Thanks a lot

Thank you Steven :-)


Dimitris

Good Work Fabrice

No, but my language setting was English before the update. During the update process, all were written in German.
Fortunately, in post #9 https://www.marklin-user...ched-yet.aspx#post457154 a pdf in English language was provided, who has helped me a lot. (Thanks to Shamu )

It's a pity a company like M is not able to at least write their software in English language, or provide enough documentation (pdf, html page, etc...) publicly available.

Cheers
Fabrice

Glad you are very happy with the CS2.

Hi All
I also updated without any problems, and noticed some new additions and changes. Thanks M.
The only problem I have now is where I can find a user manual where M explains all the new features and specifically how to implement and use them.
I think M should also update the user manual files with every software update.

In the past the green bars at the bottom of the screen indicating the locos’ speed and the speed dials on the control page, the value where the same.
Now I noticed the green letters “FS” above the value next to the bars and the value of the speed dials differ.
What is the reason for this and what does the letters “FS” mean?
Any help will be greatly appreciated.
Regards

Andreas

Hi all
I have also completed the 3.6.2 update. Everything was ok. The procedure took about 25 minutes.

regards LG

One word Dohhh!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

The first unit I Updated was a 60214, I have now updated a 60215 and it looks the same as Dimitris

Why not?
With MS2 and CS2 there are (potentially) more notches than speed steps. When turning the speed knob one notch further, you'll never know if the speed of the loco changes - unless you see a change or the controller displays the actual speed step.

The current "sometimes off by one" speed step display of the CS2 has no value for anybody.
But in general it's a good idea if people can choose between percent values, speed steps, scale speed in km/h, scale speed in MPH.

Hello!

60215 flawlessly updated also here. Tooks almost 50min, and 4 reboots.

I have 2 MS1 at diferent firmware levels... Since there is some reports of problems with MS* plugged-in, I decided to upgrade the CS2 without them connected.

I needed to leave my TrainRoom before try to update the CS2 with MS1 plugged (after the CS2 upgrade)... Some one had the experience to upgrade the firmware of them?

Previuosly I had the information that only CS1 could upgrade the MS1... fact?

Thanks!

Walter

Hi all,

Is there a way to modify the green speed bars back to show actual speedometer speed km/h or percentage of the max speed (0-100%)? I don't like this new FS speed step thing and would appreciate to get km/h or % back. Even my oldest son (6 years old) noticed this difference and was confused .

I have not tried my wireless iThingies = iPhone with MobileStation app and iPad with MainStation app with this newest CS2 update. I will try these later to see if they are like before. Maybe I have to move my wireless router back to the train room if the train running is still more fun with them .

The most annoying thing with these FS readings is when I run a newer mfx decoder equipped loco with many speed steps at say 60% speed and at the same time an older loco with much less speed steps at the same 60% speed. Then I change the view to some other than "Control", like "Memory", "Layout" etc. so that I can not see the speedometers of the locos. Then even when the two locos run at the same calibrated speed (60%) like today my black mfx Crocodile 37567 and an older 6090 decoder equipped 3756 green Crocodile other shows say FS 70 and other FS 8 (this is only an example and these FS readings are not the real ones).

I don't like this feature when I have to know and remember how many speed steps each loco has. I agree that these FS readings can be used for advantage in some situations, but it should really be possible to change back to km/h or % (0-100) readings if wanted by the user.

Or are everyone else of you who are using this latest update with CS2 really happy with this new "FS" feature? We are not, but other than this the new update is ok.

Regards,
Janne