42265 Insider 2022 coach set for BR06 39662

Welcome Guest! To enable all features please Login or Register.

Notification

Error

42265 Insider 2022 coach set for BR06 39662

Options

View

Previous Topic Next Topic

kimballthurlow		#1 Posted : 15 December 2022 07:45:54(UTC) Retweet
Joined: 18/03/2007(UTC) Posts: 6,764 Location: Brisbane, Australia		I received my 42265 set of coaches. Very well done too. I noted that the Catholic or Lutheran priest in my set travels 1st or 2nd class. There is a hierarchy in every form of society. The end coach is fitted with the B (bahnstrom) current slider and has LED marker lanterns at roof level. Each coach has internal lighting with partitions and seating with figures installed. An internal potentiometer can dim the lighting if required. Each coach is fitted with current conducting couplings, so while I have not tried running the consist I don't believe the order matters. However be careful - the ends of the carriage consist MUST USE A NON-CONDUCTING COUPLER!! Otherwise there is a danger that a short-circuit can occur when coupled with other rolling stock. The coach lettering (Kö = Cologne) is as follows BEHIND THE LOCOMOTIVE (with consist order marked on each coach): Pw4ü 105 102 Kö baggge car (LOCO END NON-CONDUCTING COUPLER) C4ü 16 082 Kö, (1) AB4ü 11 278 Kö, (2) 1st and 2nd class C4ü 16 083 Kö, (3) C4ü 16 080 Kö, (4) LED MARKER LAMPS for end of train - (OUTER END NON-CONDUCTING COUPLER) When I opened the box I noted that the interior of all 4 coaches had somewhow slid upwards so you could see not only the seat sides but the legs of all the inserted passengers. Upon opening up the first coach I realised how this had occurred. There is a very large weight (under the interior molding) held horizontally in place by two spigots in the car floor. The interior molding has 6 lugs which clip into the floor and at the same time holds the weight vertically against the floor. I surmise that the set has been very roughly handled somewhere between Germany and Australia. So much so that the weight has been "bounced" and unclipped the interior molding from the car floor. The box must have been dropped on one end because all the weights ended up at the same end of each car. This kept the interior molding elevated along the whole length. By opening up each car I was able to rectify this. Kimball
		HO Scale - Märklin (ep II-III and VI, C Track, digital) - 2 rail HO (Queensland Australia, UK, USA) - 3 rail OO (English Hornby Dublo) - old clockwork O gauge - Live Steam 90mm (3.1/2 inch) gauge.
		WWW
13 users liked this useful post by kimballthurlow		xxup, PJMärklin, ktsolias, foumaro, Eurobahnfan, Marklineisenbahn, Patrik, mbarreto, bph, Martti Mäntylä, dickinsonj, mrmarklin, Dave Banks
User Profile View All Posts by User View Thanks


	Wish to join the discussion?! Login to your marklin-users.net community \| Forum account or Register a new forum account. Or Connect via Facebook

JohnjeanB		#2 Posted : 15 December 2022 14:20:39(UTC) Retweet
Joined: 04/02/2011(UTC) Posts: 3,573 Location: Paris, France		Hi Kimbal I just saw this set of coaches at my dealer's (Au Pullman in Paris) and it is really splendid. If I behave nicely, Santa will bring me a 39662 (BR06) loco but not the set of coaches. I am already spoiled so no regrets. So this 42265 set is really a splendid choice. Cheers Jean
		My layout videos latest vid marshalling yard My Layout

3 users liked this useful post by JohnjeanB		Eurobahnfan, mbarreto, kimballthurlow
User Profile View All Posts by User View Thanks

rhfil		#3 Posted : 15 December 2022 14:24:56(UTC) Retweet
Joined: 05/09/2014(UTC) Posts: 684 Location: NEW HAMPSHIRE, Somersworth		I had a coach with a similar weight that kept coming loose so I fixed it more securely in place with a drop of rubber cement. If the problem persists you might try that or some similar non permanent adhesive.

1 user liked this useful post by rhfil		kimballthurlow
User Profile View All Posts by User View Thanks

Eurobahnfan		#4 Posted : 15 December 2022 16:14:35(UTC) Retweet
Joined: 09/08/2008(UTC) Posts: 431 Location: Stockton, CA		A very nice set indeed… unfortunately not in the budget this year. (I’ll just have to make do with the Era II Schuerzenwagen produced back in the 90s 😉)

