in the ‘older » version.
User Profile
View All Posts by User
View Thanks
mbarreto
#115
Posted :
12 May 2022 23:10:58(UTC)
Retweet
Joined: 18/02/2008(UTC)
Posts: 1,274
About the just announced turntable, it seems to look better due to the darker color (I think it is just darker and not weathered) probably
will look better. About if it will be easier to install correctly, I think it is better wait for reviews and listen to what the early adopters will say.
Miguel
Best regards,
Miguel
Mostly Märklin H0.
User Profile
View All Posts by User
View Thanks
JohnjeanB
#116
Posted :
13 May 2022 02:06:40(UTC)
Retweet
Joined: 04/02/2011(UTC)
Posts: 3,343
Location: Paris, France
Hi
Originally Posted by: Puttputtmaru
The only difference I see
is that the track have to be powered individually on the new one «. Locomotive operating current must be supplied separately to the track spoke connections» whereas it was supplied to the track spoke connections by means of the turntable deck in the ‘older» version.
As you said the darker color (no weathering) looks better. The previous new TT had the same constrain regarding the obligation to power each individual track.
Here is the picture from Julie on the French 3 rails forum
https://forum.3rails.fr/u/julaye/summary
regarding the underside of this version. Merci Julie, j'espère que tu me pardonne l'emprunt de ta photo.
My cristal ball is not better than anyone but I suspect Märklin has corrected very small details (plastic color). My guess is it is the same program and sound.
The access track may be changing slightly with crossing walkway and different rails.
Cheers
Jean
My layout videos
latest vid
marshalling yard
My Layout
2 users liked this useful post by JohnjeanB
mbarreto
,
Martti Mäntylä
User Profile
View All Posts by User
View Thanks
Drongo
#117
Posted :
26 May 2022 12:36:48(UTC)
Retweet
Joined: 03/06/2008(UTC)
Posts: 1,232
Location: Sydney, NSW
The TT is on its way back to Marklin - AGAIN.
I borrowed a friends TT, connected it to my EcoS (with the update) and it worked. Connected my TT and it didn't work. Removed the decoder and tested it on the Lokprogrammer and the decoder didn't respond.
Marklin service claimed that they reset set the TT and tested it. B S. They obviously didn't test it. I'm advising anyone who is thinking of buying this TT, to think again - DON'T, unless you want to spend the rest of your life trying to get the think to work. It is poorly designed - the inserts have to be critically installed with only a small fraction of a millimetre out and the bridge will jam. It is poorly manufactured - the components are extremely fragile and break easily and the microscopic inserts that are placed where the inserts go, fall out easily and also jam the bridge. For the price - it's a waste of money.
You have been warned.
Regards
Greg
Take it easy . . . . or any other way you can get it !!!!
User Profile
View All Posts by User
View Thanks
JohnjeanB
#118
Posted :
26 May 2022 13:00:22(UTC)
Retweet
Joined: 04/02/2011(UTC)
Posts: 3,343
Location: Paris, France
Hi Greg
I understand your disappointment. I had a similar experience on a non-systematic failure on a loco. With the sound the loco will stop after a while but sending digital orders, the decoder would restart. I sent the loco to Märklin and waited for 3 months to have the loco returned with the exact same problem. I was shocked because it came right of a Mega startpackung 29640 with a CS2 and 2 trains for nearly 2000 USD.
Apparently, Märklin is not good at fixing intermittent problems but they repaired many of my other items (CS2, Henschel Wegmann loco, etc).
Also I know a few people who purchased the 74861 TT who had no problem with it. Exceptions: non-horizontal, non plane installation, fiddling with the lock servo.
Did you tested the TT with another central station? It happened to me a few time I had to unlock a digital / MFX device by changing the CS (in my case CS1, MS1, CS2 or CS3).
Honestly I can't see Märklin (Göppingen Germany) NOT testing your TT, but if it works then they return the TT without doing ANYTHING further. So do try with a friends CS3 or similar.
MFX registration can be a pain in the neck especially if you have many registered locos and the registration can be hidden somewhere. This is where A SECOND MFX central Unit is key because the registration process starts from zero (on the "other CS" and then on yours).
