Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.



Go to last post in this topic Go to first unread post in this topic
Offline clapcott  
#1 Posted : 20 December 2016 10:17:31(UTC)

New Zealand   
Joined: 12/12/2005(UTC)
Posts: 2,187
Location: Wellington, New_Zealand

11Feb2019 v1.4.0(0)

30Jul2018 v1.3.3(1)

12Jul2018 v1.3.3(0)

22Dec2017 v1.3.2(1)

21Sep2017 v1.3.1(0)

21Apr2017 v1.3.0(0)

19Jan17 v1.2.0(5) - BETA - Captured after 2017 New Item images available


19Dec16 v1.2.0 - available for download


A Beta excerpt! Ref http://stummiforum.de/viewtopic.php?t=142974



20 debian .......xx.xx.xx......xx.xx.xx......xx.xx.xx.... 1. 2. 0 ..... <.--.---..... <.--.---..... <.--.---..... 1. 3. 2
...............xx.xx.xxxx....xx.xx.xxxx....xx.xx.xxxx....24.12.2016.... <.--.---..... <.--.---..... <.--.---.....11.10.2017

30 cleanup ....xx.xx.xx...... 1. 0. 0(0)... 1. 1. 0...... 1. 2. 0. .... <.--.--- ....1. 3. 0(0)....1. 3. 1(0).... 1. 3. 2
...............xx.xx.xxxx....22.08.2016....16.11.2016....13.12.2016.... <.--.--- ....23.03.2017....14.07.2017....22.12.2017

40 system .....xx.xx.xx...... 1. 0. 0(0)....xx.xx.xx..... 1. 2. 0 ..... <.--.--- ....1. 3. 0(0)....1. 3. 1(0).... 1. 3. 2
...............xx.xx.xxxx....23.08.2016....xx.xx.xxxx....12.12.2016.... <.--.--- ....23.03.2017....29.05.2017....08.12.2017

41 kernel ......4.5.0 #50.... <.--.--- .....4.5.0 #60.... <.--.--- .... <.--.---......<.--.---......<.--.---......<.--.---
...............15.08.2016.... <.--.--- ....15.11.2016.... <.--.--- .... <.--.--- .... <.--.--- .... <.--.--- .... <.--.---

42 webserver ...xx.xx.xx..... 1. 0. 0(0)... 1. 1. 0...... 1. 2. 0...... <.--.--- ....1. 3. 0(0)....1. 3. 1(0).... 1. 3. 2
...............xx.xx.xxxx....22.08.2016....15.11.016.... 07.12.2016.... <.--.--- ....23.03.2017....07.08.2017....08.12.2017

50 cs3-gui .....xx.xx.xx..... 1. 0. 0(0)... 1. 1. 0 ..... 1. 2. 0 .... 1. 2. 0(5)....1. 3. 0(0)....1. 3. 0(0).... 1. 3. 2

51 lokicons ....xx.xx.xx..... 1. 0. 0(0)... 1. 1. 0...... 1. 2. 0...... 1. 2. 1 ..... <.--.--- ..... 1. 3. 1 ..... 1. 3. 2
...............xx.xx.xxxx....23.08.2016....19.11.2016....18.12.2016....19.01.2017.... <.--.--- ....31.05.2017....27.11.2017

60 spielwelt ... 1. 0. 0..... <.--.--- .... <.--.--- .... <.--.--- .... <.--.---......1. 3. 0(0)... <.--.---......1. 3. 2
...............15.08.2016.... <.--.--- .... <.--.--- .... <.--.--- .... <.--.---.....23.03.2017.... <.--.--- ....22.12.2017

70 GFP V2......xx.xx.xx......xx.xx.xx...... 3.53.__...... 3.54.__ ..... <.--.--- .... 3.62.__ ..... 3.68.__ ..... <.--.---
...............xx.xx.xxxx....xx.xx.xxxx....15.11.2016....12.12.2016.... <.--.--- ....11.04.2017....24.05.2017.... <.--.---

71 gleisbox2 .. <.--.--- .... <.--.--- .... <.--.--- .... <.--.--- .... <.--.--- .... <.--.--- .... <.--.--- .... 1. 0.___

72 Adapter 6012.xx.xx.xx..... <.--.--- .... <.--.--- .... 1. 0.__ ..... <.--.---..... <.--.---..... <.--.---..... <.--.---
...............xx.xx.xxxx....xx.xx.xxxx....xx.xx.xxxx....29.11.2016.... <.--.---..... <.--.---..... <.--.---..... <.--.---

