Joined: 12/07/2011(UTC) Posts: 1,068 Location: In a building site in Yeppoon
|
Afternoon all, I've been looking on and off for a few months now even trying ebay.uk (European union) but I can't find one that isn't one of those useless "multi" ones (US/UK/AUS/EU......etc). I personally can't stand them, there mostly dodgy and due to the "multi" design are not the most secure for mains power. I'm going to end up with at least 5 Marklin PSU's so instead of trying to find 4 or 5 more of the "single EU to AU" adaptors (it was a right pain to find that) I would rather get a 6 or 8 EU socket board and just use 1 high quality EU to AU adaptor. I don't really want to mangle the mains plugs if I can avoid it. In fact a EU power board would enable me to just "chop" the plug and replace it with a AU plug or even a IEC plug as I will end up running them through a spare 750W IBM UPS. That will enable me to regulate the mains to 230V as our Aussie mains power is more likely to run in the high 240 range. (I've regularly seen 256V at my place) Any chance of one of the kind lads in the UK or Europe sending me a link to 1 that I can buy ? Just a boring old 6 or 8 outlet EU power board. Thanks, Shane Edited by user 23 May 2014 07:44:09(UTC)
| Reason: Realised I had more PSU's than I thought |
Sad when its cheaper to buy a new 29640 starter set from Germany than a CS2 on its own in Oz, welcome to the joys of Marklin down under . |
|
|
|
Joined: 14/03/2005(UTC) Posts: 15,870 Location: Gibraltar, Europe
|
Hi Shane,
Try RS components. They have a large range of electrical accessories. Try filtering for the correct type of socket. |
Ray
Mostly Marklin.Selection of different eras and European railways Small C track layout, control by MS2, 100+ trains but run 4-5 at a time.
|
 1 user liked this useful post by RayF
|
|
|
Joined: 12/07/2011(UTC) Posts: 1,068 Location: In a building site in Yeppoon
|
Originally Posted by: RayF  Hi Shane,
Try RS components. They have a large range of electrical accessories. Try filtering for the correct type of socket. How do Ray, Assume I found the right mob, in UK as well as Aus....... couldn't find any power boards and only a 3 way EU plug.... plenty of adaptors though, guess I'll have to keep looking. Am I possibly chasseing the wrong thing ? like a " 8 (or whatever) way power board" is what there called here but should I be searching a different term in the UK/Europe ? I did stumble across a 4 socket EU board but I can't find anything bigger, I'd really prefer a 6 or 8 socket one. Thanks anyway Ray, much appreciated. |
Sad when its cheaper to buy a new 29640 starter set from Germany than a CS2 on its own in Oz, welcome to the joys of Marklin down under . |
|
|
|
Joined: 23/11/2007(UTC) Posts: 1,828 Location: Sydney, Australia
|
Hi Shane. Have you tried Gaugemaster? A while ago I bought a 16V AC trafo with AU plug from them. What I'm getting at is that they might have what you're after with an AU plug. |
Gary Z Scale "Never let the prototype get in the way of a good layout" |
 1 user liked this useful post by ozzman
|
|
|
Joined: 12/07/2011(UTC) Posts: 1,068 Location: In a building site in Yeppoon
|
Originally Posted by: ozzman  Hi Shane. Have you tried Gaugemaster? A while ago I bought a 16V AC trafo with AU plug from them. What I'm getting at is that they might have what you're after with an AU plug. Cheers Gary, I'll give them a go. |
Sad when its cheaper to buy a new 29640 starter set from Germany than a CS2 on its own in Oz, welcome to the joys of Marklin down under . |
|
|
|
Joined: 14/03/2005(UTC) Posts: 15,870 Location: Gibraltar, Europe
|
Originally Posted by: Shamu  Originally Posted by: RayF  Hi Shane,
Try RS components. They have a large range of electrical accessories. Try filtering for the correct type of socket. How do Ray, Assume I found the right mob, in UK as well as Aus....... couldn't find any power boards and only a 3 way EU plug.... plenty of adaptors though, guess I'll have to keep looking. Am I possibly chasseing the wrong thing ? like a " 8 (or whatever) way power board" is what there called here but should I be searching a different term in the UK/Europe ? I did stumble across a 4 socket EU board but I can't find anything bigger, I'd really prefer a 6 or 8 socket one. Thanks anyway Ray, much appreciated. Have a look at these: http://uk.rs-online.com/...er-distribution/0321483/ |
Ray
Mostly Marklin.Selection of different eras and European railways Small C track layout, control by MS2, 100+ trains but run 4-5 at a time.
