Dear all,

I wonder if anyone of you know about using JMRI 5.8 via USB Arduino with CAN-HAT via Märklin 60116 on one side and Mobile Station 60657 on the other side. I configured it using CC-Schnitte 2.1. This works fine with Desktop Station https://desktopstation.net/railuino.html) but not yet via JMRI.



In the left bottom two messages are displayed:

No service mode programmer available

No operations mode programmer available

Do I need to fix this first and how do I do this?

Two more questions:

In DecoderPro the Power button says: Layout Power State unknown. Click to turn off. The button is not responding. Does anyone know why?
The Identify button is grayed out. Don't know if this is normal?


In the logging I see messages coming into the messages.log giving me the idea that communication is going one side from the track to JMRI:

2024-12-07T21:01:23,175 jmrix.AbstractMRTrafficController

WARN - timeout flushes receive buffer: 0x0, 0x78, 0x78, 0x0, 0xff80, 0x78 [marklin.MarklinTrafficController Receive thread]

And this in the session.log

2024-12-07T21:01:21,173 jmrix.AbstractMRTrafficController WARN - Timeout on reply to message: 00 00 47 11 05 00 00 00 00 00 00 00 00 consecutive timeouts = 0 in marklin.MarklinTrafficController [marklin.MarklinTrafficController Transmit thread]


Any help or suggestions are highly appreciated!