73 ms2 .........xx.xx.xx..... <.--.--- .... <.--.--- .... 2. 7.__ ..... <.--.---..... <.--.---..... <.--.---..... <.--.---
...............xx.xx.xxxx....xx.xx.xxxx....xx.xx.xxxx.... 7.12.2016.... <.--.---..... <.--.---..... <.--.---..... <.--.---

74 linkS88 .....xx.xx.xx..... <.--.--- .... <.--.--- .... 1. 0.___ .... <.--.---..... <.--.--- .... <.--.--- .... <.--.---
...............xx.xx.xxxx....xx.xx.xxxx....xx.xx.xxxx....29.11.2016.... <.--.---..... <.--.---..... <.--.---..... <.--.---

75 GFP V3 ......xx.xx.xx..... <.--.--- ....11.89.___ ....11.91.___ .... <.--.--- ....12.22.___ ....12.28.___ .... <.--.---
...............xx.xx.xxxx....xx.xx.xxxx....15.11.2016....15.12.2016.... <.--.--- ....11.04.2017....10.07.2017.... <.--.---

77 decoder .... <.--.--- ..... <.--.--- .... <.--.--- .... <.--.--- .... <.--.--- ...Pkg. 03/17.... <.--.--- .... <.--.---
...............xx.xx.xxxx....xx.xx.xxxx....xx.xx.xxxx......xx.xx.xx......xx.xx.xx....03.03.2017.... <.--.--- .... <.--.---


20 debian ..... <.--.---..... <.--.---..... <.--.---
............... <.--.---..... <.--.---..... <.--.---

30 cleanup .... 1.3.3(0)..... <.--.---..... 1.4.0(0)
...............22.06.2018.... <.--.---.....30.09.2018

40 system ..... 1.3.3(0)..... <.--.---..... 1.4.0(0)
...............22.06.2018.... <.--.---.....30.09.2018

41 kernel ..... <.--.---..... <.--.---..... <.--.---
............... <.--.---..... <.--.---..... <.--.---

42 webserver .. 1.3.3(0)..... 1.3.3(1)..... 2.0.0(0)

50 cs3-gui .... 1.3.3(0)..... 1.3.3(1)..... 1.4.0(0)

51 lokicons ... 1.3.3(0)..... <.--.---..... 1.4.0
...............22.06.2018.... <.--.---.....30.09.2018

60 spielwelt .. 1.3.3(0)..... <.--.---..... 1.4.0(0)
...............22.06.2018.... <.--.---.....30.09.2018

70 GFP V2...... <.--.---..... <.--.---..... <.--.---
............... <.--.---..... <.--.---..... <.--.---

71 gleisbox2 .. 1.00.00 ..... <.--.---..... 3.81
...............28.07.2016.... <.--.---.....21.01.2019

72 Adapter 6012 <.--.---..... <.--.---..... <.--.---
............... <.--.---..... <.--.---..... <.--.---

73 ms2 ........ <.--.---..... <.--.---..... <.--.---
............... <.--.---..... <.--.---..... <.--.---

74 linkS88 .... <.--.---..... <.--.---..... <.--.---
............... <.--.---..... <.--.---..... <.--.---

75 GFP V3 ..... <.--.---..... <.--.---..... 12.57
............... <.--.---..... <.--.---.....30.09.2018

77 decoder .... <.--.---..... <.--.---..... <.--.---
............... <.--.---..... <.--.---..... <.--.---

xx supervisor . 2.05.02 ..... <.--.---..... <.--.---
...............20.04.2017.... <.--.---..... <.--.---

Change Log

Delivery version

track plan coordination of representation with future applications allows replacement of individual programs

Error corrections
Switching problem Accessories decoder
Switching problems with accessory decoders. Switching commands were transmitted too quickly one after the other, and the switch-off command was sent shortly after the switch-on command.
Mfx Application 60174 Booster
An updated GFP for CS2 and booster improves the mfx login in the booster circuit.
Blocked GFP3 when mfx is switched off
An mfx request with the mfx-track protocol switched off could lead to a blockage of the GFP3. This has been fixed.
Switching conditions Accessories
Fixed a bug that caused them to lose their state after power up.
Manual release S88 contacts
A manual assignment of an S88 contact is forwarded correctly to other control panels.
Mfx-re-registration after configuration restores
An mfx-new registration is enforced for all mfx-subscribers after a configuration restore. Otherwise, it could happen that mfx-loks were not controllable or did not log in again.
Creation of track plans
The creation of track plans has been simplified, catching connections improved.
Sorting locomotives and magnetic articles
The unrealized sorting options for the article list and the locomotive list have been deactivated.
Articel list can be sorted by address, type and name.
The locomotive list can be sorted by Name, Type, History and V / max.
Display locomotive list
The grid of the locomotive list has been corrected, and intermediate settings have been fixed.
Faulty master - slave setting leads to unaffected surface
If the setting Master / Slave is activated and the field for the master IP address is empty, the surface is hung up. This error has been fixed.
New languages: Japanese and Greek
The translation of the texts in Japanese and Greek has been added.