|
 1 user liked this useful post by RayF
|
|
|
Joined: 15/03/2003(UTC) Posts: 9,593 Location: Australia
|
RS don't ship to Australia and they have a warehouse in Australia, but that item is not available to order. It MIGHT be possible to speak to one of the people in the Australian warehouse about a special order, but I don't like your chances... I did see them in stores in Sweden. This forum is full of Europeans, just ask one to buy one for you and ship it down here.. They can pick one up for you when they buy their groceries..  I am sure that they will do it for a modest fee via PayPal.. |
Adrian Australia flag by abFlags.com |
 1 user liked this useful post by xxup
|
|
|
Joined: 15/03/2003(UTC) Posts: 9,593 Location: Australia
|
|
Adrian Australia flag by abFlags.com |
|
|
|
Joined: 12/07/2011(UTC) Posts: 1,068 Location: In a building site in Yeppoon
|
Hi guys, I didn't click with what Gary was saying about Gauge Master. Though I could be wrong I've already got 6 Marklin SMPS' and 3 or 4 of the old ones (2 have AU plugs) but I'm just wanting to use a EU power board as it is the simplest/safest solution. It took me ages to find a straight forward single EU to AU power adaptor and I can't even remember where I got it from. Ray, As to RS Components, like Adrian said they won't ship here and there are no listings on their Australian site for any EU power boards, just some adaptors. Will keep looking for a little while longer otherwise might have to ask one of the lads to get one for me If I sling them the dosh for it |
Sad when its cheaper to buy a new 29640 starter set from Germany than a CS2 on its own in Oz, welcome to the joys of Marklin down under . |
|
|
|
Joined: 14/12/2002(UTC) Posts: 800 Location: Newcastle NSW Australia
|
Check out Conrads in Germany ,they also have/had a store in the UK , apart from a heap of modelling stuff I think their main sales are in electrical gear from TV to building products . Another place is BESTBUY mainly a appliance shop in Germany but a very large business including the kitchen sink for sale.
Cheers Tom in Oz
|
 1 user liked this useful post by Tom Jessop
|
|
|
Joined: 22/01/2012(UTC) Posts: 1,047
|
|
 2 users liked this useful post by Iamnotthecrazyone
|
|
|
Joined: 23/11/2007(UTC) Posts: 1,828 Location: Sydney, Australia
|
Originally Posted by: Shamu  Hi guys, I didn't click with what Gary was saying about Gauge Master. Though I could be wrong Hi Shane What I meant was that Gaugemaster sells stuff with AU plugs, and amongst the stuff they sell might be what you're after. |
Gary Z Scale "Never let the prototype get in the way of a good layout" |
|
|
|
Joined: 01/02/2012(UTC) Posts: 70 Location: Toronto
|
Hi Shamu.
I was in the same boat and ordered this unit from Amazon.ca (Canada). I have 220V Marklin power supplies with EU plugs and needed this for them (http://www.amazon.ca/gp/product/B000784H4K/ref=cm_cr_ryp_prd_ttl_sol_0). I plug this into a 110/220V mains step up transformer. Decent price/free shipping.
Fkowal
|
|
|
|
Joined: 12/07/2011(UTC) Posts: 1,068 Location: In a building site in Yeppoon
|
Originally Posted by: ozzman  Originally Posted by: Shamu  Hi guys, I didn't click with what Gary was saying about Gauge Master. Though I could be wrong Hi Shane What I meant was that Gaugemaster sells stuff with AU plugs, and amongst the stuff they sell might be what you're after. Hi Gary, Yeah that's what I thought you meant, confused myself |
Sad when its cheaper to buy a new 29640 starter set from Germany than a CS2 on its own in Oz, welcome to the joys of Marklin down under . |
|
|
|
Joined: 12/07/2011(UTC) Posts: 1,068 Location: In a building site in Yeppoon
|
Originally Posted by: fkowal  Hi Shamu.