Cheers
Jean
My layout videos
latest vid
marshalling yard
My Layout
User Profile
View All Posts by User
View Thanks
Drongo
#119
Posted :
27 May 2022 14:17:26(UTC)
Retweet
Joined: 03/06/2008(UTC)
Posts: 1,232
Location: Sydney, NSW
Originally Posted by: JohnjeanB
Hi Greg
I understand your disappointment. I had a similar experience on a non-systematic failure on a loco. With the sound the loco will stop after a while but sending digital orders, the decoder would restart. I sent the loco to Märklin and waited for 3 months to have the loco returned with the exact same problem. I was shocked because it came right of a Mega startpackung 29640 with a CS2 and 2 trains for nearly 2000 USD.
Apparently, Märklin is not good at fixing intermittent problems but they repaired many of my other items (CS2, Henschel Wegmann loco, etc).
Also I know a few people who purchased the 74861 TT who had no problem with it. Exceptions: non-horizontal, non plane installation, fiddling with the lock servo.
Did you tested the TT with another central station? It happened to me a few time I had to unlock a digital / MFX device by changing the CS (in my case CS1, MS1, CS2 or CS3).
Honestly I can't see Märklin (Göppingen Germany) NOT testing your TT, but if it works then they return the TT without doing ANYTHING further. So do try with a friends CS3 or similar.
MFX registration can be a pain in the neck especially if you have many registered locos and the registration can be hidden somewhere. This is where A SECOND MFX central Unit is key because the registration process starts from zero (on the "other CS" and then on yours).
Cheers
Jean
Hi Jean,
Yes we tested it with a CS3 as well.
Take it easy . . . . or any other way you can get it !!!!
User Profile
View All Posts by User
View Thanks
Minok
#120
Posted :
28 May 2022 05:06:09(UTC)
Retweet
Joined: 15/10/2006(UTC)
Posts: 2,313
Location: Washington, Pacific Northwest
The key weaknesses of the initial design that hopefully they addressed some of in the new version, beyond the cosmetic improvement, which are welcome:
1) The small keys at the exit will catch due to the way the bridge section has hard right angles where the keys pass under the bridge. If they angled those ends, then a slight misalignment would no longer jam the turntable.
2) The table is a bit flexible - installing as steel stiffening ring under it would stabilize and reduce turn table jamming occurrences.
Toys of tin and wood rule!
---
My Layout Thread on
marklin-users.net:
InterCity 1-3-4
My YouTube Channel:
https://youtube.com/@intercity134
User Profile
View All Posts by User
View Thanks
Drongo
#121
Posted :
28 May 2022 08:51:02(UTC)
Retweet
Joined: 03/06/2008(UTC)
Posts: 1,232
Location: Sydney, NSW
Originally Posted by: Minok
The key weaknesses of the initial design that hopefully they addressed some of in the new version, beyond the cosmetic improvement, which are welcome:
1) The small keys at the exit will catch due to the way the bridge section has hard right angles where the keys pass under the bridge. If they angled those ends, then a slight misalignment would no longer jam the turntable.
2) The table is a bit flexible - installing as steel stiffening ring under it would stabilize and reduce turn table jamming occurrences.
This is hopefully what you believe that they have done, and I agree with you. However, is Marklin capable to do this ? I mean, from my past experience with Marklin they aren't to forthcoming with admitting they make mistakes. AND if they have made these improvements shouldn't we be allowed to return the old TT and get the revised version ? OR is this asking for too much ?
Take it easy . . . . or any other way you can get it !!!!
User Profile
View All Posts by User
View Thanks
Minok
#122
Posted :
28 May 2022 09:15:58(UTC)
Retweet
Joined: 15/10/2006(UTC)
Posts: 2,313
Location: Washington, Pacific Northwest
Originally Posted by: Drongo
Originally Posted by: Minok
The key weaknesses of the initial design that hopefully they addressed some of in the new version, beyond the cosmetic improvement, which are welcome:
1) The small keys at the exit will catch due to the way the bridge section has hard right angles where the keys pass under the bridge. If they angled those ends, then a slight misalignment would no longer jam the turntable.
2) The table is a bit flexible - installing as steel stiffening ring under it would stabilize and reduce turn table jamming occurrences.
This is hopefully what you believe that they have done, and I agree with you. However, is Marklin capable to do this ? I mean, from my past experience with Marklin they aren't to forthcoming with admitting they make mistakes. AND if they have made these improvements shouldn't we be allowed to return the old TT and get the revised version ? OR is this asking for too much ?