2 users liked this useful post by Eurobahnfan		mbarreto, kimballthurlow
User Profile View All Posts by User View Thanks

bph		#5 Posted : 15 December 2022 20:13:48(UTC) Retweet
Joined: 04/08/2018(UTC) Posts: 1,166		Originally Posted by: kimballthurlow I received my 42265 set of coaches. Very well done too. I noted that the Catholic or Lutheran priest in my set travels 1st or 2nd class. There is a hierarchy in every form of society. I hadn't noticed the priest, nice one Originally Posted by: kimballthurlow The end coach is fitted with the B (bahnstrom) current slider and has LED marker lanterns at roof level. However be careful - the ends of the carriage consist MUST USE A NON-CONDUCTING COUPLER!! Otherwise there is a danger that a short-circuit can occur when coupled with other rolling stock. Actually, if you replace the normal coupler with current conducting coupler in the ends, nothing will happen as the NEM shaft lacs the electrical transmission element, and the connection plates are not wired up. Originally Posted by: kimballthurlow When I opened the box I noted that the interior of all 4 coaches had somewhow slid upwards so you could see not only the seat sides but the legs of all the inserted passengers. Upon opening up the first coach I realised how this had occurred. There is a very large weight (under the interior molding) held horizontally in place by two spigots in the car floor. The interior molding has 6 lugs which clip into the floor and at the same time holds the weight vertically against the floor. I surmise that the set has been very roughly handled somewhere between Germany and Australia. So much so that the weight has been "bounced" and unclipped the interior molding from the car floor. The box must have been dropped on one end because all the weights ended up at the same end of each car. This kept the interior molding elevated along the whole length. By opening up each car I was able to rectify this. Kimball It is a shame that things like that happen, makes you wonder how badly the package was handled. (my set was perfectly fine.) Perhaps it was handled by these guys? it's indeed a very nice set and the lights stay on with full brightness for approx 15 seconds after the power is cut, and then fade slowly out. The light's total consumption is approx 0,156A and the startup peak is just above 1A

3 users liked this useful post by bph		mbarreto, kimballthurlow, dickinsonj
User Profile View All Posts by User View Thanks

dickinsonj		#6 Posted : 16 December 2022 01:11:04(UTC) Retweet
Joined: 05/12/2008(UTC) Posts: 1,809 Location: Crozet, Virginia		Originally Posted by: kimballthurlow I received my 42265 set of coaches. Very well done too. Kimball Thanks for the review Kimball. I was about to start a thread to see if these are now being delivered, as there is no sign of mine yet. I have a 43256 D12 Insider coach set, which I bought to run behind my 39193 E19.1. I added lighting to them and I particularly like the Hechtwagons, although I have not yet added any passengers to those coaches. When I saw this set I was instantly in love and they will look great running behind my BR06. Marklin models are always slow getting to North America and I am really looking forward to seeing them soon. Your review makes it both easier and harder wait.
		Regards, Jim I have almost all Märklin and mostly HO, although I do have a small number of Z gauge trains! So many trains and so little time.

2 users liked this useful post by dickinsonj		mbarreto, kimballthurlow
User Profile View All Posts by User View Thanks

franciscohg		#7 Posted : 16 December 2022 02:54:01(UTC) Retweet
Joined: 10/07/2002(UTC) Posts: 3,298 Location: Patagonia		Hello Received mine last week and i am very happy with it. Nothing to add, it is just a wonderful set Regards
		German trains era I-II and selected III, era depends on the mood, mostly Maerklin but i can be heretic if needed XD, heresy is no longer an issue.. LOL

3 users liked this useful post by franciscohg		dickinsonj, kimballthurlow, mrmarklin
User Profile View All Posts by User View Thanks

kimballthurlow		#8 Posted : 16 December 2022 10:24:58(UTC) Retweet
Joined: 18/03/2007(UTC) Posts: 6,764 Location: Brisbane, Australia		Originally Posted by: bph Originally Posted by: kimballthurlow .. The box must have been dropped on one end because all the weights ended up at the same end of each car. This kept the interior molding elevated along the whole length. By opening up each car I was able to rectify this. Kimball It is a shame that things like that happen, makes you wonder how badly the package was handled. (my set was perfectly fine.) Perhaps it was handled by these guys? it's indeed a very nice set and the lights stay on with full brightness for approx 15 seconds after the power is cut, and then fade slowly out. The light's total consumption is approx 0,156A and the startup peak is just above 1A Hello bph, Yes watched the video. There is no necessity for workers to mis-treat other peoples belongings. It looks like they get to work in air-conditioning too (maybe). In my experience these are the sort of people who complain to the Human Rights Commission. Whose job is to listen and escalate it to the ultimate harrassment against the employer regardless of merit. Kimball
		HO Scale - Märklin (ep II-III and VI, C Track, digital) - 2 rail HO (Queensland Australia, UK, USA) - 3 rail OO (English Hornby Dublo) - old clockwork O gauge - Live Steam 90mm (3.1/2 inch) gauge.
		WWW
1 user liked this useful post by kimballthurlow		bph
User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.