k83 6083 decoder mounting screws

Welcome Guest! To enable all features please Login or Register.

Notification

Error

k83 6083 decoder mounting screws - hardware

Options

View

Previous Topic Next Topic

Donb		#1 Posted : 01 February 2017 01:23:11(UTC) Retweet
Joined: 03/04/2013(UTC) Posts: 289 Location: Fraser Valley		Hi all, Does anyone know the size of the k83 6083 decoder mounting screws? I have an old one, but no screws. Would be handy to know this when I go to the hardware store and try to find. Thanks, Don
		Best Regards, Don ___________________________________________________________________________________ CS3, ( Commander is now retired) , C track and Z scale, mostly DB/DR and SBB, SJ

1 user liked this useful post by Donb		Brakeman
User Profile View All Posts by User View Thanks


	Wish to join the discussion?! Login to your marklin-users.net community \| Forum account or Register a new forum account. Or Connect via Facebook

DaleSchultz		#2 Posted : 01 February 2017 15:15:18(UTC) Retweet
Joined: 10/02/2006(UTC) Posts: 3,997		consider using Velcro instead of screws. See pictures at http://cabin-layout.blog...4/08/Viessmann-5210.html I find it much easier to staple the Velcro onto the substrate and glue some Velcro on the back of the modules. It is so easy to change one out, and you can also keep the wires tidy by adding squares of Velcro.
		Dale Intellibox + own software, K-Track My current layout: https://cabin-layout.mixmox.com Arrival and Departure signs: https://remotesign.mixmox.com
		WWW BLOG
2 users liked this useful post by DaleSchultz		Donb, franciscohg
User Profile View All Posts by User View Thanks

siroljuk		#3 Posted : 01 February 2017 16:48:54(UTC) Retweet
Joined: 29/10/2010(UTC) Posts: 377		Hello Screw is Phillips PH 19.5 mm long and 2 mm thick. Originally screw is with possible to use also flat screw driver. Regards Jukka

1 user liked this useful post by siroljuk		Donb
User Profile View All Posts by User View Thanks

Hoffmann		#4 Posted : 02 February 2017 02:21:17(UTC) Retweet
Joined: 25/11/2004(UTC) Posts: 1,106 Location: Guelph, Ontario		Hi, You will not find this Screw in a local Hardware Store in Canada or the U.S.A. Take Dales advice and use the velcro. Martin
		marklin-eh

2 users liked this useful post by Hoffmann		DaleSchultz, Donb
User Profile View All Posts by User View Thanks

Donb		#5 Posted : 10 February 2017 23:33:27(UTC) Retweet
Joined: 03/04/2013(UTC) Posts: 289 Location: Fraser Valley		Originally Posted by: DaleSchultz consider using Velcro instead of screws. See pictures at http://cabin-layout.blog...4/08/Viessmann-5210.html I find it much easier to staple the Velcro onto the substrate and glue some Velcro on the back of the modules. It is so easy to change one out, and you can also keep the wires tidy by adding squares of Velcro. Hi Dale, I used self adhesive Velcro pads to mount it to the underside of my wooden train table structure. After letting it set for 24 hours, per instructions with the Velcro, the pads are very strongly attached. Now over time the adhesive may weaken and out will come the stapler, but so far so good. Thanks again for the tip! Don
		Best Regards, Don ___________________________________________________________________________________ CS3, ( Commander is now retired) , C track and Z scale, mostly DB/DR and SBB, SJ


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.