Hi all
With the recent update I seem to be having a problem with loco function mapping. When in edit loco mode and after opening the configuration tab the CS will "read loco decoder" but won't open the "mapping" box. Before, you merely pressed one of the function keys but now you have to press on the three lines in the top right hand corner and choose from the drop down box.
Anyone having the same problem or is it just me?
Kevin.

Hi
Kevin, I just did the test with one of my MFX locos 39030 (BR 18.5)

Here are the screens from version 2.3.1 (8)
- when all parameters are loaded

- when a function key is pressed

- when modifying a logic function


So to answer your question it works on recent locos
Yesterday, when working on an older loco 39401 (SNCF CC40108) the parameter screen was totally empty where with my CS2 I could access to all the motor parameters
So on older digital locos, the functionality seems to be reduced or my 39401 loco has decoder problems
Cheers
Jean

Hi Guys,
Thanks for your input and suggestions.
I spent a lot of time yesterday trying all sorts of things and I have finally come to the conclusion that with the latest update it is difficult function mapping using POM (Programming On Main)
So I have taken all my digital locos and put them on the test track which has been fairly successful.
There are two decoders that won't map, one is an old mSD retrofit decoder and the other is a recently purchased factory fitted decoder in my 39568 Ce loc. They have all been updated with the latest firmware.
I don't know whether there is an issue with the new update or what, but I used to be able to do mapping on POM before the change.
Thought I would just give this feedback for what its worth.
Kevin