Joined: 03/01/2003(UTC) Posts: 5,181 Location: Southern New Jersey, USA
|
I love the 39100 Senator set, however when I got and installed the additional cars, I found that it had some problems pulling the train up some of my inclines, particularly if they were curved. I took the motor unit off and examined it. I found that it has four driven wheels but only two had traction tire. Upon closer examination, I discovered that the other two driven wheels had the grooves cut in them for tires, but no tires installed. I added the two tires and it will now pull up any grade without any hesitation. Has anyone else noticed this? |
|
|
|
|
Joined: 09/01/2007(UTC) Posts: 589 Location: The Netherlands
|
Are you sure the traction tyres from the 2 'empty' wheels are not lying somewhere on the layout? It happens every now and then that traction tires run off or break. <s>You could also check in the catalogue or exploded view (if it's there on M* site) how many traction tires your Senator should have.</s> <<edit: there are no indications about the number of 'haftreifen' in either catalogue or exploded view>> If there are grooves, I'm sure those wheels should have traction tires (grooved wheels without traction tires run very bad). Regards, Henk. |
C and M track; CS1R and 2 MS |
|
|
|
Joined: 03/01/2003(UTC) Posts: 5,181 Location: Southern New Jersey, USA
|
Henk:
That was my first thought. However in disassembling the front assembly, I could see no way for the tires to come off without breaking. Also, it would be unlikely that two from the same axle would have come off. I was just wondering if they were left off mine or it eas intentional, and if anyone else who as this model has noticed (or would look).
|
|
|
|
|
Joined: 19/03/2004(UTC) Posts: 976 Location: Gorizia, Italy
|
I have the 39100 Senator set and I have not operated it yet (very strange indeed!). I will have a look and report to you about the number of traction tires installed.
Renato
|
|
|
|
Joined: 08/06/2002(UTC) Posts: 1,843 Location: Norway
|
The manual for the 39100 model says traction tyres # 7154. My set has 4 x traction tyres installed from factory as I have only done a test run  |
Pål Paulsen Märklin Spur 1 Digital, epoche 3 |
|
|
|
Joined: 03/01/2003(UTC) Posts: 5,181 Location: Southern New Jersey, USA
|
Thanks, Pål. I guess it was just an oversight. Not a big problem. I installed two 7154's on it and it is fine. I was just curious as to whether mine was just missed or it was a production decision. |
|
|
|
|
Joined: 19/03/2004(UTC) Posts: 976 Location: Gorizia, Italy
|
Hi Ron,
As promised yesterday I have just had a look at my 39100 Senator set and now I can confirm that a total of 4 traction tires are installed.
Have a very good run with this beautiful model after the replacement of the 2 missing traction tires.
Renato
|
|
|
|
Joined: 03/01/2003(UTC) Posts: 5,181 Location: Southern New Jersey, USA
|
It is running great, thanks. It is really a nice product. |
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.