 Joined: 20/10/2023(UTC) Posts: 3 Location: Attiki, Athens
|
Hello,
I want to update the firmware of my CS2 (60214) - hardware version 4.33
I did not use the device for many years so it still has the 1.4.0 (1) firmware version.
I try to install the latest firmware (4.2) using USB but the installation cannot be completed.
Someone told me that maybe this is because you cannot go from 1.4.0 directly to 4.2 and that I need to install first earlier versions.
Is this true? And if so, when can I get the earlier versions?
Thank you all
|
|
|
|
|
|
Joined: 16/02/2004(UTC)
Posts: 15,441
Location: DE-NW
|
|
Regards Tom --- "In all of the gauges, we particularly emphasize a high level of quality, the best possible fidelity to the prototype, and absolute precision. You will see that in all of our products." (from Märklin New Items Brochure 2015, page 1) ROFLBTCUTS  |
 1 user liked this useful post by H0
|
|
|
|
Joined: 20/10/2023(UTC) Posts: 3 Location: Attiki, Athens
|
On this link, opening the "CS2_update_Info_above_3_6_english.pdf" it says: "Load the following files from the Märklin Web page under http://www.maerklin.de/d...ds/software_updates.htmland store them in the main registry on this USB stick: cs2update.md5 cs2update.img" The thing is I cannot find these files there. Can someone suggest a link in order to find these two files for version 3.6 ?
|
|
|
|
|
|
 Joined: 23/07/2014(UTC) Posts: 8,464 Location: ENGLAND, Didcot
|
Originally Posted by: gbel78 
Can someone suggest a link in order to find these two files for version 3.6 ?
Don't worry about finding the files, just connect your cs2 to the internet and then tell it to do a network update. It will find all the neccessary files on the Marklin server and do both stages of the update. There are various points at which it will stop and ask for confirmation, but once it proceeds it will find everything it needs to update to the very latest release.
|
|
|
|
|
|
Joined: 20/10/2023(UTC) Posts: 3 Location: Attiki, Athens
|
I do the online update but it still sticks to 1.4.0 (1)
This is why I need to make a manual USB update and need the files.
|
|
|
|
|
|
Joined: 23/07/2014(UTC) Posts: 8,464 Location: ENGLAND, Didcot
|
Originally Posted by: gbel78 I do the online update but it still sticks to 1.4.0 (1)
This is why I need to make a manual USB update and need the files. I'll have a look around, I believe I still have the necessary file to update to 3.6.
|
1 user liked this useful post by kiwiAlan
|
|
|
|
Joined: 12/08/2006(UTC)
Posts: 9,273
|
You have very old version so i suppose you have not used CS2 for years?
Why not?
I think you will have problem by try to upgrade direct to 3.6 because it is a gigantic step up? |
H0
DCC = Digital Command Control
|
|
|
|
|
|
Joined: 23/07/2014(UTC) Posts: 8,464 Location: ENGLAND, Didcot
|
Originally Posted by: Goofy You have very old version so i suppose you have not used CS2 for years?
Why not?
I think you will have problem by try to upgrade direct to 3.6 because it is a gigantic step up? It is not a problem to do, it just needs the last of the old update files to do it. I have done it with a cs2 that had very early software on it.
|
|
|
|
|
|
Joined: 12/08/2006(UTC)
Posts: 9,273
|
Originally Posted by: kiwiAlan Originally Posted by: Goofy You have very old version so i suppose you have not used CS2 for years?
Why not?
I think you will have problem by try to upgrade direct to 3.6 because it is a gigantic step up? It is not a problem to do, it just needs the last of the old update files to do it. I have done it with a cs2 that had very early software on it. I have seen how ESU with theirs upgrades version must follow in every step by upgrade. I am possible sure TS will have problem by upgrade CS2. His old version must have been 10 years ago. |
H0
DCC = Digital Command Control
|
|
|
|
|
|
 Joined: 18/11/2007(UTC) Posts: 113
|
|
CS3+ 60216 ( SW:2.5.2 ) / CS2 60215 ( SW:4.3.0 ) / MS2 60653/57 ( SW:4.28 ) / MS1 60652 ( SW:1.8 AP ) / 60883 S88 LINK ( SW:1.1 )
MDT 3 (SW 3.6.0) - HW: ( 60970 / 60971 / 60801 ) & ESU LOKPROGRAMMER ( SW 5.2.12 ) / ESU HW: 53451 / 53900 / 53901
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
