Hi guys,

so I bought a BR103 a while back and it was sold as analog loco Märklin 3054. So I looked up what kind of motor fits it and LFCM seemed the right choice, so I also bough 60944 with mLD3 decoder.

So tonight was supposed to be the night to get the job done, but now that I opened the loco for the first time, the interiors look something else than anything I've seen before (so far).

There is motor labeled as Maxon and also some sort of chip... No reverse unit, or anything else I'm used to. I have uploaded a photo here:

https://drive.google.com...8CV2lI9/view?usp=sharing

Can anyone tell me what these components all are?

Also, will this Maxon engine work with the mLD3 decoder and if so, should I still replace it with the 60944, or is this Maxon engine any better?... Aaaand if it is, what is the motor type to configure the mLD3 with?

EDIT: One of the chips is this device https://www3.panasonic.b...etail&part_no=ATQ224

Thanks!

-Eino

Thanks!

So do I ditch the electronics and just connect the motor to the mLD3 directly?

This is the motor: Glockenankermotor Maxon 252060 which seems to be a DC motor.

Best,
-Eino

Here's the end result:



Still have to install LED's though. Also installed a longer pickupshoe since these 3 axel bogies can easily fit the 7185.

However, I only have the Mobile Station 2. I was able to set the correct motor type, but there is no way to initiate the automatic configuration. I still can set acceleration and deceleratin delays though.

Thanks!

-Eino