Programer extensions
S88 contacts
S88 contacts are docked on a route (analogous to the signals). Existing tracks with S88 contacts are automatically adjusted.
Speed ​​control locomotives
An option in the settings of the CS3 allows fast control of the locomotives. This is switched off at the time of delivery so that the speed control does not collide with the assistants.
Configuring a locomotive
The menus for setting up a locomotive have been modified. The arrangement of the input fields is now in a more meaningful order.
Keyboard Fullscreen
A full-screen representation of the keyboard was realized.
Darkening background at menus
The inactive background is darkened when an input menu is opened.

Other locomotives have been added. The total number is now 1584 locomotives. Some prematurely released locomons were removed.
Non-operable interface according to CS2 data import
This bug has already been fixed in Hotfix V1.0.1 and is still part of the update.
The wizard shows the point for pressing.
Representation of the track plan
The representation of the track plan was coordinated and slightly modified. This can lead to the need to rework the track sketches.

track plan coordination of representation with future applications allows replacement of individual programs

Error Corrections
Write locomotives
An error occurred while handling locomotive with 32 function and writing locomotive cards.
Bugfix MS2 Update
The MS2 update now works - Updated files were included in the delivery scope.
Data import CS2
A hotfix for the CS2 import has been implemented. The cause is a deleted directory, which means that the access rights are no longer correct. Why the directory is deleted could not be determined, but the effect was fixed.
Adapter 6021 - List of locomotives
The locomotive list for adapter 6021 is sent to the device every time it is started. So far, it was sent only after editing.
Switch uncoupler
Decouplers, or momentary items, now switch correctly. Switching repeats were not sent correctly.
DCC locomotive address
Decouplers, or momentary items, now switch correctly. Switching repeats were not sent correctly.
Program extensions
Keyboard - New sorting function: Area
In the keyboard, the articles can be sorted according to the defined areas.
Security query for mfx article search
Before the start of the mfx article search, a security query was installed. This prevents an accidental interruption of the set configuration.
Interface to PC controls
The interface to PC controls has been brought to the CS2 stand. The connection can be restored analogously to CS2.

Changeover procedure for web servers
The start procedure of the web server was changed to standard Linux. The memory consumption of the process manager "PM2" can thus be consumed by the application. Triggers were customers whose extensive configurations caused a memory overflow.
Copyright rights for all applications
A note on legal use was included in each program.

1.3 Beta
extensions in the automation area

S88 Status after reboot
The status after restarting is first updated from the database and the status of the system is read.
Time function for locomotive functions
This feature has been re-programmed analogously to the CS2.
Interface PC control programs
The broadcast interface was simulated analogously to the CS2. This should restore the PC control programs
Double dialog caused crashes
Through various actions, dialogs could be opened twice, resulting in a GUI crash
Magent articulation on a connected MS2
The current magnetic article position is now displayed on a MS2.
Double-tap on loco function
Double-tap on loco function permanently changed the status.
Locals with special characters
Locals can now contain a small selection of urgently needed special characters.
Number of DCC locomotives
The number of DCC locomotives is now adjustable and is also used during control.

1.3 : 1.3.0(0)
Content of the update V 1.3
Error corrections of known and localized errors
Some necessary extensions, so that reported errors could be repaired
New Leaders
Supports the decoder tool

