Shuttle routes with the new 60214

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Shuttle routes with the new 60214

Options

View

Previous Topic Next Topic

loegerk		#1 Posted : 25 July 2011 02:54:52(UTC) Retweet
Joined: 25/07/2011(UTC) Posts: 2 Location: SF Ca		I have been running a marklin layout with the old keyboard, memory setup and then was introduced to the ne 60214 central station that was supposed to make life easy :0 The reason I broke the bank and bought this set up was so I could run shuttle routes due to the fact my layout is small. The setup I saw while visiting Germany was a straight three track layout that was a dead end on each end. The trains would run from each station on both ends stop for a few seconds and change direction and run to the other end. I was told i needed contact tracks at each end of the run an S88 but was sold a viessmann 5217 which is suppose to be the same and four contact tracts and the 60214 central station but I can not figure out how to wire and program this to make it work Can anyone HELP me. ]My name is Keith Edited by user 26 July 2011 08:49:52(UTC) \| Reason: Not specified


User Profile View All Posts by User View Thanks


	Wish to join the discussion?! Login to your marklin-users.net community \| Forum account or Register a new forum account. Or Connect via Facebook

RayF		#2 Posted : 25 July 2011 08:25:15(UTC) Retweet
Joined: 14/03/2005(UTC) Posts: 15,840 Location: Gibraltar, Europe		Hi, welcome to the forum. I'm sure one of the many knowledgeable people here will be able to help you. Would you like to share your name with us? edit: Thanks Keith! Edited by user 27 July 2011 14:01:59(UTC) \| Reason: Not specified
		Ray Mostly Marklin.Selection of different eras and European railways Small C track layout, control by MS2, 100+ trains but run 4-5 at a time.

1 user liked this useful post by RayF		loegerk
User Profile View All Posts by User View Thanks

river6109		#3 Posted : 25 July 2011 10:39:30(UTC) Retweet
Joined: 22/01/2009(UTC) Posts: 14,728 Location: On 1965 Märklin Boulevard just around from Roco Square		Hi, also welcome to the forum.
		https://www.youtube.com/river6109 https://www.youtube.com/6109river 5 years in Destruction mode 50 years in Repairing mode
		WWW
1 user liked this useful post by river6109		loegerk
User Profile View All Posts by User View Thanks

supermoee		#4 Posted : 27 July 2011 13:57:23(UTC) Retweet
Joined: 31/05/2007(UTC) Posts: 534		Hello Keith, the wiring can be done as shown in the manual of your Viessmann decoder. The contact track should be done in the way that it is permanently closed when the train stops on it. the programming you can do like shown in the CS manual. Enter the loco setup menu, chose the shuttle button, insert the numbers of S88 contact for the start, end and middle station, enter the stopping time delay and go for it. welcome to the forum rgds Stephan


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.