Pantograph Springs Question

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Pantograph Springs Question - advice greatly appreciated

Options

View

Previous Topic Next Topic

mountainroads		#1 Posted : 05 March 2023 00:45:57(UTC) Retweet
Joined: 16/02/2021(UTC) Posts: 84 Location: Washington, Seattle		I have HO Express Loc 3039 which needs some replacement springs for the pantographs. (Purchased off of Ebay and it arrived with a couple missing.) I believe the pantograph is 7218, and the correct springs are E765600 ?? If so, there is a package currently for sale on Ebay at a very reasonable price, but the shipping cost is (IMO) ridiculous, as in more than $50, from Germany. I know, I know, how badly do I need the parts. I've tried using reverse unit and switch springs, but they don't seem to provide sufficient tension to give adequate upward force for good catenary contact. Any suggestions for alternate springs or if someone is willing to part with a couple would be greatly appreciated. Thanks in advance. - MR

1 user liked this useful post by mountainroads		marklinist5999
User Profile View All Posts by User View Thanks


	Wish to join the discussion?! Login to your marklin-users.net community \| Forum account or Register a new forum account. Or Connect via Facebook

dickinsonj		#2 Posted : 05 March 2023 01:25:02(UTC) Retweet
Joined: 05/12/2008(UTC) Posts: 1,797 Location: Crozet, Virginia		AJCKids in Texas can get them for you if you contact them with a specific request,. They have turned up some very scarce parts for me, although it can take a while for them to get into the US. Your best bet would obviously be Ebay in the US but I find that some parts are just not available there. That is when I contact the super helpful folks at AJCKids, who take care of the hassle of getting them from Marklin and their shipping to me is very reasonable.
		Regards, Jim I have almost all Märklin and mostly HO, although I do have a small number of Z gauge trains! So many trains and so little time.

1 user liked this useful post by dickinsonj		marklinist5999
User Profile View All Posts by User View Thanks

mountainroads		#3 Posted : 05 March 2023 04:54:18(UTC) Retweet
Joined: 16/02/2021(UTC) Posts: 84 Location: Washington, Seattle		Hi Jim: Thanks very much for the lead! - MR

1 user liked this useful post by mountainroads		dickinsonj
User Profile View All Posts by User View Thanks

Michael4		#4 Posted : 05 March 2023 10:03:41(UTC) Retweet
Joined: 02/02/2017(UTC) Posts: 694 Location: England, South Coast		I've always thought these must be available somewhere else...see attached, am I getting close? https://www.springsmfg.c...extension-springs-od2mm/ I'm working on a length of 10mm an outside diameter of the spring of 2mm and a guess at wire thickness. (for 7218) If anyone has a definitive spec can you post it?


User Profile View All Posts by User View Thanks

marklinist5999		#5 Posted : 05 March 2023 14:04:25(UTC) Retweet
Joined: 10/02/2021(UTC) Posts: 3,868 Location: Michigan, Troy		Yes, or you can call marklin USA and they will send it to you if you are in a rush.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.