Display of the console at stop
- In the Stop state, the directional arrows are also displayed in red.
Adapter 6021-60128
- Fixed an error while sending the inital configuration. The data is now sent correctly every time you restart.
S88 Status after reboot
- The status after restarting is first updated from the database and the status of the system is read. The execution of events up to the end of the process is prevented. Contacts with status "unknown" (red) are marked until the end of the reading. The process is indicated by a progress indicator.
Link-S88 Config after restart
- An error which prevented the link S88 from getting the required setting values ​​at system start has been fixed. The settings are now sent to the device and subsequently the current status of the contacts is read.
- The same happens when a Link-S88 is subsequently started.
Execution stop of automatics during the S88 status read-in
- As long as the status of the S88 contacts is read, the execution of automatic functions is inhibited. This is indicated in the automatic menu. If an attempt is made to activate the automatics in this state, a corresponding message is output.
Automatic start-up of locomotives
- Automatic start-up of locomotives is now also indicated by a progress indicator. A termination of the start-up is no longer indicated by a message.
Canceling an event using an S88 contact
- The designation of whether an event was aborted or continued was incompatible with the realization of the CS2. Now this is uniform to CS2.
Identification action of an S88 contact
- An indication of whether an S88 contact is waiting or aborted has been added.
Time function for locomotive functions
- This feature has been re-programmed analogously to the CS2.
Interface PC control programs
- The broadcast interface was simulated analogously to the CS2. This should restore the PC control programs.
Crash by double dialog
- Through various actions, dialogs could be opened twice, resulting in a GUI crash.
Crash when inserting track building articles
- Repeated insertion of track construction articles could lead to a crash. As a result, this crash could lead to an empty track. The error has been cleared.
Crash SLAVE GUI through game world locomotives in the ad
- A slave GUI could have problems starting when both left and right the same locomotive with activated game world was in the controller. This error has been fixed.
Crash GUI at mfx logon while active game leader
- The GUI crashed when an mfx application was terminated and you were at the same time in the game world leader. This bug has been fixed.
Magnetic article position on a connected MS2
- The current magnetic article position is now displayed correctly on a MS2.
Double-tap on loco function
- Double-tap on loco function permanently changed the status.
Locals with special characters
- Locals can now contain a small selection of urgently needed special characters. "", "", "", "", "", "", "" .
Magnetic articles with special characters
- Magnetic articles may now also contain a small selection of urgently needed special characters. They are the same as the locomotives.
Delete articles / locomotives with special characters
- The deletion of articles / locomotives with special characters was not completely possible. Elements with question marks were inserted on the layout and could not be deleted. This has been fixed in the course of introducing special characters.
Creating articles
- When creating articles, the selection window remains open and had to be closed separately. This will now be closed correctly.
New mfx articles m83 (60832) and m84 (60842)
- The support for the new mfx-compatible accessories has been added. The DCC CVs in the template for m83 and m84 have been extended.
Editing mfx accessories
- The CV descriptions for the entries have been revised and expanded.
Specification of entries when creating articles
- When prescribing addresses and names of articles, reasonable assumptions are now proposed, if this is recognizable. This makes the creation of articles faster and easier.
Number of DCC locomotives
- The number of digits of DCC locomotives is now adjustable and is used during control.
Move windows
- Moving windows is now more fluid. The package updater has also been revised. The side effect that the windows are now partially unfavorable will be fixed in V1.4.
CS2 data import
- When importing the memory configuration of the CS2, the CS2 contacts are no longer imported as control contacts. These are now assigned to the device with the acknowledgment 1.
Setting up mfx functions.
-When setting up mfx functions, the wrong values ​​were written to the decoder. That was corrected.
Setting and sorting by type of locomotive
-When locomotives are created manually, the type of locomotive can be assigned. This allows the locomotives to be sorted by type.
Circuit repetition
- For torque and duration articles, a circuit repeat is now sent correctly.
- The texts are now translated in the mfx configuration. Some translations have yet to be submitted.
Disappear entries from events
- A cause was localized: deleting duplicates immediately deletes the entry in the events. A change that causes the event item to be automatically deleted after deleting the last item with this address will trigger the accidental disappearance of items.
New game world championship
- New worlds of games have been added:
- - Tower truck with stage control
- - Railbus
- - Re 4/4 I
- - Modern Diesellok
- - Old building Diesel locomotive eg V140 / V16, V188
- - Ae 8/14
- - Diesel quick-action trains VT08, VT11
- - F7
- - BR 628
- - BR 103
Display gameslokloks consumption menu on the right
- If the consumption value menu of a game worldlok was called up on the right-hand control, this has been displayed outside the screen. This has been corrected and is now visible.
Operation Game-world brake by means of rotary knob
- The operation of the brake in the world of the game world is more sensitive.
Zoom track image
- The zooming of the track image was accelerated.
Address display adapter 6021
- When displaying the assigned locomotives to an adapter 6021, the address that is to be entered on the 6021 is now displayed in the address field. There are things
Mfx - editing with active game world locomotives
- An error that has interrupted the reading of mfx-CVs in the event of a failed read-out of consumption values ​​has been fixed.
Create Motorola locomotives from the database
- When creating locomotives from the database, locomotives could be created with a time function. The active times, however, were incorrectly deflected in the locomotive - which in part led to quite confusing phenomena. In part, the appearance is that functions are deactivated again by themselves - since the times could also be quite large.

Support decoder tool
- Added support for Märklin Decoder Tool.
Decoderupdate with the CS3
- A decoder update with the CS3 was implemented.
Restart Web Server after package update
-After a package update, the web server is restarted.
New locomotives
-The locomotives of the new 2017 and other LGB icons have been added.