If they fix more than just the cosmetics then an upgrade kit you buy is probably the best you can expect from Märklin. Maybe dealer installed.
Toys of tin and wood rule!
---
My Layout Thread on
marklin-users.net:
InterCity 1-3-4
My YouTube Channel:
https://youtube.com/@intercity134
User Profile
View All Posts by User
View Thanks
ocram63_uk
#123
Posted :
28 May 2022 11:21:45(UTC)
Retweet
Joined: 07/01/2015(UTC)
Posts: 708
Location: England, Suffolk
it would be interesting to have a poll amongst the buyers of this forum re the TT
1) did it work out of the box? Y/N
2) did it need Marklin's assistance out of the box? Y/N
3) did you go crazy trying to get it to work with whichever control center you have? Y/N
4) is the available documentation, videos, internet blogs etc. enough for a good setup? Y/N
simple answers nothing else required 😊
User Profile
View All Posts by User
View Thanks
Drongo
#124
Posted :
29 May 2022 08:29:30(UTC)
Retweet
Joined: 03/06/2008(UTC)
Posts: 1,232
Location: Sydney, NSW
Originally Posted by: Minok
Originally Posted by: Drongo
Originally Posted by: Minok
The key weaknesses of the initial design that hopefully they addressed some of in the new version, beyond the cosmetic improvement, which are welcome:
1) The small keys at the exit will catch due to the way the bridge section has hard right angles where the keys pass under the bridge. If they angled those ends, then a slight misalignment would no longer jam the turntable.
2) The table is a bit flexible - installing as steel stiffening ring under it would stabilize and reduce turn table jamming occurrences.
This is hopefully what you believe that they have done, and I agree with you. However, is Marklin capable to do this ? I mean, from my past experience with Marklin they aren't to forthcoming with admitting they make mistakes. AND if they have made these improvements shouldn't we be allowed to return the old TT and get the revised version ? OR is this asking for too much ?
If they fix more than just the cosmetics then an upgrade kit you buy is probably the best you can expect from Märklin. Maybe dealer installed.
Buy an upgrade kit ? You must be joking. Firstly, will Marklin produce the upgrade kit, and secondly, if the upgrade kit is needed to improve the operation of the TT, then Marklin should provide free of charge. This reminds me of Microsoft selling operating systems. DOS 3.3 was great, but to improve and keep up with the new technology, they sold DOS 4 - whoops, it had problems, so they sold DOS 5 which had problems and then DOS 6, until Windows appeared and the process went on. Each time to but the updates. Bill became extremely rich and now the upgrades are free.
Take it easy . . . . or any other way you can get it !!!!
User Profile
View All Posts by User
View Thanks
Users browsing this topic
OceanSpiders 2.0
3 Pages
<
1
2
3
Go to Page...
marklin-users.net community | Forum
»
General topics
»
General MRR
»
Marklin's new Turntable 74861
Forum Jump
marklin-users.net community | Forum
General topics
- General MRR
- H0-scale
- Small scale
- Big scale
- Prototype
--- Videos
----- Steam
----- Electric
----- Diesel
----- Training and Instructional
----- Accidents
- Digital
- Model railroad software
- Model railroad photography
- Great layouts I have seen...
- News from Märklin and others
- Events, forum member meets, exhibitions & TV shows
Your layout, your trains and more....
- The Public Gallery by our members
Reviews
- Loco Reviews
- Reviews of rolling stock
- Accessories reviews
- Model kit reviews
- Digital components and Software reviews
Collector's Corner
- Collector's Corner general
- Märklin Sprint
- Construction kits
- Steam engines
- Tinplate toys
- Faller collectibles and other vintage accessories
The Projects & Workshop area
- Track plans
- Painting & Weathering
- Model railroad wiring
- Model kits & layout details, kitbashing and such
The Club Corner
- Model railroad & related club area - general
You
cannot
post new topics in this forum.
You
cannot
reply to topics in this forum.
You
cannot
delete your posts in this forum.
You
cannot
edit your posts in this forum.
You
cannot
create polls in this forum.
You
cannot
vote in polls in this forum.
|
Powered by YAF.NET
|
YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.884 seconds.