Feedback modules S88 interfere?

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Feedback modules S88 interfere? - Problem wit feedback modules S88 (link)

Options

View

Previous Topic Next Topic

Tjeerd		#1 Posted : 27 November 2024 16:53:14(UTC) Retweet
Joined: 27/11/2024(UTC) Posts: 1 Location: Zuid-Holland, The Hague		Problems with S88 link and CS3 Hello, does anyone recognize this problem. When shutting down the CS3 the power went out. Since then I have problems with the feedback modules. I have a CS3 with a S88 link with on bus 1 3 modules S88 and on bus 2 2 modules S 88 from marklin nr 60881. The individual S88 all work, but in conjunction it no longer works. If a feedback indicator of one module turns on then the feedback indicator of the other module goes into failure. I have reset the CS3 and cleared the s88 link and placed the S88 modules in other places. Also tested the cables swapped and partially replaced them. Nothing helps. Does anyone have a solution?


User Profile View All Posts by User View Thanks


	Wish to join the discussion?! Login to your marklin-users.net community \| Forum account or Register a new forum account. Or Connect via Facebook

JohnjeanB		#2 Posted : 27 November 2024 17:55:32(UTC) Retweet
Joined: 04/02/2011(UTC) Posts: 3,551 Location: Paris, France		Hi (a first name would be just great) Welcome to this great forum. Here a Märklinist with a CS3 (60226) a Link88 (60883) and quite a number of 60881 and a few 6088 / 60880 on bus 3. The link88 is powered by a 60360 Märklin plugged on the same outlet strip as the CS3 PSU (60101 in my case), so all is turned ON at the same time. On the CS3, you must declare the "length" of each Bus (1, 2 and 3) that is the number of 16 entries bow (M88) that you have Here is an example on my layout . You must also connect in ONE place only the 0 digital output (brown) with any but only ONE of the upside-down T on any 88 module (60883, 60881) Last, on your Link88 (60883) you must select 12 V ONLY if you deal with recent Märklin modules (60881) and 5 V otherwise Failure to connect the ground of your digital system with the ground of the 88 system will leave all the inputs in a floating state (blinking, not working) Now, this all you MUST do prior to any use. I am not sure to understand when you write " The individual S88 all work, but in conjunction it no longer works." Cheers Jean
		My layout videos latest vid marshalling yard My Layout

2 users liked this useful post by JohnjeanB		Tjeerd, marklinist5999
User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.