Alphatest phase
Extensions Events
In the test are extensions to events. These are preliminary and will not be included in the release.

This includes:
Setting the status of S88 contacts.
Accessories and locomotive control as conditions for waiting or canceling.

1.3.1 : 1.3.1(0)

Content of the update V 1.3.1(0)
Miscellaneous and Troubleshooting

Bug fixes
S88 devices
- If the S88 devices are missing, the name of the devices that are still open is output.
Status display Stop button at system start / restart
- For the illumination of the stop button only the feedback of the master GFP is used. Thus, the status is consistent with the track.
- Further texts were translated during mfx-CV processing.
Performance bottle neck
- A message flow could cause steps in an event to fail. This flood of messages has been removed.
Displays the pause time for items in events
- The rest periods were always shown in seconds. Entering times less than 1 second did not display them. Break times are now displayed correctly.
Animations of ads
- Animated ads were temporarily suspended due to high CPU load.
Events on locomotive functions / truncation functions
- An error has been fixed which causes locomotives with special characters in the name to not execute events on the locomotive functions. The handling of the special characters at this point was missing - the locomotive could not be assigned.
Events Edit
- In the Edit Events mode, a long press has always been active. This allows you to delete multiple elements or move elements within the event. For this to be operable, the long press time was set to 500 ms.

Program enhancements
Turntable treatment revised
- The illustration of the turntable in the CS3 has been extended and revised. It now has 2 operating modes: position-controlled (without programming of the turntable decoder) and connection controlled (by means of a programmed turntable decoder).
New turntable mode: position-controlled.
- In this mode, an unrecorded turntable decoder is required. The turntable is drawn in the track and the tracks connected there are approached. The step button activates the next connected track. Operation of the turntable by means of position selection of the stage is directly possible. When direct operation of the stage, the direction of rotation is adjusted to the operation.
Existing turntable mode: connection controlled
- In this mode, a turntable decoder is required. In order to be able to set this up, the "programming" tab of the turntable has been adapted to this requirement. The turntable decoder is responsible only for the desired positions. The user has the task of setting up the turntable to match the design and layout in the layout and to match the three areas.
Setting up the turntable
- The "Programming" tab of the request has been adapted to set up the turntable. In this tab, two tasks were resolved: Position 1 Correction and setup of the turntable decoder. By selecting the appropriate functionality, the turntable decoder is set to the appropriate mode and the user can manually complete the process.
Setting up the turntable: Determine the connections
- The connections to the turntable are determined by the track layout. When drawing the connecting lines, the active connections are determined. Connections without connecting rails are not approached in position-controlled mode. In the terminal controlled mode, the connections shown determine which tracks are approached and which position they have.
Help the turntable
- A new help function and help pages were created for the turntable.
Warehouse locomotives
- One possibility was to keep Lokicons in subdirectories and to nest exactly one level deep. This extension is also valid for the SD card.
Search in the locomotives
- The output field for displaying the search mask can now also be used for input.
- Sections in CV processing can now be expanded / expanded. The list becomes much clearer.
MFX-CV processing: Function symbol assignment
- A function icon can also be assigned to the function during the processing of the functions. You do not have to leave the dialog for this task anymore and do this when setting up.
New feedback types
- S88-type pressure switches and rotary switches have been added. This allows the functions of the S88 contacts to be displayed better.
Pictures for events
- Added new images for events. For this purpose a separate directory was added: pics. In the course of this, the presentation of the events was also slightly changed.
Sort events
- Events can now be sorted by the assigned image. The image can thus become a sorting criterion.
Sorting locomotives
- new mfx locomotives now appear first in the locomotive list - regardless of the selected sort.
Help pages
- Numerous help topics have been added to various topics. These are listed in the "System" area and can be called up there.
Webserver Collaboration with Firefox
- Fixed a bug when working with Firefox when viewing the locomotives.
Number joystick box
- The input limits for the numbering console have been corrected.

1.3.2 : 1.3.2(1)

Content of the update V 1.3.2(1)
- Lighter operation of the CS3 (Optimised)
- Bug fixes

