Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline xxup  
#1 Posted : 24 April 2022 02:35:25(UTC)
xxup

Australia   
Joined: 15/03/2003(UTC)
Posts: 9,499
Location: Australia
I spotted this item on the ESU website some months ago and asked my local dealer to order me one. He grumbled a bit, because he has to buy ESU stock from the USA and the freight cost from the USA in these days of COVID is at premium rates. So I agreed to split the freight cost with him and he placed the order for me.

UserPostedImage

Yesterday, I was not feeling well so study had to take a day off and I decided to run some trains. After 5 minutes or so, I noticed that my birthday loco from a long time ago LOL was limping (not unlike me on some days). A perfect time to test out the new Premium Foam Service Tray from ESU.

As you can see from the image the major component is two foam sections. The front section is angled to allow for easy access to the side rods to change the tyres.

They are separated by a magnetic strip, which is handy when you tip over the loco to eject the holding screws.

Because it is foam, I am unlikely to do any soldering on this unit, but is is a good place to store the loco body, small parts and screws while you take the chassis off to do the soldering. I am also concerned for things like pantographs and other finicky things (like the delicate parts on Brawa locos) that will likely get caught on the foam. My thoughts are leaning toward using a tape to line the foam to prevent parts catching on the foam while maintaining the soft landing capability of the foam itself.

I am also concerned that the foam looks a little like the stuff that was used to pack Marklin locos a couple of decades ago. A search on the forum will find references to how that product deteriorated over time.

A quick review on the Internet shows this item for sale in Australian hobby stores for around A$30. In the USA, it seems to be around the US$20 mark.

More details about the product are here -> https://www.esu.eu/en/pr...foam-train-service-tray/

Value for money *
Usefulness ****
Durability ***
Adrian
UserPostedImage
Australia flag by abFlags.com
thanks 4 users liked this useful post by xxup
Offline PJMärklin  
#2 Posted : 24 April 2022 12:24:11(UTC)
PJMärklin

Australia   
Joined: 04/12/2013(UTC)
Posts: 2,224
Location: Hobart, Australia
Originally Posted by: xxup Go to Quoted Post
I spotted this item on the ESU website some months ago and asked my local dealer to order me one. He grumbled a bit, because he has to buy ESU stock from the USA and the freight cost from the USA in these days of COVID is at premium rates. So I agreed to split the freight cost with him and he placed the order for me.

Yesterday, I was not feeling well so study had to take a day off and I decided to run some trains. After 5 minutes or so, I noticed that my birthday loco from a long time ago LOL was limping (not unlike me on some days). A perfect time to test out the new Premium Foam Service Tray from ESU.

As you can see from the image the major component is two foam sections. The front section is angled to allow for easy access to the side rods to change the tyres.

They are separated by a magnetic strip, which is handy when you tip over the loco to eject the holding screws.

Because it is foam, I am unlikely to do any soldering on this unit, but is is a good place to store the loco body, small parts and screws while you take the chassis off to do the soldering. I am also concerned for things like pantographs and other finicky things (like the delicate parts on Brawa locos) that will likely get caught on the foam. My thoughts are leaning toward using a tape to line the foam to prevent parts catching on the foam while maintaining the soft landing capability of the foam itself.

I am also concerned that the foam looks a little like the stuff that was used to pack Marklin locos a couple of decades ago. A search on the forum will find references to how that product deteriorated over time.

A quick review on the Internet shows this item for sale in Australian hobby stores for around A$30. In the USA, it seems to be around the US$20 mark.

More details about the product are here -> https://www.esu.eu/en/pr...foam-train-service-tray/

Value for money *
Usefulness ****
Durability ***



Hi Adrian,BigGrin

Nice to see a modern version of this helpful aid-to-modeleisenbahners.

Yours is truely the "premium" version.

I first bought a similar foam loco cradle in the early 1980's from Mössmer (later acquired by Noch).
They also made foam roadbed but as I have previously described in posts here, over the years it
all crumbled away.
Same with the loco foam work cradle.OhMyGod

At that time no one else was selling these units so I went to the local factory that made foam bed
matresses and bought a small offcut for a couple of dollars (their asking price was nix !).
I then carved this to replicate my crumblée and even recycled the screw-saving magnetic strip.

It still remains viable today as seen in the image below (the lower is my original creation, the upper
a later supplemental piece; the crenellated lefthand edge of the lower unit is the artwork of my Cocker
Spaniel when he was a chewing pup Blushing but he still oversees the layout work.)
... (recognise the current project-at-hand, Ross ?Wink )


UserPostedImage


Such items are certainly very useful ThumpUp. I have not found the pantographs or other delicates of inverted
locos catch on the foam, but it may be softer than yours. I would be concerned that tape placed over the foam
would not yield to such delicate parts and would break them, whereas the foam submits and conforms.

Regards,

Philip Smile


thanks 2 users liked this useful post by PJMärklin
Offline PMPeter  
#3 Posted : 24 April 2022 16:19:01(UTC)
PMPeter

Canada   
Joined: 04/04/2013(UTC)
Posts: 1,284
Location: Port Moody, BC
I bought the Fohrmann Locomotive Cradle and am very happy with it, especially the little trays for the parts, bottles, etc..

Peter
Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.429 seconds.