BR50 - 37897

Welcome Guest! To enable all features please Login or Register.

Notification

Error

BR50 - 37897 - New BR50 likes to derail?

Options

View

Previous Topic Next Topic

sailexa		#1 Posted : 27 February 2023 19:26:30(UTC) Retweet
Joined: 18/12/2016(UTC) Posts: 2 Location: Ontario		Hello Forum, I recently acquired a brand new Marklin BR50 model 37897. Beautiful model, great sound, runs very well, BUT. The leading axle (front wheel set) seems to pop off the rails very easily and shorts out the track of course. I notice that there is almost no weight (pressure) on the axle other than gravity so the wheels bounce up and out easily, and as well, the wheel flanges hit the front edge of the frame when travelling through the small radius track. I did some minor surgery to trim back the front edges of the frame, which solved the flange/frame contact issue. But it still seems to derail easy, especially through turnouts. There is a small bronze leaf spring as part of the front wheel carriage but it doesn't seem to do anything. I wonder if anyone else has experienced this or similar. Did I get a model with a small defect? Thanks. Axel

2 users liked this useful post by sailexa		marklinist5999, kimballthurlow
User Profile View All Posts by User View Thanks


	Wish to join the discussion?! Login to your marklin-users.net community \| Forum account or Register a new forum account. Or Connect via Facebook

marklinist5999		#2 Posted : 27 February 2023 19:45:31(UTC) Retweet
Joined: 10/02/2021(UTC) Posts: 3,879 Location: Michigan, Troy		I have a br 51, and don't have this problem. However, my new br 38 as of 18 months ago did. I removed the pilot truck, and spring, and adjusted the bend of the copper tabs a bit. Much. much better. The spring keeps force of the axles to the rails. Hope this helps! Be sure you put it back on correctly. It can fit both ways. usually. The slot that the screw goes through shold slide easily with the tabs above the axles.

3 users liked this useful post by marklinist5999		franciscohg, kimballthurlow, river6109
User Profile View All Posts by User View Thanks

sailexa		#3 Posted : 27 February 2023 22:35:23(UTC) Retweet
Joined: 18/12/2016(UTC) Posts: 2 Location: Ontario		Thanks Marklinist5999! I'll have a look at this.

1 user liked this useful post by sailexa		marklinist5999
User Profile View All Posts by User View Thanks

hvc		#4 Posted : 01 March 2023 10:18:24(UTC) Retweet
Joined: 03/06/2013(UTC) Posts: 431 Location: Melbourne, VIC, Australia		Originally Posted by: marklinist5999 I have a br 51, and don't have this problem. However, my new br 38 as of 18 months ago did. I removed the pilot truck, and spring, and adjusted the bend of the copper tabs a bit. Much. much better. The spring keeps force of the axles to the rails. Hope this helps! Be sure you put it back on correctly. It can fit both ways. usually. The slot that the screw goes through shold slide easily with the tabs above the axles. Yes I had the same. Bending this part a bit fixed the problem (circled in red): Herman
		- Herman


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.