Bug fixes
Central ABV
- The calculation of the central ABV is ended when the direction changes
Initial query of CS2 contacts after CS2 system restart
- The S88 contact query of a CS2 may fail on the first try. If this happens, the process is reported and repeated.
Current events cause slow operation
- The cause was the animation of the process. This has been optimized.
Value range for MM2 variables
- The value range for MM2 variables was limited to 79. There was no reason for that. The restriction has been removed.
CV editing
- Fixed some errors and blockages in CV editing.
Start query S88 contacts
-If there are no real S88.contacts in the keyboard, the red line in the keyboard will not be drawn anymore. The cause was a missing database information about the progress of the query.
MS2: Takeover of Loks from the CS3
- An error has been fixed which resulted in an incompatible locomotive list to the MS2. Background was a missing status info to the affected locomotives. Once this was not present, the locomotive was missing in the MS2 list.
Lok function editor: Moment property of a function
- When setting the torque function, this property is also written in the decoder
Format conversion of track image files
- Track image files in old formats were not converted during loading. This bug is now fixed and old formats are changed into current ones.
Initial S88 status query of contacts to CS2
- When starting the CS2, it may happen that this ignores the reading of the S88 contacts. If this happens, the CS3 tries again.
mfx processing of functions greater than F16
- An error has been fixed that prevented the execution of functions greater than 16 in mfx CV editing.
Assignment of articles to multiple decoders
- An error has been fixed where an erroneous assignment to a multiple decoder resulted in a crash.

Program enhancements
Lighter operation (Optimised)
- The internal structure has been changed to allow a smoother operation. In this course, some display errors were corrected. Screen-filling dialogues are no longer movable.
Faster presentation of articles
- For faster drawing of articles are now drawn not by SVG image but by code contained in the program. This brings an increase in presentation speed.
Synchronization Article address for mfx articles
- If the address of mfx articles is changed, it will now be synchronized with the device (if possible).
Creation of decouplers
- The creation of uncouplers has been simplified and is now possible on both outlets of one connection.
Reporting error conditions on the Märklin bus
- If too many communication errors are reported by the CAN bus, the user is informed.
Report errors of internal memory
- If problems occur during operation of the FLASH memory, the user is informed.
Report memory problems
- If a file can no longer be saved (for example due to memory becoming too full), the user will be informed.
User error logging
- User logging has been implemented to support users and search for errors. The result of the logging helps the development to locate errors.
Locked track logs
- Locked track logs are now being considered in the CS3. If the user executes a function for a blocked track protocol (mm2, mfx or dcc), this will be reported and will not block the CS3. If the functionality is to be carried out, the user must first change the track protocol setting in the system settings and repeat the procedure.
Article list: redraw
- The article list is only redrawn if the changed element is visible.
CV processing with blocked track logs
- If CV processing is not possible due to a blocked track protocol, this will be reported to the user. Furthermore, this was one of the causes of blockage in CV processing.
- When creating the backup, the additionally loaded Lokicons are now also saved.
New function icons for locomotive functions
- The number of locomotive functions has been expanded. 54 new locomotives were added for many different purposes. Respect for compatibility with CS2 and MS2, this will be communicated with a compatible one.
Article number search when assigning locomotives manually
- In the file dialog for searching for locomotives, you can now search for an article number by entering the corresponding Märklin article number in the search field. The resolution follows the same system as when logging on mfx locomotives.
Current locomotives
- The current locomotives have been added.
Approach locomotives automatically
- The execution speed of the function "Locomotive automatic start" has been increased and adapted to the speed of the S88 contacts.

1.3.3 : 1.3.3(0)

Content of the update V 1.3.3(0)
- Extensions Events
- Miscellaneous and Bugfixing
- WEB application to control the CS3

Bug fixes
Due to older configurations, turntables could cause a crash during configuration. This is fixed (cause was that the turntable in the configuration was wrongly assigned to a multiple decoder).
Some unmarked digits in the track configuration area will now be translated correctly.
Bug fix in events
If a variable was set at the end of an event, an immediately following evaluation of the variable failed. This has been corrected.
Missing update connoisseur
The update ID for a pending update for the CS3 may not be displayed under certain circumstances. This bug has been fixed, pending updates of stick or network will be displayed.
Wrong representation of the light signal HP02
The display of the light signal HP02 in the article list and the track image has been corrected. When switching to faster display, the wrong signal image was drawn.
If a locomotive was changed, its affiliation to traction could be lost. This is fixed.

Program enhancements
events view
When viewing the events, you can now display the content of called events. This gives you a much better overview of the interrelations of nested events and helps you to find fault conditions faster.
Grouping of events
An event can be assigned an "automation group", after which the view of the events can be filtered. Thus, groups of events that control a contiguous flow can be summarized and collected.
Cancellation of events
For events, starting new events has been blocked until now. Now it is also possible to stop current events or to stop the flow of events.
Locally related events
If another event with locomotive commands is called in an event with locomotive commands, this locomotive reference is passed on to the called event and executed to obtain the current locomotive.
New triggers and actions in events
In events, additional system-relevant actions can be triggered and thus respond to unexpected events of the system. Actions are: Stop and stop events. Triggers are: CS3 Startup, Go and Events Go.
Control of the extended capabilities of the events
The extended possibilities of the events can be released in the control panel. These can now be used in a manageable version with limited possibilities or in the extended version. The possibilities of the extended variant can lead to quite complex configurations. Since this can also complicate the operation of the CS3 considerably this way was chosen. The easy operation of the CS3 for the beginner must be ensured.
New S88 Magnetic Icons
new S88 representations have been added for the Extended Abilities of events.
Loco list: new sorting
The locomotive list can now also be sorted according to the addresses of the locomotives. The order of the control protocols is fixed MM2, mfx and DCC