I was in the same boat and ordered this unit from Amazon.ca (Canada). I have 220V Marklin power supplies with EU plugs and needed this for them (http://www.amazon.ca/gp/product/B000784H4K/ref=cm_cr_ryp_prd_ttl_sol_0). I plug this into a 110/220V mains step up transformer. Decent price/free shipping.
Fkowal Cheers mate, But I'm trying to avoid using one of those "universal/milti" power adaptors. Just want a straight recessed EU socket power board. Thanks anyway |
Sad when its cheaper to buy a new 29640 starter set from Germany than a CS2 on its own in Oz, welcome to the joys of Marklin down under . |
|
|
|
Joined: 22/01/2009(UTC) Posts: 14,875 Location: On 1965 Märklin Boulevard just around from Roco Square
|
did you find anything suitable from RS components Australia, if so I could order it for you and you pay me as I have an account with them.
John |
|
 1 user liked this useful post by river6109
|
|
|
Joined: 12/07/2011(UTC) Posts: 1,068 Location: In a building site in Yeppoon
|
Originally Posted by: river6109  did you find anything suitable from RS components Australia, if so I could order it for you and you pay me as I have an account with them.
John Hi John, They did on their UK site but nothing even close on the AU one with the exception of adaptors. Thanks all the same. I did find these and they are actually 5 socket ones, I asked to double check. http://cgi.ebay.com.au/w...em&item=251177580920So I've just got 2 of them, for $20 a pop I can't complain, I did spend a few hours going thru the German eBay site last night but the best I could find with shipping to Oz was pushing $60 for a 8 way board. I'll put a AU plug on 1 and a male IEC on the other. I could have got 1 of the all purpose (UK,EU,US,Japan to AU) boards for bugger all locally but being a retired electrical engineer I have a great dislike for the generally shoddy construction of the multi standard products. I won't even use them for a single product, I always get dedicated adaptors, there just generally so hard to find here. Having said that RS does have a good selection of dedicated adaptors just no power boards here in Australia. Thanks again for your offer though John And thanks to everyone else as well |
Sad when its cheaper to buy a new 29640 starter set from Germany than a CS2 on its own in Oz, welcome to the joys of Marklin down under . |
|
|
|
Joined: 25/07/2001(UTC) Posts: 11,165
|
|
Juhan - "Webmaster", at your service... He who asks a question is a fool for five minutes. He who does not ask a question remains a fool forever. [Old Chinese Proverb] |
|
|
|
Joined: 17/09/2006(UTC) Posts: 18,771 Location: New Zealand
|
|
|
|
|
Joined: 12/07/2011(UTC) Posts: 1,068 Location: In a building site in Yeppoon
|
Originally Posted by: Webmaster  Juhan, I'll be running all the PSU's through a IBM UPS with all the bells and whistles. Very sensible advice though, a important point with digital equipment. |
Sad when its cheaper to buy a new 29640 starter set from Germany than a CS2 on its own in Oz, welcome to the joys of Marklin down under . |
|
|
|
Joined: 12/07/2011(UTC) Posts: 1,068 Location: In a building site in Yeppoon
|
Originally Posted by: Bigdaddynz  Cheers David, I'd had a look thru their site but with postage was way too dear, I ended up getting 2 x 5 socket boards that I found on eBay UK for $40 the pair delivered. As to changing the plugs on the 6 or so PS' I've got, yes I could go that way but I didn't want to do that if I could avoid it. I've got 2 I think of the wall mount bricks but I doubt I'll ever use them except for a quick carpet bahn when the grandkids visit. Thanks kindly anyway squire. |
Sad when its cheaper to buy a new 29640 starter set from Germany than a CS2 on its own in Oz, welcome to the joys of Marklin down under . |
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.