Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline swisslocofan  
#1 Posted : 26 May 2021 23:56:39(UTC)
swisslocofan

United States   
Joined: 19/10/2018(UTC)
Posts: 5
Location: California, San Diego
Hi everyone
I would much appreciate anyone’s insight into the following:
Instead of using the m84 with Marklin signals 74391 (I only use simple red/green main line signals), I would like to use the less expensive Viessmann signals 4011 with the ESU SignalPilot decoder 51840. The m84 can only control 4 signals, whereas the ESU SignalPilot can control 8 of them.
Can I implement the above using my CS3? Anyone who has actually done this?
Many thanks!
tom
Offline French_Fabrice  
#2 Posted : 27 May 2021 13:42:57(UTC)
French_Fabrice

France   
Joined: 16/05/2011(UTC)
Posts: 1,367
Location: Lyon, France
Hello Tom,

I have not used the 51840, but I've heard that you need a LokProgrammer in order to correctly program the SignalPIlot.

Extract of the manual:
The SignalPilot must be configured with the LokProgrammer and
the appropriate software. Although all settings would also be ac-
cessible via CV programming, this procedure is not recommended
or documented due to its complexity.
Confused

If you don't have such a LokProgrammer, then it may become complicated.

If you have only red/green LED signals like Vie4011, then have a look at LDT LS-DEC-8x2: https://www.ldt-infocent...oku.php?id=en:ls-dec-8x2
It may provide a better alternative.

I have already used LS-DEC-DB decoder to drive Vie4017/4018 signals, and it works very well. My CS is a CS2, but I don't think it is very different with the CS3.

My 2 cents.
Fabrice
Offline swisslocofan  
#3 Posted : 27 May 2021 19:04:46(UTC)
swisslocofan

United States   
Joined: 19/10/2018(UTC)
Posts: 5
Location: California, San Diego
Fabrice
Very kind of you. Thank you for your most helpful suggestion. I will check it out in more detail.
tom
Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2021, Yet Another Forum.NET
This page was generated in 0.401 seconds.