1.4.0 : 1.4.0(0)

Content of the update
Extensions Events
Miscellaneous and Bugfix

Bug fixes
Representation number 7 in the numbering console
The number 7 had a white border. The presentation has been corrected and adapted to the other figures.
Correct sequence of switching sequences
It could happen that circuits are sent overlapping to the GFP. Switching sequences are now sequenced and sent correctly to the GFP.
DCC Read the address of a decoder
The reading out of the address of a decoder has again been made functional. Changes in the mfx logon prevented the automatic readout of DCC locos.
Demand when writing DCC CV templates
When writing the CV template values, a demand ensures that this is also desired. The background is that users have searched for a CV Write button and used the template values ​​write button. The settings made were reset to standard and canceled settings made.
Delete input field for alphanumeric entries
The tedious deletion of individual letters by Backspace is now supported by a deletion function of the entire input field.
Change Software ABV: Reduction on Motorola locos
A software ABV takes place only for Motorola locomotives. DCC locomotives and mfx locomotives are controlled without software ABV. mfx locomotives have been controlled for a long time without ABV, now also with DCC locomotives a direct control.
Display errors were corrected in the speed display.

Program enhancements
Events: Introduce macros to execute events.
The events have been extended to include macro functions. AND, OR, IF, LOOP, BRAKE and RANDOM
Events: Extension of a locomotive display function in the track diagram.
For the elements of an event, you can specify in the action whether the article should be displayed or the tracked image should be displayed in the controlled locomotive. This can be a position indicator of a locomotive realize.
Events: Resume operation after a reboot.
When the vehicle is stopped, the system is shut down in a controlled manner and the status of the events is saved. When the CS3 is switched on, the status is restored and the driving continues.
System: Brightness of stop button at stop
The brightness of the stop button is set with the brightness of the screen.
Encoder: Dynamization
The evaluation of the encoders has been extended in such a way that all speed steps can be achieved and the encoders dynamized.
Speed ​​display: Switch between km / h, percentage and gear.
The display of the speed can now be changed.
- Percentage
display : To enter a percentage value, enter the value 10 in the maximum value of the tachometer.
This is indicated by a following percent sign after the set value.
- Speed ​​step
display To indicate the speed step, enter the speed step number of the decoder in the Tcho.
For mfx locomotives this equals 126, for Motorola the value 14
For DCC locomotives, the set value must be set under Speed ​​levels.
- Km Display
All other values in the speedometer display the kilometer value.

Game world guide for all locomotives
The game world guide can now be used for non game world locomotives. Since the decoders of these locomotives do not carry out a consumption calculation, this is deactivated.
track layouts
When creating the track images, a grid can be set to facilitate placement. Useful values ​​for the grid may be:
Horizontal 12, Vertical 7
Horizontal 60, Vertical 35
Horizontal 120, Vertical 70

Horizontal 19, Vertical 11
Horizontal 33, Vertical 19
Horizontal 53, Vertical 30
Horizontal 97, Vertical 56
Horizontal 104, Vertical 60
Horizontal 118 , Vertical 68
The grid is calculated on the basis of the used turnout angle of 30 °. The turn of the turnouts should be done in this grid. And also depends on the desired parallel spacing in the track layout.

Edit a track layout configuration
Editing a configuration of different devices is now prohibited.
Support for MS2 with 32 functions
Support for the MS2 with 32 functions has been extended.
Additional speedometer: Round speedometer
Another possibility for displaying a round speedometer was realized. After the presentation with 4 function columns and before the representation of the game world driving stand the round speedometer can be raised. The display of 2 round tachos is possible.
New game world guide booths
New game world rides have been added:
Update Lokicons
The novelties were supplemented. 2018 locomotives

