Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline nelson77  
#1 Posted : 01 February 2012 21:46:43(UTC)
nelson77


Joined: 24/01/2010(UTC)
Posts: 154
Location: Westminster, Md
Hello All,
I overfilled my Bigboy with smoke fluid now it has stopped smoking. What can I do to fix the seuthes?
Thanks
Nelson77
Westminster, Md
Offline Bigdaddynz  
#2 Posted : 01 February 2012 21:59:10(UTC)
Bigdaddynz

New Zealand   
Joined: 17/09/2006(UTC)
Posts: 18,434
Location: New Zealand
Try draining some of the fluid out of the smoke units, to about half full - use a syringe if you have one (a syringe should have come with the seuthe units).
Offline Kevin Weis  
#3 Posted : 01 February 2012 22:33:41(UTC)
Kevin Weis


Joined: 19/12/2010(UTC)
Posts: 128
Location: Maryland
After you drain it out don't know why there would be a problem with them. Maybe a piece of dirt lodged in the tube?? Or maybe some fluid got down between the tube shell and loc shell breaking the ground connection. Or some fluid got onto the contact tab (hot wire contact)?? Just maybe some things to check.

Regards, Kevin
Offline petestra  
#4 Posted : 01 February 2012 22:34:57(UTC)
petestra

United States   
Joined: 27/07/2009(UTC)
Posts: 5,778
Location: Leesburg,VA.USA
Hi, I have done this before though not with a big boy. I usually turn the Lok upside down over a paper towel while holding it tightly with two hands giving it a slight shake. Generally 2 or 3 drops will come out. PeterSmile
Offline DV  
#5 Posted : 01 February 2012 22:45:07(UTC)
DV

Australia   
Joined: 29/11/2009(UTC)
Posts: 924
Location: Mount Barker, South Australia
I do this all the time (having the steady hand of a maracas player)LOL LOL

All I do is get the corner of my hankie and dip it into the overfill. The hankie sucks up the fluid and, voila, she starts smoking.Flapper Flapper Flapper

Of course it helps if you have to do it as soon as you have overfilled it.

Has always worked for meLaugh Laugh Laugh
Dusan V
'I find your lack of faith (in Märklin) disturbing'
Offline kbvrod  
#6 Posted : 01 February 2012 22:47:07(UTC)
kbvrod

United States   
Joined: 23/08/2006(UTC)
Posts: 2,597
Location: Beverly, MA
Hi Nelson,all,
The folks have given you good advise,try those first.Next time,...double check that the smoke generator is seated properly.Then add a drop or two of smoke fluid and then test.IMHO.

Dr D(smoke is good!)
Offline Yumgui  
#7 Posted : 01 February 2012 22:55:22(UTC)
Yumgui

United States   
Joined: 20/03/2011(UTC)
Posts: 1,660
Location: Paris, France
If it's really bad, I pull out the entire smoke unit, receptacle and all, clean as described above with cloth/cotton swap, dab with lighter fluid to clean all surfaces, including those that may have spilled on the loco chassis below ...

Then, blow dry all parts with the hair dryer (if you can wrestle it from the FD, that is ... hmmm ;)
As I have no hair left to speak of, the above machine tool specializes in this smoke stack purpose exclusively ^^. ThumpUp

Y Tongue
If your M track is rusted ... DON'T throw it out !
Working on: https://studiogang.com/projects/all
My heavy train station renovation: https://youtu.be/QQlyNiq416A
Inspired by: http://www.nakedmarklin.com/... Am not alone in this universe, phew.
Offline nelson77  
#8 Posted : 06 February 2012 19:05:02(UTC)
nelson77


Joined: 24/01/2010(UTC)
Posts: 154
Location: Westminster, Md
Thanks to all,
I used a syringe and withdrew as much as I could. I let it sit for about an hour it is now working properly.
By the way what is the correct amount to use?
Thanks Again
Nelson77
Westminster, Md
Offline Webmaster  
#9 Posted : 06 February 2012 19:41:04(UTC)
Webmaster


Joined: 25/07/2001(UTC)
Posts: 11,154
Obviously "not too much", and that is a relative issue... BigGrin

I'd say to be restrictive, and top up when needed after a few minutes.

I myself had the habit of filling up too much, kind a like one 3rd full or so, and the only result I got was boiling oil that splattered over the loco body.
When enough oil had been lost, it usually started to smoke... But waste of smoke oil indeed...

Am a bit reluctant myself to smoke units nowadays, they do draw extra current which can be used elsewhere...
It's a very nice show feature, though...
Juhan - "Webmaster", at your service...
He who asks a question is a fool for five minutes. He who does not ask a question remains a fool forever. [Old Chinese Proverb]
Offline H0  
#10 Posted : 06 February 2012 21:20:44(UTC)
H0


Joined: 16/02/2004(UTC)
Posts: 14,630
Location: DE-NW
Hi!

Märklin write "6 drops" - a piece of information that left me clueless.

Seuthe write "0.2 ml" - easy to do if you ever bought a Seuthe set and use the syringe that comes with it (or any other small syringe).
Regards
Tom
---
"In all of the gauges, we particularly emphasize a high level of quality, the best possible fidelity to the prototype, and absolute precision. You will see that in all of our products." (from Märklin New Items Brochure 2015, page 1) ROFLBTCUTS
UserPostedImage
thanks 1 user liked this useful post by H0
Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2022, Yet Another Forum.NET
This page was generated in 0.503 seconds.