marklin-users.net community | Forum

 
Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Please choose motor conversion for TEE marklin#3071
Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Previous Topic Next Topic
Offline thanethm11  
#1 Posted : 05 March 2013 12:25:06(UTC)
Retweet
thanethm11


Joined: 20/12/2011(UTC)
Posts: 31
Dear my friend.
I just boughh it in last week ang need to run it in my layout with mobile station1.
Please help me to choose moter conversion set & decorder.
60944?+ 60760?

Anyway, lamp will be changed to LED .

Regards,
ThanethM
Back to top

Wish to join the discussion?! Login to your marklin-users.net community | Forum accountor Register a new forum account. Or Connect via Facebook  
Back to top  
Offline RayF  
#2 Posted : 05 March 2013 13:13:11(UTC)
Retweet
RayF

Gibraltar   
Joined: 14/03/2005(UTC)
Posts: 15,840
Location: Gibraltar, Europe
Hi,

I converted mine with a 60944 motor kit and a 60942 MLD decoder. You can probably use the decoder from the 60760 kit, but I chose the MLD to give me MFX auto-registration. It's also a better decoder performance-wise.

I kept the original bulbs, and re-used the wiring that runs through the train for the white and red lamps at each end. However I had to do without the ability to change sliders from one end to the other, so as to simplify the conversion.
Ray
Mostly Marklin.Selection of different eras and European railways
Small C track layout, control by MS2, 100+ trains but run 4-5 at a time.
Back to top
Offline intruder  
#3 Posted : 05 March 2013 17:29:30(UTC)
Retweet
intruder

Norway   
Joined: 16/08/2006(UTC)
Posts: 5,382
Location: Akershus, Norway
I did a full rebuild, with additional wires through the train, and relays to control the interior light and rear lights.

In addition a bi-stable relay to switch between the two pick-up shoes.
This was doen a long time ago, with the conversion set 60904. Today that means motor set 60944 and decoder 60942, as stated by Ray.

If I should do this today (and maybe a future improvement) I would use an mfx sound decoder, as I did in the set 37500.

For further detail, see my website.
Best regards Svein, Norway
grumpy old sod
Back to top
WWW
Offline thanethm11  
#4 Posted : 06 March 2013 02:51:37(UTC)
Retweet
thanethm11


Joined: 20/12/2011(UTC)
Posts: 31
I will order motor conversion set-decorder form Germany as soon.

Thank a lot
Back to top
Offline thanethm11  
#5 Posted : 07 March 2013 03:35:42(UTC)
Retweet
thanethm11


Joined: 20/12/2011(UTC)
Posts: 31
Dear Sir.
Yesterday, i trial to use deltra decorder 66031 to run this car with orginal lamp as temporary
After connect yellow,gray wire to front-rear lamp that are conected to locomotive frame.

When .No running as stop locomotive
lamps : OK can be operated

But after running locomotive
I found that yellow,gray function are broken / zero volt==>fail
But other functions as motor ,aux were still OK

Please recommend me

Thank
thanethm11 attached the following image(s):
IMG_0165.jpg
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.394 seconds.