Changes CFP 3 - V12.50 / V12.53
Error correction DCC Bit Write
DCC Bit Write is now correctly confirmed to the GUI.
New functionality: readout mfx NAZ
A set NAZ can now be read out of the master GFP.
Improved CAN buffer
The CAN message buffer has been revised. CAN messages should not be lost anymore.
MM2 address recognition
The detection of MM2 addresses has been improved. This is now looking more closely for the reaction of a locomotive
Revision of the Lok Halt command
The Lok Halt command has been extended. Lok Halt now transmits speed 0 to all locomotives without destroying the stored speed levels. With a GO, the stored gear levels are sent back to the locomotives.
Changes WEB application
Browsing the help
In the web application it is possible to browse the help of the CS3. Due to the much larger display area, a more comfortable reading of the help is possible.
Video surveillance of the system
The CS3 is able to realize a livestream monitoring of the train operation by means of USB cameras or IP cameras. The presentation takes place on the WEB-Browser. Due to the high computing load of the CS3, the number of USB cameras is limited to one active, several cameras can be connected. IP cameras can be used more than one, because they do not burden the CS3 to the same extent.
Changes MS2
32 functions
The MS2 and GB2 can now switch 32 functions under mfx
mfx CV processing
The most important mfx CVs can now be edited with the MS2.
Multi-device operation
Multi-device operation with the MS2 terminal has been stabilized.
Update track box 2
Switching of 32 functions was realized.

Edited by user 11 February 2019 13:12:13(UTC)  | Reason: 1.4.0(0)

thanks 11 users liked this useful post by clapcott
Offline clapcott  
#2 Posted : 21 April 2017 22:05:35(UTC)

New Zealand   
Joined: 12/12/2005(UTC)
Posts: 2,187
Location: Wellington, New_Zealand
v1.3.0(0) - see top post - Sub module summary and v1.3 Change Log

The 03/03/17 reference to decoder updates has been validated to mean up to v3.0.1.6
i.e. not the v3.0.1.8 level available via a recent CS2 update and the mDT

Edited by user 23 April 2017 07:00:42(UTC)  | Reason: Decoder crossreference

thanks 3 users liked this useful post by clapcott
Offline clapcott  
#3 Posted : 21 September 2017 08:06:51(UTC)

New Zealand   
Joined: 12/12/2005(UTC)
Posts: 2,187
Location: Wellington, New_Zealand
v1.3.1(0) - see top post

no accompaning ChangeLog

GFP2 catching up with CS2
LokIcons still back to May.

The Marklin update site has the 265MB file to download but there is no sign of the link to the document that appeared last week.
The document itself still exists without the link and can be found at ...
Offline Sankch  
#4 Posted : 22 September 2017 09:00:05(UTC)

Joined: 12/10/2009(UTC)
Posts: 53
Location: ,
Hi Everyone,

Not sure to understand fully but the update v1.3.1 is only available via the website->download on computer-> copy to usb key?

I checked yesterday on my CS3+ and there was no update available ?!

here is the link to the document : https://www.maerklin.de/fileadmin/media/produkte/Neuheiten/pdfs/update_1_3_1_info-de.pdf

Have a nice day

thanks 1 user liked this useful post by Sankch
Offline Sankch  
#5 Posted : 22 September 2017 13:27:39(UTC)

Joined: 12/10/2009(UTC)
Posts: 53
Location: ,
Update is now online throught the CS3, so no need to use the USB.

Enjoy your weekend.

Offline clapcott  
#6 Posted : 15 October 2017 12:13:43(UTC)

New Zealand   
Joined: 12/12/2005(UTC)
Posts: 2,187
Location: Wellington, New_Zealand
FYI : Belated update to ChangeLog for 1.3.1(0) added to the end of the first post
Offline Michael Jervis  
#7 Posted : 17 October 2017 19:18:08(UTC)
Michael Jervis

Joined: 14/10/2017(UTC)
Posts: 18
Am I the only one who has no idea what this all means? I joined the ranks of CS3 users thinking that by paying three times as much as for a Dynamis Ultima I would get something better. I didn’t. It’s unfriendly and, in some important features, does not even work.
Offline clapcott  
#8 Posted : 30 December 2017 10:24:52(UTC)

New Zealand   
Joined: 12/12/2005(UTC)
Posts: 2,187
Location: Wellington, New_Zealand
For the record,
- Post#1 updated with sub-module versions associated with CS3 v1.3.2(1) package update
- ChangeLog is a googly translation
thanks 1 user liked this useful post by clapcott
Offline clapcott  
#9 Posted : 11 February 2019 12:22:32(UTC)

New Zealand   
Joined: 12/12/2005(UTC)
Posts: 2,187
Location: Wellington, New_Zealand
For the record,
- Post#1 updated with sub-module versions associated with CS3 v1.4.0(0) package update
- ChangeLog is a googly translation

NOTE: while ther is a reference to the MS2 having an update, this is not evident with this release (still 2.7)
thanks 1 user liked this useful post by clapcott
Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2019, Yet Another Forum.NET
This page was generated in 3.597 seconds.