marklin-users.net community | Forum

 
Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
LGB Loco confused by DCC programming attempt - It runs in DC but not DCC despite having an mfx/DCC decoder
Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Previous Topic Next Topic
Offline Miamistax  
#1 Posted : 29 May 2025 01:10:46(UTC)
Retweet
Miamistax

United States   
Joined: 29/05/2025(UTC)
Posts: 4
Location: Florida, Miami
I just bought a new LGB 20494 P42 Diesel Locomotive which has mfx/DCC pre-installed. Since i have several locomotives, the first thing I did was put it on my DCC programming track to change its address from 3 to 108. The loco flashed its headlights during the write and flashed again during the read where my controller's display indicated the change had taken effect. Except when I put it on the main track, it completely ignores the DCC throttle and all function buttons. And it runs perfectly in DC.

I tried programming it with an address of 9 to try a low number and also with 3 to try to put it back the way it was in the box. Nothing worked.

Am I supposed to press some particular function button to "wake it up"? Is there some special trick to programming it with a DCC controller? Or do I need to find an mfx controller to program it?
Back to top
thanks 1 user liked this useful post by Miamistax

Wish to join the discussion?! Login to your marklin-users.net community | Forum accountor Register a new forum account. Or Connect via Facebook  
Back to top  
Offline marklinist5999  
#2 Posted : 29 May 2025 10:25:28(UTC)
Retweet
marklinist5999

United States   
Joined: 10/02/2021(UTC)
Posts: 3,931
Location: Michigan, Troy
Yes, it needs to be reset.
Back to top
Offline rhfil  
#3 Posted : 29 May 2025 16:30:02(UTC)
Retweet
rhfil

United States   
Joined: 05/09/2014(UTC)
Posts: 679
Location: NEW HAMPSHIRE, Somersworth
What are you using for a controller?
Back to top
thanks 1 user liked this useful post by rhfil
Offline Miamistax  
#4 Posted : 30 May 2025 02:01:25(UTC)
Retweet
Miamistax

United States   
Joined: 29/05/2025(UTC)
Posts: 4
Location: Florida, Miami
rhfil Thanks. CV8 = 8 doesn't seem to work. Does it want a different CV setting to reset it?

marklinist5999 I'm using the ESU CabControl to run the trains outside, but I generally do the programming with a Digitrax DCS 52 because it has a nice screen that handles CV 1, 17, 18 and 29 all at the same time. I read somewhere after trying to program a new address that the trick with mfs/dcc is to run the loco with DCC first with the default settings and then mess with the CVs.
Back to top
thanks 1 user liked this useful post by Miamistax
Offline marklinist5999  
#5 Posted : 30 May 2025 12:53:44(UTC)
Retweet
marklinist5999

United States   
Joined: 10/02/2021(UTC)
Posts: 3,931
Location: Michigan, Troy
Ok, I'm not familiar with using ESU controllers. There can be difficulty when trying to adjust CVs on mfx decoders. Marklin owns LGB and perhaps a CS 3 could disable mfx and set it up for dcc only. Digitrax as far as I know is not compatible with mfx decoders.
They may use railcom or another digital encoding. Mfx doesn't. You may be able to run the loco., but you won't be able to get every function.
Back to top
Offline Miamistax  
#6 Posted : 30 May 2025 18:38:46(UTC)
Retweet
Miamistax

United States   
Joined: 29/05/2025(UTC)
Posts: 4
Location: Florida, Miami
Originally Posted by: marklinist5999 Go to Quoted Post
Ok, I'm not familiar with using ESU controllers. There can be difficulty when trying to adjust CVs on mfx decoders. Marklin owns LGB and perhaps a CS 3 could disable mfx and set it up for dcc only. Digitrax as far as I know is not compatible with mfx decoders.
They may use railcom or another digital encoding. Mfx doesn't. You may be able to run the loco., but you won't be able to get every function.


At this point, I'm willing to try to reset its decoder, but the traditional writing 8 to CV 8 doesn't seem to work. Do you know which CV(s) and number(s) to use to reset it to factory conditions?
Back to top
thanks 1 user liked this useful post by Miamistax
Offline marklinist5999  
#7 Posted : 30 May 2025 21:57:46(UTC)
Retweet
marklinist5999

United States   
Joined: 10/02/2021(UTC)
Posts: 3,931
Location: Michigan, Troy
No, sorry I don't. I only run ho scale.
Back to top
Offline Miamistax  
#8 Posted : 02 June 2025 23:53:27(UTC)
Retweet
Miamistax

United States   
Joined: 29/05/2025(UTC)
Posts: 4
Location: Florida, Miami
I kept sending 8 to CV 8 about four times and miraculously the loco now responds to DCC commands on address 3. And I'm going to leave it there.
Back to top
thanks 1 user liked this useful post by Miamistax
Offline marklinist5999  
#9 Posted : 03 June 2025 00:17:33(UTC)
Retweet
marklinist5999

United States   
Joined: 10/02/2021(UTC)
Posts: 3,931
Location: Michigan, Troy
Oh 👍 good 😊 03 is the dcc factory default address.
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET
This page was generated in 0.429 seconds.