Hello all,
Peter wrote the right thing. I am exactly on the same line again after few hours testing the CS2. I also test CS2-PC program and now I realise that PC program is not yet ready at all.
PC program behaves in a strange way in many places while memory programming. Not always at the same way, so if you use CS2-PC, you have to be patient and carefull.
While I programmed memory sequence I couldn´t find answer to following thing, hope you can help me:
When I use EXT. conditions in triggering sequences how should I use them. I have tried to translante this German text:
++++++++++++++++++++++++++++++++++++++
"Fahrstraßen können von einem Ereignis, dem Auslöser, in Abhängigkeit
des Zustandes weiterer Rückmeldekontakte geschaltet werden. Ein Auslöser
ist ein Ereignis, die Bedingungen sind Zustände. Bei einem Auslöser
kann ein steigendes (belegt) oder fallendes (frei) Ereignis bestimmt werden.
Bei den Bedingungen kann festgelegt werden, ob ausgelöst (belegt)
oder nicht ausgelöst (frei) sein soll."
++++++++++++++++++++++++++++++++++++++
This text is from latest CS2 German version manual, they have not yet translated it for English spoken people.
I don´t understand how to use this conditional way to handle triggering. I have found that condition is like OR- in the trigger-execute-command inside CS2. There should be also AND-
I hope that there is some time in near future one new condition handling in S88 triggering, which is written in the CS2;
I would like to have flag or several flags so that whe flag is up I could put this information in memory and all behaviors in memory sequences would be depend on that flag. When Flag is up then all items will work and when flag is down nothing happens in that sequence.
I have made several flags with K84, but I cannot handle the effects via memory.
It should be so that one Flag would influence as many sequences as we need at that time.
With CS2 and its memory you can do quite complicated manuvers though.
Just remember that sef-learning feature is deceptive and that naming of all over memory items is really important.
Still one thing would be very usefull: If I only could toggle from inside of sequence, MANUAL/AUTOMATIC-button by which I choose should i use S88 triggering or not in sequences in that row to which that button refers.
Iĺl see you
Regards
Jukka